| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 83 |
| Drive chain excessively loose |6.2.1d| | 64 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 38 |
| Drive chain worn to excess |6.2.1e| | 31 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 24 |
| Rear Drive chain sprocket worn to excess |6.2.1e| | 24 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 20 |
| Rear Stop lamp remains on when the brake is released |1.3.1e| | 17 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 15 |
| Rear reflector on motorcycle missing |1.4.1| | 15 |
| Steering headbearing has excessive free play |2.2.2| | 15 |
| Stop lamp remains on when the brake is released |1.3.1e| | 13 |
| Drive chain excessively tight |6.2.1d| | 12 |
| Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 12 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 11 |
| Drive chain sprocket carrier worn to excess |6.2.1e| | 11 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 10 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 10 |
| Rear Roller brake test indicates a sticking brake |3.3.A1a| | 10 |
| Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 10 |
| Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 10 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 9 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 9 |
| Horn not working |1.7.3a| | 9 |
| Front shock absorber seal failed and leaking oil |2.3.3| | 8 |
| Front wheel bearings have excessive free play |2.3.5b| | 8 |
| Front wheel bearings are excessively rough |2.3.5b| | 8 |
| Throttle operating incorrectly |6.2.1f| | 8 |
| Nearside Rear Direction indicators not working |1.5.1c| | 8 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 8 |
| Registration plate issues | 8 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 7 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 7 |
| Stop lamp remains on when the brakes are released | 7 |
| Front Drive chain sprocket worn to excess |6.2.1e| | 7 |
| Nearside Rear Direction indicator not working |1.5.1c| | 7 |
| Front Brake excessively binding (1.2.1 (f)) | 7 |
| Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 7 |
| Rear Stop lamp not working (4.3.1 (a) (ii)) | 6 |
| Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 6 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 5 |
| Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 5 |
| Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 5 |
| Drive chain excessively loose (6.1.7 (c) (i)) | 5 |
| Front Stop lamp not working (4.3.1 (a) (ii)) | 5 |
| Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 5 |
| Wheel alignment incorrect which adversely affects the handling |2.5.1| | 5 |
| Rear Brake pedal has inadequate reserve travel |3.1.3b| | 4 |
| Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 4 |
| Rear Floor brake test indicates a sticking brake |3.3.C2c| | 4 |
| Front Front wheel bearings are excessively rough |2.3.5b| | 4 |
| Brake pedal has inadequate reserve travel |3.1.3b| | 4 |
| Offside Rear Direction indicator not working |1.5.1c| | 4 |
| Drive chain so loose it is likely to fail (6.1.7 (c) (ii)) | 4 |
| Front Roller brake test indicates a sticking brake |3.3.A1a| | 4 |
| Front Brake lever has inadequate reserve travel |3.1.3b| | 4 |
| Handlebar deformed |2.1.1b| | 4 |
| Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 4 |
| Front Stop lamp remains on when the brake is released |1.3.1e| | 4 |
| Front Front wheel bearings have excessive free play |2.3.5b| | 4 |
| Front Brake disc contaminated (1.1.14 (b)) | 4 |
| Rear Drive chain sprocket carrier worn to excess |6.2.1e| | 4 |
| Front Position lamp not working (4.2.1 (a)) | 4 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 4 |
| Rear reflector missing (4.8.2 (a) (ii)) | 4 |
| Front Floor brake test indicates a binding brake |3.3.C2c| | 4 |
| Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 4 |
| Rear Drive chain excessively loose |6.2.1d| | 4 |
| An item not tested |Manual| | 4 |
| Rear Drive chain worn to excess |6.2.1e| | 4 |
| Steering movement excessively stiff with the wheel raised |2.2.1b| | 4 |
| Front Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
| Drive chain worn to excess |6.1.7 |c| |i|| | 3 |
| Nearside Rear Direction indicator insecure |1.5.3b| | 3 |
| Rear Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 3 |
| Rear Roller brake test indicates a severely grabbing brake |3.3.A1b| | 3 |
