Most common failures | No# failures |
---|
Registration plate issues | 28 |
Headlamp aim out of alignment | 24 |
Rear reflector on motorcycle missing |1.4.1| | 16 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 13 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 12 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 8 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 7 |
Horn not working |1.7.3a| | 7 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 6 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 6 |
Steering headbearing has excessive free play |2.2.2| | 5 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 5 |
Drive chain excessively loose |6.2.1d| | 5 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 4 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 4 |
Rear Rear reflector on motorcycle missing |1.4.1| | 4 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 4 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 3 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 3 |
Riders seat insecure |6.2.1a| | 3 |
Rear Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 3 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 3 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 3 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 3 |
Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 3 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 3 |
Nearside Rear Direction indicator not working |1.5.1c| | 3 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i|| | 2 |
Exhaust has part of the system missing |7.1.1a| | 2 |
Drive chain excessively tight |6.2.1d| | 2 |
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 2 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 2 |
Front Throttle operating incorrectly |6.2.1f| | 2 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
Rear Rear suspension bush has excessive free play |2.4.A2a|i|| | 2 |
Nearside Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
Registration plate lamp issues | 2 |
Rear Floor brake test indicates a binding brake |3.3.C2c| | 2 |
Front Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 2 |
Drive chain worn to excess |6.2.1e| | 2 |
Stop lamp affected by the operation of another lamp |1.3.2| | 2 |
Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 2 |
Rear Brake disc|s| excessively worn |3.2.A1l| | 2 |
Horn not loud enough to be heard by another road user |1.7.3a| | 2 |
Offside Steering lock stop missing |2.1.3| | 2 |
Front Headlamp insecure |1.2.3b| | 2 |
Rear Brake indicates excessive fluctuation of brake effort |1.2.1 |e|| | 2 |
Rear Position lamp not working (4.2.1 (a)) | 2 |
Stop lamp remains on when the brake is released |1.3.1e| | 2 |
Rear Brake pedal insecure |3.1.2a| | 1 |
Nearside Front Direction indicator not working |1.5.1c| | 1 |
Front Brake lever mounting insecure |3.1.2a| | 1 |
Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
Direction indicator incorrect colour |1.5.1b| | 1 |
Rear Brake hose fouling |3.2.B3b| | 1 |
Rear Brake reaction bracket insecure |3.2.A1j| | 1 |
Rear Brake component has an inadequate repair |3.1.5| | 1 |
Offside Steering lock stop ineffective |2.1.3| | 1 |
Rear Brake fluid reservoir severely damaged |3.2.B1b| | 1 |
Upper Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Steering operation linkage fouling when handlebars turned from lock to lock |2.1.4 |a|| | 1 |
Horn control defective |1.7.2a| | 1 |
Rear Brake has no recorded effort at a wheel |1.2.1 |a| |ii|| | 1 |
Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Brake hose excessively deteriorated | 1 |
Front Brake pipe likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
Front Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Rear Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Offside Front Upper Brake caliper has no reserve travel and braking performance affected |1.1.16 |e| |ii|| | 1 |
Nearside Front Steering control handlebar movement restricted by trapped cables |2.1.2c| | 1 |
Rear Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Rear Brake pedal cannot be applied smoothly |3.1.3d| | 1 |
Front Steering headbearing has excessive free play |2.2.2| | 1 |
Rear Drive chain fouling another component |6.2.1d| | 1 |
Rear Drive chain excessively tight |6.2.1d| | 1 |
Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Rear Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
Front Front position lamp insecure |1.1.1c| | 1 |
Nearside Front Brake drum|s| insecure |3.2.A1g| | 1 |
Nearside Direction indicator not working |1.5.1c| | 1 |
Offside Direction indicator not working |1.5.1c| | 1 |
Front Front wheel bearings are excessively rough |2.3.5b| | 1 |
Front Stop lamp not working stop switch dirty (4.3.1 (a) (ii)) | 1 |
Nearside Front Footrest insecure |6.2.1a| | 1 |
Offside Front Footrest insecure |6.2.1a| | 1 |
Offside Rear Direction indicator not working |1.5.1c| | 1 |
Front Front suspension assembly has excessive free play in the pivot bearings. |2.3.2| | 1 |
Rear Chain guard insecure (6.1.7 (i)) | 1 |
Dipswitch does not operate immediately when selected on dipped beam (4.1.3 (b)) | 1 |
Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Rear Brake cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
Rear Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Brake hose damaged | 1 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
Headlamp not working on main beam |4.1.1 |a| |ii|| | 1 |
Stop lamp not working rear switch |4.3.1 |a| |ii|| | 1 |
Offside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Front Stop lamp does not emit a steady light |1.3.1b| | 1 |
