| Most common failures | No# failures |
|---|
| Registration plate issues | 174 |
| Headlamp aim out of alignment | 137 |
| Rear reflector on motorcycle missing |1.4.1| | 133 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 42 |
| Horn not working |1.7.3a| | 41 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 39 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 35 |
| Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 33 |
| Front wheel bearings are excessively rough |2.3.5b| | 29 |
| Front wheel bearings have excessive free play |2.3.5b| | 24 |
| Headlamp aim beam image kick up to the offside |1.6| | 22 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 19 |
| Rear Rear reflector on motorcycle missing |1.4.1| | 19 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 19 |
| Drive chain excessively loose |6.2.1d| | 18 |
| Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 18 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 17 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 15 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 15 |
| Front Front wheel bearings have excessive free play |2.3.5b| | 14 |
| Direction indicators flashing more than 120 times per minute |1.5.1c| | 14 |
| Drive chain excessively tight |6.2.1d| | 14 |
| Registration plate lamp issues | 13 |
| Rear reflector missing (4.8.2 (a) (ii)) | 13 |
| Exhaust markings indicating not for road use or similar wording |7.1.4| | 13 |
| Front Floor brake test indicates a binding brake |3.3.C2c| | 12 |
| Offside Front Direction indicator not working |1.5.1c| | 12 |
| Horn not loud enough to be heard by another road user |1.7.3a| | 10 |
| Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 10 |
| Nearside Rear Direction indicator not working |1.5.1c| | 10 |
| Horn not working |7.7 |a| |ii|| | 9 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 9 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 8 |
| Offside Front Footrest insecure |6.2.1a| | 8 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 8 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 8 |
| Front Hydraulic brake control feels spongy |3.1.4a| | 7 |
| Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 7 |
| Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 7 |
| Drive chain worn to excess |6.2.1e| | 7 |
| Front Roller brake test indicates a sticking brake |3.3.A1a| | 7 |
| Rear reflector missing |4.8.2 |a| |ii|| | 7 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 7 |
| Nearside Front Direction indicators not working |1.5.1c| | 6 |
| Front Front wheel bearings are excessively rough |2.3.5b| | 6 |
| Rear Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 6 |
| Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 6 |
| Offside Rear Direction indicator not working |1.5.1c| | 6 |
| Wheel alignment incorrect which adversely affects the handling |2.5.1| | 6 |
| Nearside Front Footrest insecure |6.2.1a| | 6 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 5 |
| Nearside Rear Direction indicator obscured |1.5.1a| | 5 |
| Offside Rear Direction indicator obscured |1.5.1a| | 5 |
| Offside Rear Direction indicator incorrect colour |1.5.1b| | 5 |
| Nearside Front Direction indicator not working |1.5.1c| | 5 |
| Front Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 5 |
| Rear Rear reflector missing (4.8.2 (a) (ii)) | 5 |
| Rear Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 5 |
| Brake lever has inadequate reserve travel |3.1.3b| | 5 |
| Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 5 |
| Front Brake lever has inadequate reserve travel |3.1.3b| | 5 |
| Nearside Front Direction indicator incorrect colour |1.5.1b| | 5 |
| Front position lamp incorrect colour |1.1.2a| | 4 |
| Rear reflector on motorcycle incorrectly positioned |1.4.2d| | 4 |
| Rear Brake disc|s| excessively worn |3.2.A1l| | 4 |
| Rear Exhaust markings indicating not for road use or similar wording |7.1.4| | 4 |
| Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 4 |
| Throttle operating incorrectly |6.2.1f| | 4 |
| Horn not working (7.7 (a) (ii)) | 4 |
| Rear Stop lamp not working (4.3.1 (a) (ii)) | 4 |
| Riders seat insecure |6.2.1a| | 4 |
| Rear Exhaust is leaking and excessively noisey |7.1.1b| | 4 |
| Front Brake excessively binding (1.2.1 (f)) | 4 |
| Offside Front Direction indicator incorrect colour |1.5.1b| | 4 |
| Stop lamp affected by the operation of another lamp |1.3.2| | 4 |
| Front Floor brake test indicates a sticking brake |3.3.C2c| | 4 |
| Front Wheel has an excessively distorted bead rim. |4.2.2| | 3 |
| Offside Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 3 |
| Offside Direction indicator flashing more than 120 times per minute |1.5.1c| | 3 |
| Rear Roller brake test indicates a sticking brake |3.3.A1a| | 3 |
| Rear Stop lamp remains on when the brake is released |1.3.1e| | 3 |
| Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 3 |
| Nearside Rear Direction indicator not working |4.4.1 |a| |ii|| | 3 |
| Front Wheel bearing rough when rotated |5.1.3 |b| |i|| | 3 |
| Rear Direction indicator obscured |1.5.1a| | 3 |
| Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 3 |
| Nearside Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 3 |
| Nearside Direction indicators flashing more than 120 times per minute |1.5.1c| | 3 |
| Nearside Rear Direction indicator incorrect colour |1.5.1b| | 3 |
| Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
| Nearside Rear Direction indicators not working |1.5.1c| | 3 |
| Front Brake disc|s| has excessive run out |3.2.A1m| | 3 |
| Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 3 |
| Rear Stop lamp does not emit a steady light |1.3.1b| | 3 |
| Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 3 |
| Rear Drive chain excessively loose |6.2.1d| | 3 |
| Rear Drive chain sprocket worn to excess |6.2.1e| | 3 |
| Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
| Front Horn not working |1.7.3a| | 3 |
| Nearside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 3 |