Most common failures | No# failures |
---|
Rear reflector on motorcycle missing |1.4.1| | 10 |
Headlamp aim out of alignment | 8 |
Exhaust is leaking and excessively noisey |7.1.1b| | 5 |
Registration plate issues | 3 |
Rear Position lamp not working (4.2.1 (a)) | 3 |
Headlamp aim beam image kick up to the offside |1.6| | 2 |
Front suspension assembly excessive wear or free play in a front suspension component |2.3.4| | 2 |
Stop lamp affected by the operation of another lamp |1.3.2| | 2 |
Direction indicators affected by the operation of another lamp |1.5.1c| | 2 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
Offside Rear Direction indicator not working |1.5.1c| | 2 |
Rear Brake lever has inadequate reserve travel |3.1.3b| | 2 |
Nearside Rear Direction indicator missing |1.5.1a| | 1 |
Offside Rear Direction indicator missing |1.5.1a| | 1 |
Rear Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Nearside Rear Direction indicators not working |1.5.1c| | 1 |
Offside Rear Direction indicators not working |1.5.1c| | 1 |
Rear Direction indicator obviously incorrectly positioned closer then 180mm (4.4.3 (a)) | 1 |
Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Stop lamp affected by the operation of the horn |1.3.2| | 1 |
Rear wheel insecure |4.2.3b| | 1 |
Nearside Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Indicator tell tale not functioning |1.5.2| | 1 |
Front Headlamp missing |1.2.3a| | 1 |
Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Front Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Nearside Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
Offside Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Rear Wheel fixing loose (multiple fixings) REAR WHEEL NUT LOOSE (5.2.1 (a) (i)) | 1 |
Horn not working (7.7 (a) (ii)) | 1 |
Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
Fuel cap does not fasten securely maintaining the sealing arrangement |7.2.2b| | 1 |
Horn control not functioning. |1.7.2b| | 1 |
Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Rear Brake drum|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Fuel cap sealing washer missing |7.2.2c| | 1 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Horn not working (7.7 (a)) | 1 |
Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Horn not working |7.7 |a| |ii|| | 1 |
Nearside Front Direction indicator not working |4.4.1 |a| |ii|| | 1 |
Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Brake lever cannot be applied smoothly |3.1.3d| | 1 |
Rear Brake effort inadequate at a wheel (1.2.1 (a) (i)) | 1 |
Front wheel bearings have excessive free play |2.3.5b| | 1 |
Exhaust excessively deteriorated |7.1.1a| | 1 |
Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Horn not working |1.7.3a| | 1 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Front Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |
Fuel cap mounting flange/sealing method defective |7.2.2c| | 1 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Front Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Front Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Nearside Rear Direction indicator not working |1.5.1c| | 1 |
Nearside Front Direction indicator missing |1.5.1a| | 1 |
Rear position lamp insecure |1.1.1c| | 1 |
Stop lamp insecure |1.3.3b| | 1 |
Rear Front mudguard insecure |2.3.7| | 1 |
Front wheel bearings are excessively rough |2.3.5b| | 1 |
Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
Front Position lamp not working (4.2.1 (a)) | 1 |
All direction indicators not working (4.4.1 (a) (ii)) | 1 |
Headlamp aim projected beam image obviously incorrect (4.1.2 (c)) | 1 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Offside Front Direction indicator missing |1.5.1a| | 1 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Rear Brake lining|s| less than 1.5 mm thick |3.2.A1f|i|| | 1 |