MOT History from tests of petrol SUZUKI SAVAGEs year 1988

Review the list of common SUZUKI SAVAGE failures below or to perform a specific mot history check on your SUZUKI then use our popular KnowYourCar service

mot history

Pass percent:78.13%

(The average a petrol SUZUKI SAVAGE year 1988 passes without issue)

Based on:64 MOT Tests

Most common failures	No# failures
Front Stop lamp remains on when the brake is released \|1.3.1e\|	2
Headlamp aim out of alignment	2
Front Brake caliper\|s\| securing bolt\|s\| loose \|3.2.A1j\|	1
Headlamp aim beam image kick up to the offside \|1.6\|	1
Steering movement excessively stiff with the wheel raised \|2.2.1b\|	1
Steering movement excessively `notchy` with the wheel raised \|2.2.1b\|	1
Horn replaced by a gong \|1.7.3b\|	1
Offside Rear Direction indicator not working \|1.5.1c\|	1
Nearside Front shock absorber seal failed and leaking oil \|2.3.3\|	1
Nearside Rear Footrest insecure \|6.2.1a\|	1
Front Brake lining(s) less than 1.0 mm thick (1.1.13 (a))	1
Offside Rear Direction indicator missing (4.4.1 (a) (ii))	1
Nearside Rear Direction indicator missing (4.4.1 (a) (ii))	1
Motorcycle structure adversely modified and not allowing for battery sucurity \|6.1.1b\|	1
Offside Footrest insecure pin broken \|6.2.1a\|	1
Nearside Front Direction indicator not working (4.4.1 (a) (ii))	1
Front Stop lamp not working (4.3.1 (a) (ii))	1
Front Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	1
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition \|7.1.2\|	1
Offside Footrest insecure \|6.2.1a\|	1
Rear Brake excessively binding (1.2.1 (f))	1
Rear Stop lamp not working (4.3.1 (a) (ii))	1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Most common failures	No# failures
Front Stop lamp remains on when the brake is released \|1.3.1e\|	2
Headlamp aim out of alignment	2
Front Brake caliper\|s\| securing bolt\|s\| loose \|3.2.A1j\|	1
Headlamp aim beam image kick up to the offside \|1.6\|	1
Steering movement excessively stiff with the wheel raised \|2.2.1b\|	1
Steering movement excessively `notchy` with the wheel raised \|2.2.1b\|	1
Horn replaced by a gong \|1.7.3b\|	1
Offside Rear Direction indicator not working \|1.5.1c\|	1
Nearside Front shock absorber seal failed and leaking oil \|2.3.3\|	1
Nearside Rear Footrest insecure \|6.2.1a\|	1
Front Brake lining(s) less than 1.0 mm thick (1.1.13 (a))	1
Offside Rear Direction indicator missing (4.4.1 (a) (ii))	1
Nearside Rear Direction indicator missing (4.4.1 (a) (ii))	1
Motorcycle structure adversely modified and not allowing for battery sucurity \|6.1.1b\|	1
Offside Footrest insecure pin broken \|6.2.1a\|	1
Nearside Front Direction indicator not working (4.4.1 (a) (ii))	1
Front Stop lamp not working (4.3.1 (a) (ii))	1
Front Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	1
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition \|7.1.2\|	1
Offside Footrest insecure \|6.2.1a\|	1
Rear Brake excessively binding (1.2.1 (f))	1
Rear Stop lamp not working (4.3.1 (a) (ii))	1

MOT History from tests of petrol SUZUKI SAVAGEs year 1988

Find us on Facebook