| Nearside Rear Drive chain excessively loose |6.2.1d| | 3 |
| Nearside Rear Drive chain sprocket worn to excess |6.2.1e| | 3 |
| Rear Brake pedal is positioned so that the brake cannot be readily applied |3.1.3c| | 3 |
| Front Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 3 |
| Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 3 |
| Rear Brake excessively binding (1.2.1 (f)) | 3 |
| Rear Brake effort inadequate at a wheel (1.2.1 (a) (i)) | 3 |
| Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 3 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 3 |
| Registration plate lamp issues | 3 |
| Drive chain excessively loose |6.1.7 |c| |i|| | 3 |
| Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
| Indicator tell tale not functioning |1.5.2| | 3 |
| Offside Rear Direction indicator not working (4.4.1 (a) (ii)) | 3 |
| Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 3 |
| Headlamp aim beam image kick up to the offside |1.6| | 3 |
| Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 3 |
| Front Wheel has an excessively distorted bead rim. |4.2.2| | 3 |
| Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 3 |
| Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 3 |
| Rear Brake linkage has abnormal movement due to maladjustment |3.2.A1i| | 3 |
| Headlamp insecure |1.2.3b| | 2 |
| Offside Rear Footrest missing |6.2.1a| | 2 |
| Front Roller brake test indicates a severely grabbing brake |3.3.A1b| | 2 |
| Rear Floor brake test indicates a binding brake |3.3.C2c| | 2 |
| Direction indicator missing |1.5.1a| | 2 |
| Brake pedal cannot be released smoothly |3.1.3d| | 2 |
| Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 2 |
| Nearside Rear Drive chain worn to excess |6.2.1e| | 2 |
| Rear position lamp incorrect colour |1.1.2b| | 2 |
| Rear Brake locking device missing |3.2.A1e| | 2 |
| Offside Rear Direction indicators not working |1.5.1c| | 2 |
| Drive chain excessively tight (6.1.7 (k) (i)) | 2 |
| Wheel alignment incorrect which adversely affects the handling (2.4 (a)) | 2 |
| Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 2 |
| Wheel alignment incorrect which adversely affects the steering |2.5.1| | 2 |
| Stop lamp not working (4.3.1 (a) (ii)) | 2 |
| Front Wheel bearing has excessive play |5.1.3 |a| |i|| | 2 |
| Headlamp aim headlamp damaged and function impaired |1.2.3a| | 2 |
| Rear Brake has no recorded effort at a wheel (1.2.1 (a) (ii)) | 2 |
| Rear Brake lining|s| less than 1.5 mm thick |3.2.A1f|i|| | 2 |
| Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 2 |
| Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 2 |
| Drive chain horseshoe locking device incorrectly fitted (6.1.7 (j) (i)) | 2 |
| Rear Brake component is excessively corroded |3.1.5| | 2 |
| Brake pedal has insufficient reserve travel |1.1.2 |a|| | 2 |
| Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 2 |
| Headlamp aim projected beam image obviously incorrect (4.1.2 (c)) | 2 |
| Chain guard insecure |6.2.1c| | 2 |
| Headlamp aim not tested (4.1.2 (b)) | 2 |
| Rear Stop lamp not working |4.3.1 |a| |ii|| | 2 |
| Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 2 |
| Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
| Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 2 |
| Rear Position lamp not working (4.2.1 (a)) | 2 |
| Rear Brake reaction bracket insecure |3.2.A1j| | 2 |
| Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 2 |
| Offside Front Direction indicator not working (4.4.1 (a) (ii)) | 2 |
| Nearside Rear Direction indicator not working |4.4.1 |a| |ii|| | 2 |
| Rear Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 2 |
| Drive chain so loose it is likely to fail |6.1.7 |c| |ii|| | 2 |
| Nearside Front Direction indicator not working |1.5.1c| | 2 |
| Centre Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
| Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 2 |
| Front Hydraulic brake control feels spongy |3.1.4a| | 2 |
| Front Brake lever has insufficient reserve travel (1.1.2 (a)) | 2 |
| Roller brake test brake efficiency less than 27.5% overall (1.2.2 (a) (ii)) | 2 |
| Headlamp aim not tested |1.6| | 2 |
| Offside Front Footrest insecure |6.2.1a| | 2 |
| Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 2 |
| Rear Brake pedal has insufficient reserve travel |1.1.2 |a|| | 2 |
| Rear Plate brake test indicates a binding brake |3.3.B1a| | 2 |