Most common failures | No# failures |
---|
Rear reflector on motorcycle missing |1.4.1| | 12 |
Headlamp aim out of alignment | 9 |
Drive chain excessively loose |6.2.1d| | 8 |
Registration plate issues | 7 |
Rear Rear reflector on motorcycle missing |1.4.1| | 5 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 4 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 4 |
Horn not working |1.7.3a| | 4 |
Rear suspension bearing has excessive free play |2.4.A2a|i|| | 4 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 4 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
Drive chain worn to excess |6.2.1e| | 4 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 4 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 3 |
Handlebar deformed |2.1.1b| | 3 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 3 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Rear Wheel spoke excessively loose |4.2.1b| | 3 |
Horn not loud enough to be heard by another road user |1.7.3a| | 3 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 3 |
Rear Brake pedal has inadequate reserve travel |3.1.3b| | 3 |
Steering headbearing has excessive free play |2.2.2| | 3 |
Fuel cap sealing washer missing |7.2.2c| | 2 |
Drive chain excessively tight |6.2.1d| | 2 |
Rear Front mudguard insecure |2.3.7| | 2 |
Rear Shock absorber has negligible damping effect (5.3.2 (b)) | 2 |
Rear reflector missing (4.8.2 (a) (ii)) | 2 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 2 |
Rear Footrest missing |6.2.1a| | 2 |
Direction indicators not working |1.5.1c| | 2 |
Centre Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 2 |
Nearside Direction indicators not working |1.5.1c| | 2 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 2 |
Front Wheel spoke excessively loose |4.2.1b| | 2 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 2 |
Front wheel bearings have excessive free play |2.3.5b| | 2 |
Front Wheel has an excessively eccentric bead rim. |4.2.2| | 2 |
Steering movement excessively rough with the wheel raised |2.2.1b| | 2 |
Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 2 |
Rear Drive chain sprocket carrier worn to excess |6.2.1e| | 2 |
Rear Brake back plate|s| securing bolt|s| missing |3.2.A1j| | 1 |
Rear Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
Rear Rear wheel spindle securing nut|s| loose |2.4.A.2b| | 1 |
Offside Rear Brake back plate|s| securing bolt|s| missing |3.2.A1j| | 1 |
Upper Steering headbearing has excessive free play |2.2.2| | 1 |
Lower Steering headbearing has excessive free play |2.2.2| | 1 |
Nearside Front Horn control defective |1.7.2a| | 1 |
Headlamp aim beam image kick up to the offside |1.6| | 1 |
Headlamp aim beam image kick-up is to the offside |1.6.1| | 1 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Nearside Front Direction indicator not working |1.5.1c| | 1 |
Offside Front Direction indicator missing |1.5.1a| | 1 |
Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Headlamp insecure |1.2.3b| | 1 |
Front position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Nearside Front Direction indicators not working |1.5.1c| | 1 |
Nearside Rear Direction indicators not working |1.5.1c| | 1 |
Rear Drive chain excessively tight |6.2.1d| | 1 |
Nearside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Rear Brake locking device missing |3.2.A1e| | 1 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Offside Rear Footrest insecure |6.2.1a| | 1 |
Front Horn not working |1.7.3a| | 1 |
Centre Rear Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Offside Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Centre Front Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Rear Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Front Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
Rear Brake linkage has abnormal movement due to excessive wear |3.2.A1i| | 1 |
Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Front position lamp deteriorated and function impaired |1.1.1b| | 1 |
Offside Direction indicators not working |1.5.1c| | 1 |
Brake lever is damaged and the brake cannot be readily applied |3.1.3c| | 1 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Front Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Front Front wheel spindle loose |2.3.3a| | 1 |
Rear suspension bush excessively deteriorated |2.4.A2a|i|| | 1 |
Rear Direction indicator obviously incorrectly positioned (4.4.3 (a)) | 1 |
Offside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Fuel cap does not fasten securely maintaining the sealing arrangement |7.2.2b| | 1 |
Front wheel bearings are excessively rough |2.3.5b| | 1 |
Front Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
Rear Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
Headlamp main beam affected by the operation of another lamp |1.2.2c| | 1 |
Rear Wheel spoke excessively bent |4.2.1b| | 1 |
Front wheel insecure front wheel bearings |4.2.3b| | 1 |
Rear suspension bush has excessive free play rear suspension linkage worn |2.4.A2a|i|| | 1 |
Front suspension assembly component loose |2.3.1| | 1 |
Front Brake component worn and seriously reduced in strength |3.2.A1| | 1 |
Nearside Rear Direction indicator not working |1.5.1c| | 1 |
Rear position lamp insecure |1.1.1c| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |
Rear Rear position lamp insecure |1.1.1c| | 1 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 1 |
Rear reflector on motorcycle incorrectly positioned |1.4.2d| | 1 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
Stop lamp affected by the operation of the horn |1.3.2| | 1 |
Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
Brake pedal insecure |3.1.2a| | 1 |
Rear Brake cable badly frayed |3.2.A1b| | 1 |
Rear Wheel has an excessively eccentric bead rim. |4.2.2| | 1 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 1 |
Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 1 |
Rear Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Inner Fuel cap sealing washer missing |7.2.2c| | 1 |
Front Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Rear mono-shock pivot excessively worn |2.4.B.4| | 1 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Drive chain sprocket carrier worn to excess |6.2.1e| | 1 |
Drive chain sprocket worn to excess |6.2.1e| | 1 |
Front Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
Rear suspension movement is excessively stiff |2.4.A.3b| | 1 |
Rear Brake lining|s| less than 1.5 mm thick |3.2.A1f|i|| | 1 |
Rear Rear mono-shock pivot excessively worn |2.4.B.4| | 1 |
Offside Rear Upper Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Offside Rear Lower Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Nearside Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
Centre Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Nearside Rear Drive chain excessively loose |6.2.1d| | 1 |
Lower Rear mono-shock pivot excessively worn |2.4.B.4| | 1 |
Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Front shock absorber seal failed and leaking oil |2.3.3| | 1 |