| Most common failures | No# failures |
|---|
| Rear reflector on motorcycle missing |1.4.1| | 21 |
| Headlamp aim out of alignment | 13 |
| Registration plate issues | 11 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 9 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 8 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 7 |
| Front wheel bearings are excessively rough |2.3.5b| | 7 |
| Horn not working |1.7.3a| | 6 |
| Rear Rear reflector on motorcycle missing |1.4.1| | 4 |
| Drive chain excessively loose |6.2.1d| | 4 |
| Drive chain excessively tight |6.2.1d| | 4 |
| Horn not loud enough to be heard by another road user |1.7.3a| | 4 |
| Headlamp main beam affected by the operation of another lamp |1.2.2c| | 3 |
| Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 3 |
| Stop lamp affected by the operation of another lamp |1.3.2| | 3 |
| Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
| Rear Brake disc|s| cracked |3.2.A1g| | 3 |
| Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 3 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 3 |
| Front Brake lever has inadequate reserve travel |3.1.3b| | 2 |
| Nearside Rear Direction indicator not working |1.5.1c| | 2 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
| Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
| Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
| Rear Footrest missing |6.2.1a| | 2 |
| Rear Drive chain sprocket worn to excess |6.2.1e| | 2 |
| Nearside Front Direction indicator not working |1.5.1c| | 2 |
| All position lamps adversely affected by the operation of another lamp |1.1.3b| | 2 |
| Horn not working (7.7 (a) (ii)) | 2 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 2 |
| Drive chain worn to excess |6.2.1e| | 2 |
| Offside Front Direction indicator not working |1.5.1c| | 2 |
| Horn is not a constant note |1.7.3c| | 2 |
| Front wheel bearings have excessive free play |2.3.5b| | 2 |
| Front Position lamp not working (4.2.1 (a)) | 2 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
| Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 2 |
| Front Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 2 |
| Front Headlamp main beam affected by the operation of another lamp |1.2.2c| | 2 |
| Nearside Front Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
| Central Front Horn sound not in accordance with requirements |7.7 |c|| | 1 |
| Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
| Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
| Brake lever pivots excessively worn |3.1.3a| | 1 |
| Offside Rear Direction indicator insecure |1.5.3b| | 1 |
| Front Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
| Rear Rear reflector missing (4.8.2 (a) (ii)) | 1 |
| Rear Brake has no recorded effort at a wheel (1.2.1 (a) (ii)) | 1 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Nearside Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Offside Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Offside Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 1 |
| Nearside Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
| Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Rear Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
| Headlamp switch insecure |1.2.4| | 1 |
| Nearside Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
| Front position lamp incorrect colour |1.1.2a| | 1 |
| Front Front mudguard insecure |2.3.7| | 1 |
| Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
| All position lamps adversely affected by the operation of the horn |1.1.3b| | 1 |
| Brake lever cannot be applied smoothly |3.1.3d| | 1 |
| Rear Drive chain worn to excess |6.2.1e| | 1 |
| Offside Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Front Brake hose leaking fluid |3.2.B4| | 1 |
| Drive chain horseshoe locking device incorrectly fitted (6.1.7 (j) (i)) | 1 |
| Steering operation linkage fouling when handlebars turned from lock to lock |2.1.4 |a|| | 1 |
| Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Nearside Front Direction indicator insecure |1.5.3b| | 1 |
| Front Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
| Rear Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
| Rear Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
| Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
| Front Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
| Brake lever is positioned so that the brake cannot be readily applied |3.1.3c| | 1 |
| Clutch lever positioned so it cannot be readily operated. |6.2.1g| | 1 |
| Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
| Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
| Throttle operating incorrectly |6.2.1f| | 1 |
| Indicator tell tale not functioning |1.5.2| | 1 |
| Nearside Front Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 1 |
| Nearside Rear Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
| Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
| Plate brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.B2b| | 1 |
| Riders seat insecure |6.2.1a| | 1 |
| Position lamp switch insecure |1.1.4b| | 1 |
| Nearside Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 1 |
| Indicator switch defective |1.5.4| | 1 |
| Centre Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
| Stop lamp does not illuminate immediately a brake applies Brake light doesn`t operate on either front or rear brake
|1.3.1a| | 1 |
| Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
| Nearside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Front Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
| Front Front wheel bearings are excessively rough |2.3.5b| | 1 |
| Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
| Rear Brake disc|s| excessively worn |3.2.A1l| | 1 |
| Rear mono-shock pivot excessively worn |2.4.B.4| | 1 |
| Drive chain sprocket carrier worn to excess |6.2.1e| | 1 |
| Rear reflector missing (4.8.2 (a) (ii)) | 1 |
| Headlamp aim beam image too far to the right |1.6.4| | 1 |
| Rear Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Front Stop lamp not working |4.3.1 |a| |ii|| | 1 |
| Front Brake excessively binding (1.2.1 (f)) | 1 |
| Rear Suspension attachment bracket/mounting insecure Swing arm nut loose (5.3.3 (a) (i)) | 1 |
| Exhaust system insecure (6.1.2 (a)) | 1 |
| Front Brake disc|s| insecure |3.2.A1g| | 1 |
| Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
| Front Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
| Nearside Front Brake disc|s| securing bolt|s| missing |3.2.A1g| | 1 |
| Offside Front Brake disc|s| securing bolt|s| missing |3.2.A1g| | 1 |
| Front Front position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
| Offside Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
| Nearside Front Direction indicator missing |1.5.1a| | 1 |
| Nearside Rear Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
| Steering control handlebar movement restricted by taut cables |2.1.2c| | 1 |
| Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
| Rear Brake disc significantly and obviously worn (1.1.14 (a) (i)) | 1 |
| Rear Brake hose leaking fluid |3.2.B4| | 1 |
| Front Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
| Front Headlamp dipped beam affected by the operation of the horn |1.2.2c| | 1 |
| Front Headlamp main beam affected by the operation of the horn |1.2.2c| | 1 |
| Front Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
| Rear Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
| Front Brake lever insecure |3.1.2a| | 1 |
| Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
| Rear Brake disc|s| excessively scored |3.2.A1l| | 1 |
| Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
| Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
| Stop lamp affected by the operation of the horn |1.3.2| | 1 |
| Rear Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
| Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
| Nearside Front Brake cylinder leaking hydraulic fluid |3.2.B1e| | 1 |