Most common failures | No# failures |
---|
Headlamp aim out of alignment | 11 |
Rear reflector on motorcycle missing |1.4.1| | 8 |
Registration plate issues | 8 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 7 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 5 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 5 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 4 |
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 4 |
Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
Rear Rear reflector on motorcycle missing |1.4.1| | 4 |
Drive chain excessively loose |6.2.1d| | 3 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 3 |
Rear Floor brake test indicates a binding brake |3.3.C2c| | 3 |
Brake pedal has inadequate reserve travel |3.1.3b| | 3 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 3 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 2 |
Offside Rear Direction indicator not working |1.5.1c| | 2 |
Rear Stop lamp not working |4.3.1 |a| |ii|| | 2 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
Nearside Rear Direction indicator not working |1.5.1c| | 2 |
Offside Front Direction indicator not working |1.5.1c| | 2 |
Nearside Direction indicators flashing more than 120 times per minute |1.5.1c| | 2 |
Steering headbearing has excessive free play |2.2.2| | 2 |
Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Brake lever has inadequate reserve travel |3.1.3b| | 2 |
Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 2 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Offside Front Direction indicators not working |1.5.1c| | 2 |
Nearside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
All direction indicators not working (4.4.1 (a) (ii)) | 1 |
Rear reflector missing |4.8.2 |a| |ii|| | 1 |
Rear Brake master cylinder insecurely mounted |3.2.B1a| | 1 |
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Front Position lamp not working |4.2.1 |a|| | 1 |
Offside Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
Rear reflector on sidecar incorrectly positioned |1.4.2d| | 1 |
Nearside Headlamp aim beam image kick up to the offside |1.6| | 1 |
Nearside Rear Footrest missing |6.2.1a| | 1 |
Offside Rear Footrest missing |6.2.1a| | 1 |
Rear Stop lamp missing |1.3.3a| | 1 |
Stop lamp does not illuminate immediately a brake applies Rear brake switch |1.3.1a| | 1 |
Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Front Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Nearside Front Direction indicator not working |1.5.1c| | 1 |
Horn not working |1.7.3a| | 1 |
Nearside Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Offside Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Headlamp aim not tested |1.6| | 1 |
Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Registration plate lamp issues | 1 |
Headlamp aim projected beam image obviously incorrect (4.1.2 (c)) | 1 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Rear Rear mono-shock insecure |2.4.B.4| | 1 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Nearside Front Brake disc|s| is excessively distorted |3.2.A1m| | 1 |
Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Rear Brake disc|s| excessively worn |3.2.A1l| | 1 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
Nearside Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Offside Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Front Direction indicator not working |1.5.1c| | 1 |
Rear Rear mono-shock pivot excessively worn |2.4.B.4| | 1 |
Front Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 1 |
Front Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Front Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Front Steering control handlebar movement restricted by trapped cables |2.1.2c| | 1 |
Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Nearside Rear Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Front Brake performance not tested |3.3| | 1 |
Rear Brake performance not tested |3.3| | 1 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Central Front Upper Horn sound not in accordance with requirements (7.7 (c)) | 1 |
Front Front position lamp damaged and function impaired |1.1.1b| | 1 |
Offside Front Brake disc|s| securing bolt|s| missing |3.2.A1g| | 1 |
Offside Front Direction indicator incorrect colour |1.5.1b| | 1 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Front Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Nearside Rear Direction indicators not working |1.5.1c| | 1 |
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Exhaust markings indicating not for road use or similar wording |7.1.4| | 1 |
Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Rear Exhaust markings indicating not for road use or similar wording |7.1.4| | 1 |
Rear Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Nearside Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Rear Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Brake lever has insufficient reserve travel |1.1.2 |a|| | 1 |
Throttle operating incorrectly |6.2.7 |a| |i|| | 1 |
Steering operation restricted in free movement from lock to lock on speedo cable |2.1.4 |c|| | 1 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Offside Handlebar mounting clamp bolt loose |2.1.1a| | 1 |