Most common failures | No# failures |
---|
Headlamp aim out of alignment | 19 |
Registration plate issues | 17 |
Rear reflector on motorcycle missing |1.4.1| | 16 |
Rear Rear reflector on motorcycle missing |1.4.1| | 7 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 7 |
Steering headbearing has excessive free play |2.2.2| | 6 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 6 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 5 |
Horn not working |1.7.3a| | 5 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 4 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 4 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 4 |
Drive chain excessively loose |6.2.1d| | 3 |
Drive chain worn to excess |6.2.1e| | 3 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 3 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 3 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 3 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 3 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 3 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 3 |
Throttle operating incorrectly |6.2.1f| | 3 |
Nearside Front Footrest insecure |6.2.1a| | 2 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Headlamp aim beam image kick up to the offside |1.6| | 2 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 2 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 2 |
Front Front position lamp missing |1.1.1a| | 2 |
Front Horn not working |1.7.3a| | 2 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
Chain guard insecure |6.2.1c| | 2 |
Horn not working (7.7 (a) (ii)) | 2 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Drive chain excessively tight |6.2.1d| | 2 |
Centre Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Front wheel bearings are excessively rough |2.3.5b| | 1 |
Drive chain excessively tight (6.1.7 (k) (i)) | 1 |
Steering operation restricted in free movement from lock to lock Clutch cable on right lock. Wiring loom on left lock. (2.1.4 (c)) | 1 |
Front Drive chain sprocket worn to excess |6.2.1e| | 1 |
Indicator tell tale not functioning |1.5.2| | 1 |
Fuel system component leaking Fuel Tap |7.2.1a| | 1 |
Offside Front Direction indicator insecure |1.5.3b| | 1 |
Centre Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Rear Plate brake test indicates a binding brake |3.3.B1a| | 1 |
Plate brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.B2b| | 1 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Nearside Rear Footrest missing |6.2.1a| | 1 |
Front Brake lever is bent and the brake cannot be readily applied |3.1.3c| | 1 |
Centre Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Nearside Rear Direction indicator not working |1.5.1c| | 1 |
Offside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Centre Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Centre Front Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Front Position lamp not working |4.2.1 |a|| | 1 |
Rear Brake disc|s| securing bolt|s| loose |3.2.A1g| | 1 |
Offside Front Direction indicator not working |1.5.1c| | 1 |
Rear Drive chain worn to excess |6.2.1e| | 1 |
Offside Front Footrest insecure |6.2.1a| | 1 |
Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Nearside Direction indicator not working |1.5.1c| | 1 |
Front Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
Front Brake pipe inadequately supported |3.2.B2b| | 1 |
Front Brake master cylinder insecurely mounted |3.2.B1a| | 1 |
Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
Rear Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Rear Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Front Headlamp incorrect colour |1.2.1| | 1 |
Front Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Rear Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Nearside Front Direction indicator insecure |1.5.3b| | 1 |
Offside Rear Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Offside Rear Exhaust markings indicating not for road use or similar wording |7.1.4| | 1 |
Headlamp aim beam image kick-up is to the offside |1.6.1| | 1 |
Front Steering headbearing has excessive free play |2.2.2| | 1 |
Front Front suspension assembly component excessively bent |2.3.1| | 1 |
Front Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Front Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Outer Rear Direction indicator deteriorated and function impaired |1.5.3a| | 1 |
Front Direction indicator incorrect colour |1.5.1b| | 1 |
Rear Direction indicator incorrect colour |1.5.1b| | 1 |
Exhaust excessively deteriorated |7.1.1a| | 1 |
Nearside Front Direction indicators not working |1.5.1c| | 1 |
Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
Rear Brake pedal mounting insecure |3.1.2a| | 1 |
Exhaust markings indicating not for road use or similar wording |7.1.4| | 1 |
Front position lamp incorrect colour |1.1.2a| | 1 |
Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Rear Horn not working |7.7 |a| |ii|| | 1 |
Nearside Front Brake component leaking fluid caliper |3.2.B4| | 1 |
Steering control handlebar movement restricted by taut cables |2.1.2c| | 1 |
Front Position lamp not working (4.2.1 (a)) | 1 |
Rear Drive chain excessively tight |6.2.1d| | 1 |
Front Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
Steering damper ineffective |2.1.2d| | 1 |
Hydraulic brake control feels spongy |3.1.4a| | 1 |
Nearside Front Brake component has an inadequate repair |3.1.5| | 1 |
Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
Front Hydraulic brake control feels spongy |3.1.4a| | 1 |
Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Central Rear Upper Shock absorber likely to become detached locknut not fully fitted, checked and re fitted. (5.3.2 (a) (ii)) | 1 |
Front wheel bearings have excessive free play |2.3.5b| | 1 |
Nearside Footrest insecure |6.2.1a| | 1 |
Offside Footrest insecure |6.2.1a| | 1 |
Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Brake component is fractured |3.1.5| | 1 |
Nearside Fairing so located that it is likely to impede the steering |2.1.2e| | 1 |
Front Brake hose excessively twisted |3.2.B3a| | 1 |
Fairings so located that it is likely to impede the steering |2.1.2e| | 1 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
Riders seat insecure |6.2.1a| | 1 |
Fuel system component insecure |7.2.1b| | 1 |
Fairing so located that it is likely to impede the steering |2.1.2e| | 1 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Nearside Rear Drive chain excessively tight |6.2.1d| | 1 |
Brake disc|s| securing bolt|s| loose |3.2.A1g| | 1 |