| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 22 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 12 |
| Rear reflector on motorcycle missing |1.4.1| | 11 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 9 |
| Drive chain excessively loose |6.2.1d| | 8 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 8 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 8 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 7 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 6 |
| Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 5 |
| Front shock absorber seal failed and leaking oil |2.3.3| | 5 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 4 |
| Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
| Offside Rear Direction indicator not working |1.5.1c| | 4 |
| Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 4 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
| Drive chain worn to excess |6.2.1e| | 3 |
| Headlamp aim beam image kick up to the offside |1.6| | 3 |
| Offside Front Footrest insecure |6.2.1a| | 3 |
| Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 3 |
| Horn not working |1.7.3a| | 3 |
| Registration plate issues | 3 |
| Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
| Rear Brake pedal has inadequate reserve travel |3.1.3b| | 3 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 3 |
| Rear Rear reflector on motorcycle missing |1.4.1| | 3 |
| Offside Front Direction indicator not working |1.5.1c| | 2 |
| Rear Drive chain sprocket worn to excess |6.2.1e| | 2 |
| Rear Hydraulic brake control feels spongy |3.1.4a| | 2 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
| Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
| Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 2 |
| Front Stop lamp not working (4.3.1 (a) (ii)) | 2 |
| Drive chain excessively tight |6.2.1d| | 2 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
| Front Brake disc|s| has excessive run out |3.2.A1m| | 2 |
| Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
| Rear Drive chain worn to excess |6.2.1e| | 2 |
| Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
| Front Floor brake test indicates a binding brake |3.3.C2c| | 2 |
| Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 2 |
| Offside Front Direction indicator not working (4.4.1 (a) (ii)) | 2 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 2 |
| Horn not loud enough to be heard by another road user |1.7.3a| | 2 |
| Front Wheel has an excessively distorted bead rim. |4.2.2| | 2 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 2 |
| Offside Rear Footrest insecure |6.2.1a| | 2 |
| Front wheel bearings have excessive free play |2.3.5b| | 2 |
| Front suspension has inadequate damping effect. |2.3.6c| | 2 |
| Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 2 |
| Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 2 |
| Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
| Exhaust markings indicating not for road use or similar wording |7.1.4| | 1 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
| Offside Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
| Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Rear Footrest insecure |6.2.1a| | 1 |
| Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Throttle control functioning such that safe operation of the motorcycle is adversely affected (6.2.7 (a) (ii)) | 1 |
| Rear Position lamp not working (4.2.1 (a)) | 1 |
| Nearside Drive chain so loose it is likely to fail (6.1.7 (c) (ii)) | 1 |
| Fuel tank leaking |7.2.1a| | 1 |
| Nearside Front Direction indicator not working |1.5.1c| | 1 |
| Offside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
| Offside Handlebar deformed |2.1.1b| | 1 |
| Front Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
| Rear Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
| Front Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
| Rear Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
| Lower Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
| Offside Rear Direction indicators not working |1.5.1c| | 1 |
| Front Steering headbearing has excessive free play |2.2.2| | 1 |
| Rear Floor brake test indicates a binding brake |3.3.C2c| | 1 |
| Stop lamp not working rear brake (4.3.1 (a) (ii)) | 1 |
| Rear Brake excessively binding (1.2.1 (f)) | 1 |
| Nearside Rear Direction indicators not working |1.5.1c| | 1 |
| Steering headbearing in such a condition that steering control is adversely affected Bearings notchy when wheel lifted |2.2.2 |f| |ii|| | 1 |
| Central Front Outer Position lamp not working |4.2.1 |a|| | 1 |
| Offside Rear Brake pedal has insufficient reserve travel |1.1.2 |a|| | 1 |
| Offside Front Shock absorber has a serious fluid leak fork seal leaking |5.3.2 |b|| | 1 |
| Nearside Rear Drive chain excessively loose |6.1.7 |c| |i|| | 1 |