Rear reflector missing |4.8.2 |a| |ii|| | 1 |
Nearside Front Steering lock stop missing |2.1.3| | 1 |
Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Front Brake lever has insufficient reserve travel |1.1.2 |a|| | 1 |
Nearside Handlebar grip insecure to handlebar |2.2.1 |d| |ii|| | 1 |
Front Stop lamp adversely affected by the operation of another lamp FRONT POSITION LIGHTS AS WELL |4.3.3 |b|| | 1 |
Stop lamp remains on when the brakes are released | 1 |
Front Brake fluid significantly below minimum mark |1.1.10 |d| |ii|| | 1 |
Front Wheel bearing rough when rotated |5.1.3 |b| |i|| | 1 |
Nearside Rear Direction indicators not working |1.5.1c| | 1 |
Rear All direction indicators obviously incorrectly positioned rear winkers to close together (4.4.3 (a)) | 1 |
Rear Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Front Direction indicators not working |1.5.1c| | 1 |
Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Offside Rear Direction indicators not working |1.5.1c| | 1 |
Rear Brake disc|s| excessively scored |3.2.A1l| | 1 |
Offside Front Brake lever attachment screws missing |3.1.2b| | 1 |
Offside Rear Footrest insecure |6.2.1a| | 1 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 1 |
Nearside Steering lock stop missing |2.1.3| | 1 |
Nearside Footrest missing |6.2.1a| | 1 |
Offside Footrest missing |6.2.1a| | 1 |
Front Headlamp aim headlamp damaged and function impaired |1.2.3a| | 1 |
Front suspension assembly excessive wear or free play in a front suspension component |2.3.4| | 1 |
Rear Brake pipe union leaking fluid |3.2.B4| | 1 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Rear Brake pedal pivots excessively worn |3.1.3a| | 1 |
Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Rear Brake hose leaking fluid |3.2.B4| | 1 |
Brake performance not tested |3.3| | 1 |
Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |
Hydraulic brake control feels spongy |3.1.4a| | 1 |
Plate brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.B2b| | 1 |
Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Brake pedal attachment screws loose |3.1.2b| | 1 |
Exhaust excessively deteriorated |7.1.1a| | 1 |
Rear Brake disc fractured (1.1.14 (a) (ii)) | 1 |
Steering control handlebar movement restricted by cables caught on a projection |2.1.2c| | 1 |
Rear Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
Front Stop lamp does not illuminate by the operation of both brake controls Doesn`t come on immediately when the brake is applied (4.3.2 (a) (iii)) | 1 |
Rear Hydraulic brake control feels spongy |3.1.4a| | 1 |
Horn not working (7.7 (a) (ii)) | 1 |
Nearside Front Direction indicators not working |1.5.1c| | 1 |
Nearside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Offside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Rear Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Stop lamp does not illuminate immediately a brake applies front brake switch |1.3.1a| | 1 |
Rear Position lamp not working |4.2.1 |a|| | 1 |
Front Steering lock stop missing |2.1.3| | 1 |
Front Brake master cylinder insecure (1.1.10 (c)) | 1 |
Fuel tank insecure (6.1.3 (a) (i)) | 1 |
Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 1 |
Nearside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Nearside Front Brake disc contaminated |1.1.14 |b|| | 1 |
Rear Wheel bearing has excessive play |5.1.3 |a| |i|| | 1 |
Rear Wheel bearing rough when rotated |5.1.3 |b| |i|| | 1 |
Nearside Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Front Headlamp aim beam image kick-up is to the offside |1.6.1| | 1 |
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Offside Brake disc contaminated (1.1.14 (b)) | 1 |
Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride Front sprocket nut |6.2.1h| | 1 |
Rear Direction indicator missing |1.5.1a| | 1 |
Front Direction indicator missing |1.5.1a| | 1 |
Front Brake hose leaking fluid |3.2.B4| | 1 |
Rear reflector on motorcycle incorrectly positioned |1.4.2d| | 1 |
Rear Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Headlamp aim headlamp damaged and function impaired |1.2.3a| | 1 |
Rear Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Rear wheel has a loose wheel nut|s| |4.2.3a| | 1 |
Headlamp insecure |1.2.3b| | 1 |
Front Front position lamp missing |1.1.1a| | 1 |
Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 1 |
Nearside Rear Direction indicator obscured |1.5.1a| | 1 |
Offside Rear Direction indicator damaged and function impaired |1.5.3a| | 1 |
Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Rear Direction indicator not working |1.5.1c| | 1 |
Centre Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Centre Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Nearside Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
Rear Brake pipe excessively damaged |3.2.B2a| | 1 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Headlamp switch faulty |1.2.4| | 1 |
Headlamp aim not tested |1.6| | 1 |
Offside Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
Nearside Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Offside Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Offside Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Rear Brake hose excessively kinked |3.2.B3a| | 1 |
Front Roller brake test indicates a severely juddering brake |3.3.A1b| | 1 |
Nearside Rear Direction indicator incorrect colour |1.5.1b| | 1 |
Offside Rear Direction indicator incorrect colour |1.5.1b| | 1 |
Rear Stop lamp does not emit a steady light |1.3.1b| | 1 |