| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 33 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 32 |
| Registration plate issues | 14 |
| Rear reflector on motorcycle missing |1.4.1| | 14 |
| Drive chain excessively loose |6.2.1d| | 12 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 12 |
| Front Floor brake test indicates a binding brake |3.3.C2c| | 10 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 8 |
| Front wheel bearings have excessive free play |2.3.5b| | 8 |
| Horn not working |1.7.3a| | 7 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 7 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 6 |
| Front shock absorber seal failed and leaking oil |2.3.3| | 6 |
| Front Roller brake test indicates a sticking brake |3.3.A1a| | 5 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 5 |
| Front Brake excessively binding (1.2.1 (f)) | 5 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 5 |
| Headlamp aim beam image kick up to the offside |1.6| | 5 |
| Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 5 |
| Rear Brake pedal has inadequate reserve travel |3.1.3b| | 4 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 4 |
| Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 4 |
| Nearside Rear Direction indicator not working |1.5.1c| | 4 |
| Drive chain worn to excess |6.2.1e| | 4 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 4 |
| Exhaust markings indicating not for road use or similar wording |7.1.4| | 4 |
| Front Floor brake test indicates a sticking brake |3.3.C2c| | 4 |
| Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 4 |
| Brake pedal has inadequate reserve travel |3.1.3b| | 4 |
| Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 3 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 3 |
| Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 3 |
| Horn not loud enough to be heard by another road user |1.7.3a| | 3 |
| Front wheel bearings are excessively rough |2.3.5b| | 3 |
| Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 3 |
| Rear Drive chain sprocket worn to excess |6.2.1e| | 3 |
| Nearside Rear Direction indicators not working |1.5.1c| | 3 |
| Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
| Offside Front Footrest insecure |6.2.1a| | 3 |
| Rear Roller brake test indicates a sticking brake |3.3.A1a| | 3 |
| Rear suspension bush has excessive free play |2.4.A2a|i|| | 3 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 3 |
| Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 3 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 3 |
| Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 3 |
| Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 3 |
| Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 3 |
| Rear Brake disc|s| has excessive run out |3.2.A1m| | 2 |
| Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
| Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 2 |
| Throttle operating incorrectly (6.2.7 (a) (i)) | 2 |
| Rear Floor brake test indicates a sticking brake |3.3.C2c| | 2 |
| Drive chain excessively tight |6.2.1d| | 2 |
| Front Drive chain sprocket worn to excess |6.2.1e| | 2 |
| Offside Front Brake disc|s| has excessive run out |3.2.A1m| | 2 |
| Front suspension assembly has an insecure fork brace |2.3.4d| | 2 |
| Wheel alignment incorrect which adversely affects the handling |2.5.1| | 2 |
| Offside Handlebar deformed |2.1.1b| | 2 |
| Direction indicators flashing more than 120 times per minute |1.5.1c| | 2 |
| Centre Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
| Steering headbearing has excessive free play |2.2.2| | 2 |
| Rear Floor brake test indicates a binding brake |3.3.C2c| | 2 |
| Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 2 |
| Rear Hydraulic brake control feels spongy |3.1.4a| | 2 |
| Throttle operating incorrectly |6.2.1f| | 2 |
| Rear reflector missing (4.8.2 (a) (ii)) | 2 |
| Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 2 |
| Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
| Front Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 2 |
| Front Brake lever has inadequate reserve travel |3.1.3b| | 2 |
| Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
| Offside Front Handlebar fouling on the fuel tank or bodywork on full lock (2.1.4 (b)) | 1 |
| Nearside Front Handlebar retaining device loose (2.2.1 (b) (i)) | 1 |
| Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |
| Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
| Nearside Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
| Centre Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Centre Rear Brake master cylinder severely corroded |3.2.B1b| | 1 |
