Most common failures | No# failures |
---|
Headlamp aim out of alignment | 63 |
Drive chain excessively loose |6.2.1d| | 32 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 14 |
Drive chain excessively loose (6.1.7 (c) (i)) | 12 |
Drive chain worn to excess |6.2.1e| | 12 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 10 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 9 |
Rear reflector missing (4.8.2 (a) (ii)) | 9 |
Rear reflector on motorcycle missing |1.4.1| | 7 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 7 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 6 |
Registration plate issues | 6 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 5 |
Stop lamp not working (4.3.1 (a) (ii)) | 5 |
Drive chain excessively loose (6.2.1d) | 5 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 5 |
Front wheel bearings are excessively rough |2.3.5b| | 5 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 5 |
Drive chain excessively tight |6.2.1d| | 4 |
Drive chain horseshoe locking device incorrectly fitted (6.1.7 (j) (i)) | 4 |
Front wheel bearings have excessive free play |2.3.5b| | 4 |
Horn not working |1.7.3a| | 4 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
Drive chain worn to excess (6.1.7 (c) (i)) | 3 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 3 |
Drive chain excessively tight (6.1.7 (k) (i)) | 3 |
Rear Position lamp not working (4.2.1 (a)) | 3 |
Rear reflector on motorcycle obscured |1.4.2b| | 3 |
Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 3 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Rear reflector on motorcycle obscured |1.4.1| | 3 |
Throttle operating incorrectly |6.2.1f| | 3 |
Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 2 |
Rear Brake pedal has insufficient reserve travel (1.1.2 (a)) | 2 |
Headlamp insecure (4.1.1 (c)) | 2 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 2 |
Front Wheel bearing has excessive play |5.1.3 |a| |i|| | 2 |
Rear Position lamp not working |4.2.1 |a|| | 2 |
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 2 |
Drive chain sprocket worn to excess (6.1.7 (c) (i)) | 2 |
Headlamp not working on main beam (4.1.1 (a) (ii)) | 2 |
Handlebar deformed |2.1.1b| | 2 |
Rear reflector missing |4.8.2 |a| |ii|| | 2 |
Front Horn not working (7.7 (a) (ii)) | 2 |
Front Front wheel bearings have excessive free play |2.3.5b| | 2 |
Rear Rear reflector on motorcycle missing |1.4.1| | 2 |
Rear Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 2 |
Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 2 |
Stop lamp remains on when the brakes are released | 2 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 2 |
Drive chain excessively loose |6.1.7 |c| |i|| | 2 |
Rear Rear reflector missing (4.8.2 (a) (ii)) | 2 |
Registration plate lamp issues | 2 |
Front Stop lamp does not illuminate immediately a brake applies (1.3.1a) | 1 |
Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a) | 1 |
Throttle control functioning such that safe operation of the motorcycle is adversely affected (6.2.7 (a) (ii)) | 1 |
Stop lamp not working Rear pedal (4.3.1 (a) (ii)) | 1 |
Rear Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Rear Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Rear Floor brake test indicates a severely juddering brake |3.3C2d.| | 1 |
Nearside Rear Direction indicator not working |1.5.1c| | 1 |
Rear Rear reflector missing |4.8.2 |a| |ii|| | 1 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Rear Suspension attachment bracket/mounting insecure (5.3.3 (a) (i)) | 1 |
Rear Direction indicator not working |4.4.1 |a| |ii|| | 1 |
Front Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Centre Rear Rear position lamp does not illuminate immediately when it is switched on (1.1.3a) | 1 |
Rear Rear position lamp does not illuminate immediately when it is switched on (1.1.3a) | 1 |
Drive chain worn to excess chain & sprockets. (6.2.1e) | 1 |
Lower Rear shock absorber insecurely mounted fixing point brocken . (2.4.A.3b) | 1 |
Front brake disc in such a condition that it is seriously weakened | 1 |
Drive chain so worn it is likely to fail (6.1.7 (c) (ii)) | 1 |
Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Headlamp aim not tested (4.1.2 (b)) | 1 |
Handlebar deformed to the extent that steering is affected (2.2.1 (c) (ii)) | 1 |
Wheel alignment incorrect which adversely affects the handling (2.4 (a)) | 1 |
Headlamp light intensity severely reduced No pattern (4.1.4 (a)) | 1 |
Drive chain excessively loose |ADJUSTED| |6.1.7 |c| |i|| | 1 |
Rear reflector missing obscured by l-plate (4.8.2 (a) (ii)) | 1 |
Horn not working (7.7 (a) (ii)) | 1 |
Front Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |
Front Wheel spoke excessively loose (5.2.2 (d)) | 1 |
Horn not working (7.7 (a)) | 1 |
Front Shock absorber has a serious fluid leak fork seals (5.3.2 (b)) | 1 |
Front Brake caliper leaking (1.1.16 (b) (i)) | 1 |
Brake disc contaminated (1.1.14 (b)) | 1 |
Front wheel bearings are excessively rough (2.3.5b) | 1 |
Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Offside Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Nearside Handlebar grip insecure to handlebar |2.2.1 |d| |ii|| | 1 |
Headlamp insecure |4.1.1 |c|| | 1 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
Headlamp aim not tested dip beam does not illuminate when switched on |1.6| | 1 |
Rear Shock absorber insecurely attached snapped (5.3.2 (a) (i)) | 1 |
Nearside Front Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |
Rear reflector on motorcycle incorrectly positioned |1.4.2d| | 1 |
