Most common failures | No# failures |
---|
Registration plate issues | 64 |
Headlamp aim out of alignment | 49 |
Rear reflector on motorcycle missing |1.4.1| | 47 |
Rear reflector missing (4.8.2 (a) (ii)) | 12 |
Rear Rear reflector on motorcycle missing |1.4.1| | 11 |
Horn not working |1.7.3a| | 9 |
Registration plate lamp issues | 7 |
Rear Rear reflector missing (4.8.2 (a) (ii)) | 5 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 5 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 3 |
Horn not working |7.7 |a| |ii|| | 3 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 3 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 3 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 3 |
Horn not working (7.7 (a) (ii)) | 2 |
Stop lamp remains on when the brakes are released | 2 |
Rear Rear reflector missing |4.8.2 |a| |ii|| | 2 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 2 |
Rear reflector missing |4.8.2 |a| |ii|| | 2 |
Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 2 |
Rear Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 2 |
Horn not working (7.7 (a)) | 2 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Front Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Rear Brake pedal insecure |3.1.2a| | 1 |
Steering headbearing in such a condition that steering control is adversely affected |2.2.2 |f| |ii|| | 1 |
Rear Drive chain worn to excess |6.2.1e| | 1 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 1 |
Centre Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Drive chain so worn it is likely to fail |6.1.7 |c| |ii|| | 1 |
Nearside Front Engine mounting/bracket excessively loose thread stripped in engine. (6.1.8 (a) (ii)) | 1 |
Drive chain excessively loose |6.2.1d| | 1 |
Front Horn not working (7.7 (a) (ii)) | 1 |
Rear Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |
Rear Suspension arm attachment bracket/mounting insecure (5.3.3 (a) (i)) | 1 |
Central Front Motorcycle structure joining/attachment plate or fastening insecure Front subframe insecure, repair carried out (6.1.1 (b) (i)) | 1 |
Rear Stop lamp does not emit a steady light |1.3.1b| | 1 |
Rear Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
Rear reflector on motorcycle missing (1.4.1) | 1 |
Central Front Position lamp not working (4.2.1 (a)) | 1 |
Front position lamp incorrect colour |1.1.2a| | 1 |
Riders seat insecure (6.2.5 (a) (ii)) | 1 |
Rear Drive chain sprocket worn to excess (6.1.7 (c) (i)) | 1 |
Nearside Front Direction indicators not working |1.5.1c| | 1 |
Stop lamp does not illuminate immediately a brake applies front |1.3.1a| | 1 |
Drive chain worn to excess |6.2.1e| | 1 |
Nearside Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Steering damper in such a condition that the steering action is impaired. |2.1.2d| | 1 |
Front wheel bearings are excessively rough |2.3.5b| | 1 |
Brake lever has abnormal movement of levers indicating excessive wear or maladjustment lever comes to throttle (1.1.15 (f)) | 1 |
Front Shock absorber has a serious fluid leak fork oil seals (5.3.2 (b)) | 1 |
Front Hydraulic brake control feels spongy |3.1.4a| | 1 |
Nearside Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Offside Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Front Brake lever is bent and the brake cannot be readily applied |3.1.3c| | 1 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Offside Rear Wheel alignment incorrect which adversely affects the handling Chain Adjuster not locked |2.5.1| | 1 |
Stop lamp not working from control 1(front lever) (4.3.1 (a) (ii)) | 1 |
Offside Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |
Stop lamp does not emit a steady light |1.3.1b| | 1 |
Offside All direction indicators not working |4.4.1 |a| |ii|| | 1 |
Headlamp aim so that beam "kick up" is not visible on the screen (4.1.2 (a)) | 1 |
Front Horn sounds harsh or grating |1.7.3c| | 1 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Rear Drive chain sprocket excessively loose (6.1.7 (c) (i)) | 1 |
Nearside Front Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |
Footrest insecure Near side front footrest loose |6.2.1a| | 1 |
Front Headlamp incorrect colour (4.1.4 (a)) | 1 |
Offside Handlebar deformed |2.1.1b| | 1 |
Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 1 |
Steering lock stop ineffective |2.1.3| | 1 |
Headlamp insecure |1.2.3b| | 1 |
Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Front Brake excessively binding (1.2.1 (f)) | 1 |
Nearside Front Shock absorber has a serious fluid leak Fork seal |5.3.2 |b|| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a)) | 1 |
Rear Rear reflector on sidecar missing |1.4.1| | 1 |
Front wheel spindle securing nut|s| loose |2.3.5a| | 1 |
Front Valve stem seriously damaged (5.2.3 (j)) | 1 |
Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
Nearside Rear Footrest insecure |6.2.1a| | 1 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Nearside Rear Lower Drive chain excessively tight |6.2.1d| | 1 |
Rear reflector on motorcycle incorrectly positioned |1.4.2d| | 1 |
Nearside Rear Drive chain excessively loose |6.2.1d| | 1 |
Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Offside Brake pedal insecure (1.1.2 (e) (i)) | 1 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Front position lamp deteriorated and function impaired |1.1.1b| | 1 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition |8.1.1 |a|| | 1 |
Nearside Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |
Nearside Front Footrest insecure (6.2.12 (a)) | 1 |
Offside Rear Footrest insecure (6.2.12 (a)) | 1 |
Rear Stop lamp not working rear switch not adjusted correctly |4.3.1 |a| |ii|| | 1 |
Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Nearside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Front Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 1 |