| Offside Front Outer Brake disc contaminated oil contaminated |1.1.14 |b|| | 1 |
| Offside Front Direction indicators not working |1.5.1c| | 1 |
| Front Position lamp not working (4.2.1 (a)) | 1 |
| Brake pedal has insufficient reserve travel (1.1.2 (a)) | 1 |
| Offside Rear Upper Direction indicator not working |1.5.1c| | 1 |
| Nearside Front Upper Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Handlebar deformed |2.1.1b| | 1 |
| Throttle operating incorrectly |6.2.1f| | 1 |
| Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Front Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Rear Brake linkage has abnormal movement due to excessive wear |3.2.A1i| | 1 |
| Direction indicators not working |1.5.1c| | 1 |
| Headlamp aim not tested |1.6| | 1 |
| Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
| Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
| Offside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 1 |
| Rear Drive chain excessively loose |6.2.1d| | 1 |
| Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
| Nearside Rear Direction indicator insecure |1.5.3b| | 1 |
| Offside Rear Direction indicator insecure |1.5.3b| | 1 |
| Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
| Direction indicators not working all |1.5.1c| | 1 |
| Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
| Headlamp aim not tested |4.1.2 |b|| | 1 |
| Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
| Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
| Rear Drive chain excessively loose (6.1.7 (c) (i)) | 1 |
| Rear Brake pedal has insufficient reserve travel (1.1.2 (a)) | 1 |
| Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
| Drive chain worn to excess (6.1.7 (c) (i)) | 1 |
| Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
| Nearside Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Offside Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
| Stop lamp remains on when the brakes are released | 1 |
| Front Hydraulic brake control feels spongy |3.1.4a| | 1 |
| Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
| Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Rear reflector missing (4.8.2 (a) (ii)) | 1 |
| Front Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
| Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
| Nearside Front Front suspension spring worn and seriously weakened |2.3.2b| | 1 |
| Offside Front Front suspension spring worn and seriously weakened |2.3.2b| | 1 |
| Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
| Fuel system component leaking |7.2.1a| | 1 |
| Nearside Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Horn not working (7.7 (a)) | 1 |
| Rear Direction indicators not working |1.5.1c| | 1 |
| Front Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
| Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 1 |
| Front Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
| Rear Rear reflector on motorcycle obscured |1.4.1| | 1 |
| Lower Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
| Upper Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
| Rear Brake disc|s| has excessive run out |3.2.A1m| | 1 |
| Nearside Front Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
| Lower Rear mono-shock pivot excessively worn |2.4.B.4| | 1 |
| Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |
| Rear Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |
| Wheel alignment incorrect which adversely affects the handling (2.4 (a)) | 1 |
| Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a)) | 1 |
| Rear Brake pedal has insufficient reserve travel |1.1.2 |a|| | 1 |
| Centre Front Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
| Centre Rear Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
| Offside Rear Brake cylinder leaking reservoir leaking (1.1.16 (b) (i)) | 1 |
| Nearside Rear Footrest insecure |6.2.1a| | 1 |
| Indicator tell tale not functioning |1.5.2| | 1 |
| Front Roller brake test indicates a severely juddering brake |3.3.A1b| | 1 |
| Hydraulic brake control creeps under load. |3.1.4a| | 1 |
| Front Brake indicates excessive fluctuation of brake effort |1.2.1 |e|| | 1 |
| Offside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
| Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
| Front Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
| Rear Brake pedal is so short and the brake cannot be readily applied |3.1.3c| | 1 |
| Offside Front Brake master cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
| Nearside Rear Direction indicator not working |1.5.1c| | 1 |
| Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
| Centre Front Headlamp insecure |1.2.3b| | 1 |
| Centre Front Indicator tell tale not functioning |1.5.2| | 1 |
| Registration plate lamp issues | 1 |
| Offside Rear Direction indicator not working |4.4.1 |a| |ii|| | 1 |
| Position lamp not working |4.2.1 |a|| | 1 |
| Front Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |