Most common failures | No# failures |
---|
Headlamp aim out of alignment | 10 |
Direction indicators not working |1.5.1c| | 2 |
Steering headbearing has excessive free play |2.2.2| | 2 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 2 |
Headlamp aim beam image kick up to the offside |1.6| | 2 |
Offside Front Footrest insecure |6.2.1a| | 2 |
Front wheel spindle securing nut locking device missing |2.3.5a| | 1 |
Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Fuel system component leaking |7.2.1a| | 1 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Horn not working |1.7.3a| | 1 |
Rear Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
Fuel tank leaking |7.2.1a| | 1 |
Rear Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Front Horn not working |1.7.3a| | 1 |
Drive chain excessively loose |6.2.1d| | 1 |
Rear Wheel spoke excessively loose |4.2.1b| | 1 |
Nearside Fuel pipe leaking |7.2.1a| | 1 |
Rear reflector on motorcycle missing |1.4.1| | 1 |
Nearside Front Direction indicators not working |1.5.1c| | 1 |
Offside Rear Brake component has restricted free movement and operation is likely to be impeded brake arm movement restricted by mal-adjustment of arm on splines. |3.2.A1h| | 1 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Centre Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Centre Rear Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
Nearside Rear Drive chain horseshoe locking device likely to become detached |6.1.7 |j| |ii|| | 1 |
Front Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
Front Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Rear shock absorber insecurely mounted |2.4.A.3b| | 1 |
Front Steering headbearing has excessive free play |2.2.2| | 1 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Front wheel bearings have excessive free play |2.3.5b| | 1 |
Offside Front Upper Front suspension assembly component loose |2.3.1| | 1 |
Nearside Rear Direction indicator insecure |1.5.3b| | 1 |
Offside Rear Direction indicator insecure |1.5.3b| | 1 |
Front Brake pipe union leaking fluid |3.2.B4| | 1 |
Nearside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Front Upper Brake pipe union leaking fluid |3.2.B4| | 1 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Nearside Lower Front suspension assembly component loose |2.3.1| | 1 |
Horn is not continous or uniform |1.7.3c| | 1 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
Stop lamp does not illuminate immediately a brake applies front brake does not illuminate stop lamp |1.3.1a| | 1 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Registration plate issues | 1 |
Brake pedal has insufficient reserve travel brake pedal fouls silencer (1.1.2 (a)) | 1 |
Rear Position lamp not working (4.2.1 (a)) | 1 |
Offside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Nearside Front Footrest insecure |6.2.1a| | 1 |
Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Front wheel spindle securing nut|s| loose |2.3.5a| | 1 |
Rear Brake reaction bracket securing bolt|s| missing lever pivot cotter pin |3.2.A1j| | 1 |
Front Brake reaction bracket insecure locking tabs |3.2.A1j| | 1 |
Nearside Front Brake reaction bracket securing bolt|s| missing cotter pin pivot |3.2.A1j| | 1 |
Offside Front Brake reaction bracket securing bolt|s| missing pivot missing |3.2.A1j| | 1 |
Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride adjuster loose |6.2.1h| | 1 |
Rear Front wheel spindle securing nut locking device missing |2.3.5a| | 1 |
Steering control handlebar movement restricted by trapped cables |2.1.2c| | 1 |
Fuel system component leaking carbs 2 and 3 leaking - appears to be coming from float bowl seals |7.2.1a| | 1 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |