Most common failures | No# failures |
---|
Headlamp aim out of alignment | 6 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 5 |
Drive chain worn to excess |6.2.1e| | 4 |
Drive chain excessively loose |6.2.1d| | 4 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 4 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 3 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 3 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 3 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 3 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Front Drive chain sprocket worn to excess |6.2.1e| | 2 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 2 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
Stop lamp remains on when the brake is released |1.3.1e| | 2 |
Headlamp aim not tested |4.1.2 |b|| | 1 |
Front Position lamp not working (4.2.1 (a)) | 1 |
Front Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
Front Brake excessively binding (1.2.1 (f)) | 1 |
Front Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Nearside Footrest insecure |6.2.1a| | 1 |
Nearside Front Position lamp switch faulty |1.1.4a| | 1 |
Nearside Rear Drive chain excessively loose |6.2.1d| | 1 |
Front suspension assembly component excessively misaligned steering out of line |2.3.1| | 1 |
Stop lamp does not emit a steady light intermittent |1.3.1b| | 1 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Front Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
Front Front mudguard insecure |2.3.7| | 1 |
Rear Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Drive chain sprocket worn to excess |6.2.1e| | 1 |
Rear position lamp insecure |1.1.1c| | 1 |
Rear Brake pedal is positioned so that the brake cannot be readily applied |3.1.3c| | 1 |
Nearside Front Footrest insecure |6.2.1a| | 1 |
Front Plate brake test indicates a binding brake |3.3.B1a| | 1 |
Throttle operating incorrectly |6.2.7 |a| |i|| | 1 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Offside Footrest insecure |6.2.1a| | 1 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Rear Drive chain worn to excess |6.2.1e| | 1 |
Front Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
Front Handlebar deformed |2.1.1b| | 1 |
Front mudguard insecure |2.3.7| | 1 |
Rear Wheel spoke missing (5.2.2 (d)) | 1 |
Rear Suspension arm pin or bush excessively worn movement side to side at rear wheel (5.3.4 (a) (i)) | 1 |
Front Brake master cylinder leaking front master cylinder has cracked sight glass and leaking |1.1.10 |b| |ii|| | 1 |
Steering headbearing in such a condition that steering control is adversely affected headrace bearings knotchy in centre front wheel raised |2.2.2 |f| |ii|| | 1 |
Registration plate issues | 1 |
Front Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Centre Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Rear Brake cable excessively corroded (1.1.15 (b)) | 1 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride torque arm bolt |6.2.1h| | 1 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Rear Stop lamp damaged and function impaired |1.3.3a| | 1 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Stop lamp remains on when the brakes are released | 1 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Rear Position lamp not working |4.2.1 |a|| | 1 |
Stop lamp does not illuminate immediately a brake applies FOOT CONTROL |1.3.1a| | 1 |
Offside Stop lamp not working foot control (4.3.1 (a) (ii)) | 1 |
Headlamp aim not tested |1.6| | 1 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Front Brake excessively binding |1.2.1 |f|| | 1 |
Drive chain excessively tight |6.2.1d| | 1 |
Offside Rear Lower Brake locking device missing |3.2.A1e| | 1 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Front Brake disc contaminated |1.1.14 |b|| | 1 |
Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Rear Position lamp not working (4.2.1 (a)) | 1 |
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Rear Brake lever has restricted free movement (1.1.15 (e)) | 1 |
Rear Brake has no recorded effort at a wheel (1.2.1 (a) (ii)) | 1 |
Rear Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Drive chain sprocket carrier worn to excess |6.2.1e| | 1 |
Nearside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Front Shock absorber has negligible damping effect |5.3.2 |b|| | 1 |
Rear Brake reaction bracket insecure |3.2.A1j| | 1 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |