Most common failures | No# failures |
---|
Headlamp aim out of alignment | 15 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 6 |
Horn not working |1.7.3a| | 6 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 6 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 4 |
Rear Brake pedal has inadequate reserve travel |3.1.3b| | 4 |
Exhaust is leaking and excessively noisey |7.1.1b| | 3 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 3 |
Rear Footrest missing |6.2.1a| | 3 |
Rear reflector on motorcycle missing |1.4.1| | 3 |
Steering headbearing has excessive free play |2.2.2| | 3 |
Registration plate issues | 3 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 2 |
Rear Floor brake test indicates a sticking brake |3.3.C2c| | 2 |
Nearside Rear Footrest missing |6.2.1a| | 2 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 2 |
Centre Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
Direction indicators not working |1.5.1c| | 2 |
Offside Front Footrest insecure |6.2.1a| | 2 |
Headlamp insecure |1.2.3b| | 2 |
Offside Rear Footrest missing |6.2.1a| | 2 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 2 |
Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 2 |
Brake pedal has inadequate reserve travel |3.1.3b| | 2 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 2 |
Drive chain excessively tight |6.2.1d| | 2 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Nearside Front Direction indicators not working |1.5.1c| | 2 |
Front Headlamp insecure |1.2.3b| | 2 |
Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Fairings insecure and likely to impede the steering |2.1.2e| | 2 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Front Brake indicates excessive fluctuation of brake effort |1.2.1 |e|| | 1 |
Front Position lamp not working |4.2.1 |a|| | 1 |
Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Offside Handlebar deformed |2.1.1b| | 1 |
Offside Rear Direction indicator not working |1.5.1c| | 1 |
Rear reflector on motorcycle damaged and function impaired |1.4.2a| | 1 |
Rear Drive chain excessively loose |6.2.1d| | 1 |
Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
Drive chain worn to excess |6.2.1e| | 1 |
Drive chain sprocket carrier worn to excess |6.2.1e| | 1 |
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Nearside Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Nearside Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Rear mono-shock insecure |2.4.B.4| | 1 |
Rear Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Rear Brake pedal is inoperative |3.1.3c| | 1 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Rear Brake component is excessively corroded |3.1.5| | 1 |
Indicator switch insecure |1.5.4| | 1 |
Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
Horn control not functioning. |1.7.2b| | 1 |
Rear position lamp insecure |1.1.1c| | 1 |
Rear Drive chain sprocket worn to excess loose and not secure |6.2.1e| | 1 |
Steering headbearing has excessive free play yoke nut loose |2.2.2| | 1 |
Front Steering damper ineffective |2.1.2d| | 1 |
Centre Front Lower Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Centre Front Lower Headlamp aim not tested |1.6| | 1 |
Centre Front Lower Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
Centre Front Upper Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
Centre Rear Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Nearside Rear Drive chain excessively loose |6.2.1d| | 1 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 1 |
Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Offside Front Direction indicators not working |1.5.1c| | 1 |
Handlebar deformed |2.1.1b| | 1 |
Nearside Steering lock stop ineffective |2.1.3| | 1 |
Front Footrest insecure |6.2.1a| | 1 |
Rear Chain guard insecure |6.2.1c| | 1 |
Rear Brake linkage has abnormal movement due to excessive wear |3.2.A1i| | 1 |
Rear Brake locking device missing |3.2.A1e| | 1 |
Brake master cylinder fluid level dangerously low |3.2.B1d| | 1 |
Fuel system component leaking |7.2.1a| | 1 |
Front position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Front mudguard insecure |2.3.7| | 1 |
Front Direction indicator not working |1.5.1c| | 1 |
Rear Direction indicator not working |1.5.1c| | 1 |
Rear Brake locking device insecure |3.2.A1e| | 1 |
Nearside Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
Offside Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
Horn is not a constant note |1.7.3c| | 1 |
Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 1 |
Steering control handlebar movement restricted by taut cables |2.1.2c| | 1 |
Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Rear Roller brake test indicates a severely juddering brake |3.3.A1b| | 1 |
Offside Front Direction indicator not working |1.5.1c| | 1 |
Front suspension assembly component loose |2.3.1| | 1 |
Direction indicator missing |1.5.1a| | 1 |
Front Roller brake test indicates a severely juddering brake |3.3.A1b| | 1 |
Rear Brake linkage clevis joint excessively worn |3.2.A1d| | 1 |
Front shock absorber seal failed and leaking oil both |2.3.3| | 1 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Offside Brake back plate|s| securing bolt|s| loose |3.2.A1j| | 1 |
Footrest missing |6.2.1a| | 1 |
Centre Front Upper Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Offside Rear Lower Brake linkage has abnormal movement due to excessive wear |3.2.A1i| | 1 |
Nearside Front Lower Footrest insecure |6.2.1a| | 1 |
Offside Front Lower Footrest insecure |6.2.1a| | 1 |
Centre Rear Lower Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Front Steering control has Insufficient clearance at full lock affecting the riders operation of the controls |2.1.2b| | 1 |
Rear Brake reaction bracket insecure |3.2.A1j| | 1 |
Nearside Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Offside Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Front wheel spindle securing nut locking device missing |2.3.3a| | 1 |
Rear Drive chain sprocket carrier worn to excess |6.2.1e| | 1 |
Front Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
Front Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Rear Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |