Most common failures | No# failures |
---|
Headlamp aim out of alignment | 11 |
Horn not working |1.7.3a| | 4 |
Nearside Rear Direction indicators not working |1.5.1c| | 3 |
Drive chain excessively loose |6.2.1d| | 3 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 3 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 2 |
Steering headbearing has excessive free play |2.2.2| | 2 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 2 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 2 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
Registration plate issues | 2 |
Drive chain excessively tight |6.2.1d| | 2 |
Front wheel spindle securing nut locking device missing |2.3.3a| | 2 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 2 |
Offside Rear Direction indicator not working |1.5.1c| | 1 |
Nearside Front Direction indicators not working |1.5.1c| | 1 |
Riders seat insecure |6.2.1a| | 1 |
Upper Fuel system component insecure |7.2.1b| | 1 |
Front position lamp damaged and function impaired |1.1.1b| | 1 |
Offside Rear Lower Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |
Front Brake disc|s| securing bolt|s| loose |3.2.A1g| | 1 |
Rear position lamp deteriorated and function impaired |1.1.1b| | 1 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Nearside Rear Footrest insecure |6.2.1a| | 1 |
Rear Floor brake test indicates a severely juddering brake |3.3C2d.| | 1 |
Horn not working (7.7 (a) (ii)) | 1 |
Drive chain so worn it is likely to fail (6.1.7 (c) (ii)) | 1 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Upper Steering movement excessively rough with the wheel raised |2.2.1b| | 1 |
Lower Steering movement excessively rough with the weight on the lower bearing |2.2.1a| | 1 |
Offside Rear Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
Rear All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Nearside Handlebar grip insecure to handlebar |2.2.1 |d| |ii|| | 1 |
Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
Front wheel spindle securing nut locking device missing |2.3.5a| | 1 |
Rear Brake reaction bracket securing bolt|s| missing |3.2.A1j| | 1 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Front Brake hose leaking fluid |3.2.B4| | 1 |
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Rear shock absorber insecurely mounted |2.4.A.3b| | 1 |
Front mudguard can easily contact the wheel |2.3.7| | 1 |
Offside Front Direction indicators not working |1.5.1c| | 1 |
Rear Wheel spoke excessively loose |4.2.1b| | 1 |
Fuel cap sealing washer torn |7.2.2c| | 1 |
Front Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
Front Direction indicators not working |1.5.1c| | 1 |
Central Front Upper Steering headbearing has excessive wear or free play |2.2.2 |f| |i|| | 1 |
Nearside Rear Footrest insecure |6.2.12 |a|| | 1 |
Offside Rear Footrest insecure |6.2.12 |a|| | 1 |
Fuel hose leaking |7.2.1a| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Nearside Footrest insecure |6.2.1a| | 1 |
Nearside Fuel system component leaking |7.2.1a| | 1 |
Nearside Lower Rear shock absorber insecurely mounted |2.4.A.3b| | 1 |
Offside Lower Rear shock absorber insecurely mounted |2.4.A.3b| | 1 |
Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Nearside Outer Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Drive chain worn to excess |6.2.1e| | 1 |
Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Offside Steering lock stop ineffective |2.1.3| | 1 |
Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
Offside Front Direction indicator not working |4.4.1 |a| |ii|| | 1 |
Rear Stop lamp switch with a delay in operation |4.3.2 |a| |ii|| | 1 |
Front Brake indicates excessive fluctuation of brake effort |1.2.1 |e|| | 1 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Nearside Rear Footrest missing |6.2.1a| | 1 |
Offside Rear Footrest missing |6.2.1a| | 1 |
Nearside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Rear Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Rear Position lamp not working (4.2.1 (a)) | 1 |
Nearside Rear Lower Drive chain excessively loose (6.1.7 (c) (i)) | 1 |
Offside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Rear Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
Steering lock stop ineffective |2.1.3| | 1 |
Front Direction indicator not working |1.5.1c| | 1 |
Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride Rear sprocket nuts. |6.2.1h| | 1 |
Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Nearside Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Offside Rear Lower Brake locking device insecure |3.2.A1e| | 1 |
Centre Front Horn not working |1.7.3a| | 1 |
Offside Front Brake disc|s| insecure |3.2.A1g| | 1 |
Nearside Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Front Front wheel bearings are excessively rough |2.3.5b| | 1 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Headlamp aim beam image kick up to the offside |1.6| | 1 |
Inner Front Upper Steering headbearing has excessive free play |2.2.2| | 1 |
Nearside Rear Direction indicator insecure |1.5.3b| | 1 |
Offside Rear Direction indicator insecure |1.5.3b| | 1 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Front Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
Steering control handlebar movement restricted by taut cables |2.1.2c| | 1 |
Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Rear suspension bush has excessive free play rear swinging arm bushs have excessive free play |2.4.A2a|i|| | 1 |
Position lamp switch faulty |1.1.4a| | 1 |
Rear Rear wheel insecure |4.2.3b| | 1 |
Drive chain horseshoe locking device incorrectly fitted (6.1.7 (j) (i)) | 1 |