| Front Stop lamp does not emit a steady light |1.3.1b| | 1 |
| Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 1 |
| Rear Stop lamp does not emit a steady light |1.3.1b| | 1 |
| Handlebar deformed |2.1.1b| | 1 |
| Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Offside Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
| Rear reflector on motorcycle does not reflect squarely to the rear |1.4.1| | 1 |
| Offside Front Brake disc|s| excessively pitted |3.2.A1l| | 1 |
| Rear Brake component is excessively corroded |3.1.5| | 1 |
| Front Brake cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
| Front Brake disc|s| cracked |3.2.A1g| | 1 |
| Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
| Fuel cap sealing washer missing |7.2.2c| | 1 |
| Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Centre Rear Drive chain excessively loose |6.2.1d| | 1 |
| Rear Rear position lamp insecure |1.1.1c| | 1 |
| Front Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
| Front Riders seat insecure |6.2.1a| | 1 |
| Offside Front Front suspension assembly component loose |2.3.1| | 1 |
| Rear Rear suspension movement is excessively stiff |2.4.A.3b| | 1 |
| Front Stop lamp not working |4.3.1 |a| |ii|| | 1 |
| Offside Front Direction indicator not working |1.5.1c| | 1 |
| Offside Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
| Nearside Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |
| Rear Brake cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
| Rear Hydraulic brake control creeps under load. |3.1.4a| | 1 |
| Offside Steering control has Insufficient clearance at full lock affecting the riders operation of the controls |2.1.2b| | 1 |
| Front Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
| Front Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
| Centre Lower Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
| Front Steering headbearing has excessive free play |2.2.2| | 1 |
| Front Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
| Front Headlamp main beam affected by the operation of another lamp |1.2.2c| | 1 |
| Nearside Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Riders seat insecure |6.2.1a| | 1 |
| Offside Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Offside Front Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
| Front Horn not working |1.7.3a| | 1 |
| Centre Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Offside Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
| Nearside Rear Drive chain excessively tight |6.2.1d| | 1 |
| Rear Brake hose leaking fluid |3.2.B4| | 1 |
| Headlamp not working on main beam |4.1.1 |a| |ii|| | 1 |
| Lower Rear mono-shock pivot excessively worn |2.4.B.4| | 1 |
| Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
| Rear Brake pedal is inoperative |3.1.3c| | 1 |
| Offside Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 1 |
| Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 1 |
| Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
| Headlamp aim beam image kick-up is to the offside |1.6.1| | 1 |
| Central Rear Lower Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
| Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
| Central Rear Lower Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Rear Brake locking device insecure |3.2.A1e| | 1 |
| Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
| Offside Front Brake lever cannot be applied smoothly |3.1.3d| | 1 |
| Rear Brake pipe likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
| Offside Front Motorcycle structure adversely modified |6.1.1b| | 1 |
| Centre Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Nearside Front Direction indicator not working |1.5.1c| | 1 |
| Front Steering linkage has excessive free play |2.2.2| | 1 |
| Horn not working (7.7 (a) (ii)) | 1 |
| Brake performance not tested Due to front caliper lose (1.2.1 (g)) | 1 |
| Nearside Front Brake caliper insecure (1.1.16 (c) (i)) | 1 |
| Nearside Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
| Offside Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
| Nearside Handlebar so insecure it is likely to become detached (2.2.1 (b) (ii)) | 1 |
| Nearside Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
| Offside Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
| Offside Front suspension assembly component loose |2.3.1| | 1 |
| Offside Front suspension assembly component missing |2.3.1| | 1 |
| Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Stop lamp does not illuminate immediately a brake applies front brake control does not operate brake light |1.3.1a| | 1 |
| Nearside Rear Drive chain excessively loose |6.2.1d| | 1 |
| Offside Front Brake disc|s| cracked |3.2.A1g| | 1 |
| Throttle operating incorrectly |6.2.7 |a| |i|| | 1 |
| Nearside Front Brake cylinder severely corroded |3.2.B1b| | 1 |
| Offside Brake cylinder severely corroded |3.2.B1b| | 1 |
| Brake pipe excessively corroded | 1 |
| Front Brake disc|s| is excessively distorted |3.2.A1m| | 1 |
| Front Headlamp deteriorated and function impaired |1.2.3a| | 1 |
| Rear suspension component loose |2.4.A.1a| | 1 |
| Brake excessively binding Front Brake Binding excessively (1.2.1 (f)) | 1 |
| Brake hose damaged and likely to fail Rear Flexible Brake hose at caliper defective (1.1.12 (a)) | 1 |
| Rear Drive chain sprocket carrier worn to excess |6.2.1e| | 1 |
| Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
| Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition |8.1.1 |a|| | 1 |
| Offside Handlebar so insecure it is likely to become detached |2.2.1 |b| |ii|| | 1 |
| Brake performance not tested front brakes binding excessively (1.2.1 (g)) | 1 |
| Fuel system component leaking excessively or a risk of fire (6.1.3 (b) (ii)) | 1 |
| Brake performance not tested front brakes seized on (1.2.1 (g)) | 1 |
| Offside Front Wheel more than one fixing loose front axle pinch bolts not fully tightened (5.2.1 (a) (ii)) | 1 |
| Front Wheel excessively distorted (5.2.2 (c) (i)) | 1 |
| Front Wheel excessively damaged (5.2.2 (c) (i)) | 1 |
| Drive chain sprocket carrier worn to excess |6.2.1e| | 1 |
| Central Rear Stop lamp does not illuminate by the operation of both brake controls lights not working with both controls. (4.3.2 (a) (iii)) | 1 |
| Offside Front Lower Horn not working The horn not working at the start of the test i moved the wires slightly and stared to work. (7.7 (a)) | 1 |
| Registration plate lamp issues | 1 |
| Offside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
| Front suspension assembly component loose |2.3.1| | 1 |
| Nearside Rear Footrest insecure |6.2.1a| | 1 |
| Rear Direction indicators not working |1.5.1c| | 1 |
| Offside Rear Direction indicator not working |1.5.1c| | 1 |
| Stop lamp does not emit a steady light |1.3.1b| | 1 |
| Front Handlebar deformed |2.1.1b| | 1 |
| Front Fuel cap does not fasten securely maintaining the sealing arrangement |7.2.2b| | 1 |
| Rear Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
| Rear Exhaust markings indicating not for road use or similar wording |7.1.4| | 1 |
| Offside Front Footrest missing |6.2.1a| | 1 |
| Offside Rear Braking system does not have an approriate system/s fitted according to its age |3.1.1| | 1 |
| Nearside Rear Footrest missing |6.2.1a| | 1 |
| Centre Front Lower Brake cylinder severely corroded |3.2.B1b| | 1 |
| Rear reflector on motorcycle damaged and function impaired |1.4.2a| | 1 |
| Rear Drive chain excessively loose |6.2.1d| | 1 |
| Rear Drive chain worn to excess |6.2.1e| | 1 |
| Front Steering lock stop ineffective |2.1.3| | 1 |
| Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
| Nearside Front Brake disc contaminated (1.1.14 (b)) | 1 |
| Offside Front Brake disc contaminated (1.1.14 (b)) | 1 |
| Headlamp aim so that beam "kick up" is not visible on the screen |4.1.2 |a|| | 1 |
| Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
| Horn sounds harsh or grating |1.7.3c| | 1 |
| Nearside Front Footrest insecure |6.2.1a| | 1 |
| Front Fairing so located that it is likely to impede the steering |2.1.2e| | 1 |
| Nearside Front Direction indicators not working |1.5.1c| | 1 |
| Nearside Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Centre Front Steering headbearing has excessive free play |2.2.2| | 1 |
| Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
| Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
| Nearside Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Offside Front Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
| Offside Rear Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
| Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
| Stop lamp not working |4.3.1 |a| |ii|| | 1 |
| Handlebar so insecure it is likely to become detached |2.2.1 |b| |ii|| | 1 |
| Fuel system component insecure |7.2.1b| | 1 |
| Front Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
| Front wheel spindle securing nut locking device missing |2.3.3a| | 1 |
| Front Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Fuel system component leaking |7.2.1a| | 1 |
| Offside Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Offside Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
| Throttle operating incorrectly not returning correctly |6.2.1f| | 1 |
| Steering control handlebar movement restricted by taut cables |2.1.2c| | 1 |