Most common failures | No# failures |
---|
Headlamp aim out of alignment | 13 |
Rear reflector on motorcycle missing |1.4.1| | 10 |
Registration plate issues | 10 |
Horn not working |1.7.3a| | 4 |
Rear reflector missing (4.8.2 (a) (ii)) | 3 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 3 |
Horn not working (7.7 (a) (ii)) | 2 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
Front Position lamp not working (4.2.1 (a)) | 2 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 2 |
Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 2 |
Rear Rear reflector on motorcycle missing |1.4.1| | 2 |
Nearside Drive chain worn to excess (6.1.7 (c) (i)) | 1 |
Nearside Drive chain excessively loose (6.1.7 (c) (i)) | 1 |
Drive chain excessively loose |6.2.1d| | 1 |
Front Brake master cylinder leaking (1.1.10 (b) (ii)) | 1 |
Nearside Front Brake caliper leaking (1.1.16 (b) (i)) | 1 |
Offside Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
Steering headbearing in such a condition that steering control is adversely affected Steering very notchy in central position |2.2.2 |f| |ii|| | 1 |
Exhaust has part of the system missing |7.1.1a| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Offside Footrest insecure |6.2.1a| | 1 |
Throttle control functioning such that safe operation of the motorcycle is adversely affected (6.2.7 (a) (ii)) | 1 |
Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Front Brake hose stretched by suspension movement |3.2.B3b| | 1 |
Drive chain excessively tight |6.2.1d| | 1 |
Horn missing |1.7.1| | 1 |
Headlamp incorrect colour |1.2.1| | 1 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Rear wheel spindle securing nut locking device insecure |2.4.A.2b| | 1 |
Front Brake excessively binding (1.2.1 (f)) | 1 |
Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Front Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
Nearside Front Direction indicators not working |1.5.1c| | 1 |
Offside Front Lower Front suspension assembly component cracked (2.3.1) | 1 |
Nearside Front Lower Front suspension assembly component cracked (2.3.1) | 1 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Rear Brake pedal cannot be applied smoothly |3.1.3d| | 1 |
Horn control not functioning. |1.7.2b| | 1 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a)) | 1 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Rear Stop lamp switch with a delay in operation (4.3.2 (a) (ii)) | 1 |
All direction indicators light intensity significantly reduced (4.4.3 (a)) | 1 |
Stop lamp light intensity significantly reduced (4.3.3 (a) (ii)) | 1 |
Drive chain excessively loose (6.1.7 (c) (i)) | 1 |
Motorcycle structure joining/attachment plate or fastening insecure Rear mud guard (6.1.1 (b) (i)) | 1 |