Front Brake lever has insufficient reserve travel (1.1.2 (a)) | 1 |
Chain guard insecure (6.1.7 (i)) | 1 |
Inner Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Front Hydraulic brake control feels spongy |3.1.4a| | 1 |
Throttle operating incorrectly (6.2.7 (a) (i)) | 1 |
Nearside Rear Drive chain sprocket so worn it is likely to fail (6.1.7 (c) (ii)) | 1 |
Front Wheel alignment incorrect which adversely affects the handling (2.4 (a)) | 1 |
Rear Rear shock absorber insecurely mounted |2.4.A.3b| | 1 |
Front position lamp flickers when tapped lightly by hand |1.1.3c| | 1 |
Nearside Rear Footrest insecure (6.2.12 (a)) | 1 |
Offside Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Nearside Direction indicators not working |1.5.1c| | 1 |
Drive chain excessively tight, so that it is likely to fail (6.1.7 (k) (ii)) | 1 |
Drive chain sprocket worn to excess |6.2.1e| | 1 |
Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 1 |
Nearside Front suspension assembly component excessively corroded. |2.3.1| | 1 |
Offside Front suspension assembly component excessively corroded. |2.3.1| | 1 |
Offside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Rear Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |
Wheel alignment incorrect which adversely affects the handling (2.5.1) | 1 |
Rear reflector on motorcycle obscured (1.4.1) | 1 |
Brake performance not tested (1.2.1 (g)) | 1 |
Front Outer Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Riders seat insecure (6.2.5 (a) (ii)) | 1 |
Offside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Indicator switch insecure |1.5.4| | 1 |
Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |
Stop lamp does not illuminate immediately a brake applies From either control |1.3.1a| | 1 |
Front Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
Front Headlamp aim projected beam image obviously incorrect (4.1.2 (c)) | 1 |
Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
Headlamp not working on main beam |4.1.1 |a| |ii|| | 1 |
Front Front wheel bearings are excessively rough |2.3.5b| | 1 |
Rear Drive chain excessively loose |6.2.1d| | 1 |
Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Handlebar excessively deformed |2.2.1 |c| |i|| | 1 |
Rear Footrest missing (6.2.12 (a)) | 1 |
Rear Drive chain worn to excess |6.2.1e| | 1 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Rear Brake excessively binding (1.2.1 (f)) | 1 |
Nearside Rear Direction indicator insecure |1.5.3b| | 1 |
Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Front Brake component is excessively corroded |3.1.5| | 1 |
Front Lower Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 1 |
Fuel pipe leaking (6.1.3 (b) (i)) | 1 |
Nearside Rear Footrest missing (6.2.12 (a)) | 1 |
Offside Rear Footrest missing (6.2.12 (a)) | 1 |
Front Stop lamp missing |1.3.3a| | 1 |
Rear Stop lamp missing |1.3.3a| | 1 |
Nearside Handlebar deformed |2.1.1b| | 1 |
Centre Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Offside Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Nearside Drive chain excessively loose |6.2.1d| | 1 |
Front Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Offside Front Brake lever has insufficient reserve travel |1.1.2 |a|| | 1 |
Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Offside Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Front Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Chain guard insecure |6.2.1c| | 1 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Rear Brake pedal cannot be released smoothly |3.1.3d| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |
Central Rear Upper Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Nearside Rear Drive chain excessively tight |6.2.1d| | 1 |
Drive chain worn to excess (6.2.1e) | 1 |
Steering movement excessively `notchy` with the weight on the lower bearing self centre |2.2.1a| | 1 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Brake pedal has insufficient reserve travel |1.1.2 |a|| | 1 |
Stop lamp not working with front brake lever (4.3.1 (a) (ii)) | 1 |
Throttle operating incorrectly sticking (6.2.7 (a) (i)) | 1 |
Nearside Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |
Nearside Rear Drive chain worn to excess |6.2.1e| | 1 |
Nearside Front Upper Handlebar deformed |2.1.1b| | 1 |
Central Rear Lower Rear mono-shock insecure |2.4.B.4| | 1 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Drive chain worn to excess |6.1.7 |c| |i|| | 1 |
Front Drive chain sprocket worn to excess |6.1.7 |c| |i|| | 1 |
Rear Drive chain sprocket worn to excess |6.1.7 |c| |i|| | 1 |
Rear Stop lamp switch with a delay in operation (4.3.2 (a) (ii)) | 1 |
Front Stop lamp switch with a delay in operation (4.3.2 (a) (ii)) | 1 |
Rear Drive chain sprocket worn to excess (6.1.7 (c) (i)) | 1 |
Front Direction indicator not working |1.5.1c| | 1 |
Rear Motorcycle structure excessively damaged |6.1.1a| | 1 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Direction indicators not working |1.5.1c| | 1 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Riders seat insecure |6.2.1a| | 1 |
Rear Wheel bearing has excessive play |5.1.3 |a| |i|| | 1 |
Nearside Rear Drive chain excessively loose (6.2.1d) | 1 |
All position lamps not working (4.2.1 (a)) | 1 |
Rear Stop lamp remains on when the brake is released (1.3.1e) | 1 |
Rear Brake pedal so insecure that the brake cannot be readily applied (1.1.2 (e) (ii)) | 1 |
Central Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
Front Brake disc contaminated (1.1.14 (b)) | 1 |
Footrest missing Both rear (6.2.12 (a)) | 1 |
Fuel pipe leaking under tank breather (6.1.3 (b) (i)) | 1 |