Most common failures | No# failures |
---|
Headlamp aim out of alignment | 5 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 3 |
Front wheel bearings are excessively rough |2.3.5b| | 3 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 2 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Drive chain sprocket carrier worn to excess |6.2.1e| | 2 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Drive chain excessively loose |6.2.1d| | 2 |
Rear Brake cable excessively corroded |3.2.A1b| | 2 |
Registration plate issues | 2 |
Drive chain sprocket worn to excess |6.2.1e| | 2 |
Nearside Direction indicators not working |1.5.1c| | 1 |
Front All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Throttle operating incorrectly |6.2.7 |a| |i|| | 1 |
Rear Wheel spoke missing |4.2.1b| | 1 |
Front Brake master cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
Drive chain worn to excess |6.2.1e| | 1 |
Centre Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Chain guard insecure |6.2.1c| | 1 |
Nearside Front Direction indicators not working |1.5.1c| | 1 |
Nearside Rear Direction indicator damaged and function impaired |1.5.3a| | 1 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Rear wheel rotation likely to be impeded |6.2.1b| | 1 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Rear position lamp deteriorated and function impaired |1.1.1b| | 1 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Stop lamp remains on when the brakes are released | 1 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Drive chain excessively loose |6.1.7 |c| |i|| | 1 |
Horn not working |1.7.3a| | 1 |
Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
Rear Direction indicators not working |1.5.1c| | 1 |
Rear Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Rear Brake pedal insecure |3.1.2a| | 1 |
Brake component insecure Rear brake arm bolt lose. (1.1.21 (c)) | 1 |
Front Brake excessively binding (1.2.1 (f)) | 1 |
Rear Brake excessively binding (1.2.1 (f)) | 1 |
Drive chain excessively tight |6.2.1d| | 1 |
Rear Drive chain sprocket carrier worn to excess |6.2.1e| | 1 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Handlebar deformed |2.1.1b| | 1 |
Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Front Front mudguard insecure |2.3.7| | 1 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Rear Wheel spoke excessively loose |4.2.1b| | 1 |
Front wheel bearings have excessive free play |2.3.5b| | 1 |
Horn is not a constant note |1.7.3c| | 1 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Throttle operating incorrectly |6.2.1f| | 1 |
Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |