Most common failures | No# failures |
---|
Headlamp aim out of alignment | 11 |
Horn not working |1.7.3a| | 5 |
Brake hose excessively deteriorated | 3 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 3 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 2 |
Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Headlamp insecure |1.2.3b| | 2 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
Registration plate issues | 2 |
Front wheel spindle securing nut locking device missing |2.3.5a| | 2 |
Nearside Rear Direction indicator insecure |1.5.3b| | 2 |
Drive chain excessively loose |6.2.1d| | 2 |
Headlamp aim beam image kick up to the offside |1.6| | 2 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Front Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
Nearside Front Footrest insecure |6.2.1a| | 1 |
Drive chain worn to excess |6.2.1e| | 1 |
Fuel cap does not fasten securely maintaining the sealing arrangement |7.2.2b| | 1 |
Fuel cap does not fasten securely by a positive means |7.2.2b| | 1 |
Steering headbearing has excessive free play |2.2.2| | 1 |
Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Horn control defective |1.7.2a| | 1 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Front Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Drive chain sprocket carrier worn to excess |6.2.1e| | 1 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride joining link clip damaged |6.2.1h| | 1 |
Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Rear Brake locking device missing split pin |3.2.A1e| | 1 |
Front wheel bearings have excessive free play |2.3.5b| | 1 |
Fuel system component leaking |7.2.1a| | 1 |
Brake locking device missing |3.2.A1e| | 1 |
Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 1 |
Rear Brake reaction bracket insecure |3.2.A1j| | 1 |
Brake disc|s| insecure |3.2.A1g| | 1 |
Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Rear Brake locking device missing |3.2.A1e| | 1 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
Stop lamp does not illuminate immediately a brake applies Front brake |1.3.1a| | 1 |
Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Front Front suspension fouling which affects the movement of the front suspension. |2.3.6a| | 1 |
Front Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Rear Rear suspension bush has excessive free play front bushes |2.4.A2a|i|| | 1 |
Front Locking devices not correctly fitted which may make the motor bicycle dangerous to ride engine bolts |6.2.1h| | 1 |
Rear wheel spindle securing nut|s| loose |2.4.A.2b| | 1 |
Fuel pipe leaking |7.2.1a| | 1 |
Front Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Rear Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Front Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Suspension component pin or bush excessively worn |5.3.4 |a| |i|| | 1 |
Fuel cap sealing washer deteriorated |7.2.2c| | 1 |
Brake reaction bracket insecure |3.2.A1j| | 1 |
Brake cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
Riders seat insecure |6.2.1a| | 1 |
Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 1 |
Nearside Lower Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Fuel cap mounting flange/sealing method defective |7.2.2c| | 1 |