Most common failures | No# failures |
---|
Headlamp aim out of alignment | 8 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 6 |
Registration plate issues | 5 |
Rear Hydraulic brake control feels spongy |3.1.4a| | 4 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 4 |
Drive chain excessively loose |6.2.1d| | 4 |
Rear reflector on motorcycle missing |1.4.1| | 3 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 3 |
Horn not working |1.7.3a| | 3 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 3 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
Brake pedal has inadequate reserve travel |3.1.3b| | 2 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Headlamp aim beam image kick-up is to the offside |1.6.1| | 2 |
Rear Brake disc|s| excessively worn |3.2.A1l| | 2 |
Steering headbearing has excessive free play |2.2.2| | 2 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
Front wheel bearings have excessive free play |2.3.5b| | 2 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Nearside Front Footrest insecure |6.2.1a| | 2 |
Drive chain excessively tight |6.2.1d| | 2 |
Front Roller brake test indicates a sticking brake |3.3.A1a| | 2 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 2 |
Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Offside Front Lower Brake hose excessively kinked |3.2.B3a| | 1 |
Centre Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Centre Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Stop lamp emits other than a steady red light |1.3.1b| | 1 |
Rear Stop lamp does not emit a steady light |1.3.1b| | 1 |
Rear Drive chain excessively loose |6.2.1d| | 1 |
Nearside Rear Direction indicators not working |1.5.1c| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Rear Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Front Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Lower Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
Offside Front Brake component modification unsafe (1.1.21 (d) (i)) | 1 |
Rear Suspension component pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
Headlamp aim so that beam "kick up" is not visible on the screen (4.1.2 (a)) | 1 |
Horn not working |7.7 |a| |ii|| | 1 |
Nearside Front Direction indicator insecure |1.5.3b| | 1 |
Nearside Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Front Position lamp not working side light not working. (4.2.1 (a)) | 1 |
Stop lamp not working when foot brake applied rear brake light not working. (4.3.1 (a) (ii)) | 1 |
Front Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 1 |
Headlamp aim beam image kick up to the offside |1.6| | 1 |
Brake lever cannot be applied smoothly |3.1.3d| | 1 |
Offside Rear Footrest missing |6.2.1a| | 1 |
Rear Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Front Drive chain sprocket worn to excess |6.2.1e| | 1 |
Nearside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Front Front wheel bearings are excessively rough |2.3.5b| | 1 |
Nearside Rear Footrest missing |6.2.1a| | 1 |
Offside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Rear Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
Rear Footrest missing |6.2.1a| | 1 |
Front Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
Nearside Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Offside Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Front Horn not working |1.7.3a| | 1 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Rear Brake pedal has insufficient reserve travel |1.1.2 |a|| | 1 |
Front Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Rear Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Rear Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Nearside Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride gear selector locking bolt missing |6.2.1h| | 1 |
Rear wheel spindle loose |2.4.A.2b| | 1 |
Front wheel spindle loose |2.3.3a| | 1 |
Nearside Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride drive chain sprocket not secure |6.2.1h| | 1 |
Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Front Brake performance not tested |3.3| | 1 |
Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Front Direction indicator not working |1.5.1c| | 1 |
Headlamp incorrect colour |1.2.1| | 1 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Rear Stop lamp damaged and function impaired |1.3.3a| | 1 |
Throttle operating incorrectly |6.2.1f| | 1 |
Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Rear Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Offside Rear Direction indicator not working |1.5.1c| | 1 |
Nearside Rear Direction indicator not working |1.5.1c| | 1 |
Front Headlamp aim not tested |1.6| | 1 |