Most common failures | No# failures |
---|
Headlamp aim out of alignment | 40 |
Registration plate issues | 25 |
Rear reflector on motorcycle missing |1.4.1| | 20 |
Drive chain excessively loose |6.2.1d| | 13 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 10 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 10 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 8 |
Offside Front Direction indicator not working |1.5.1c| | 7 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 7 |
Horn not working |1.7.3a| | 7 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 6 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 6 |
Rear Rear reflector on motorcycle missing |1.4.1| | 6 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 5 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 5 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 5 |
Exhaust is leaking and excessively noisey |7.1.1b| | 5 |
Steering headbearing has excessive free play |2.2.2| | 5 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 5 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 4 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 4 |
Horn not loud enough to be heard by another road user |1.7.3a| | 4 |
Nearside Front Direction indicator not working |1.5.1c| | 4 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 4 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 3 |
Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 3 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Direction indicators not working |1.5.1c| | 3 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 3 |
Front wheel bearings are excessively rough |2.3.5b| | 3 |
Throttle operating incorrectly |6.2.1f| | 3 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 3 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 2 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 2 |
Offside Front Footrest insecure |6.2.1a| | 2 |
Nearside Rear Direction indicator not working |1.5.1c| | 2 |
Riders seat insecure |6.2.1a| | 2 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Steering control handlebar movement restricted by taut cables |2.1.2c| | 2 |
Drive chain worn to excess |6.2.1e| | 2 |
Front Brake disc|s| has excessive run out |3.2.A1m| | 2 |
Rear Brake disc|s| excessively worn |3.2.A1l| | 2 |
Rear Hydraulic brake control feels spongy |3.1.4a| | 2 |
Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 2 |
Headlamp aim beam image kick up to the offside |1.6| | 2 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 2 |
Exhaust markings indicating not for road use or similar wording |7.1.4| | 2 |
Front position lamp incorrect colour |1.1.2a| | 2 |
Drive chain excessively tight |6.2.1d| | 2 |
Front Headlamp aim beam image too far to the left |1.6.4| | 1 |
Horn control not functioning. |1.7.2b| | 1 |
Rear Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Rear Position lamp not working |4.2.1 |a|| | 1 |
Front Valve stem seriously damaged |5.2.3 |j|| | 1 |
Front Front position lamp incorrect colour |1.1.2a| | 1 |
Position lamp switch faulty |1.1.4a| | 1 |
Offside Front Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
Rear Rear reflector on sidecar missing |1.4.1| | 1 |
Rear Brake reaction bracket insecure |3.2.A1j| | 1 |
Offside Rear Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Stop lamp remains on when the brakes are released | 1 |
Fuel system component insecure fuel tank |7.2.1b| | 1 |
Rear Wheel has an excessively eccentric bead rim. |4.2.2| | 1 |
Rear Brake disc|s| is excessively distorted |3.2.A1m| | 1 |
Nearside Rear Direction indicators not working |1.5.1c| | 1 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Offside Rear Footrest missing |6.2.1a| | 1 |
Rear Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Rear Brake caliper insecurely mounted and braking performance affected |1.1.16 |c| |ii|| | 1 |
Rear Brake caliper leaking and braking performance affected |1.1.16 |b| |ii|| | 1 |
Offside Front Direction indicators not working |1.5.1c| | 1 |
Rear Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
Front Brake master cylinder insecurely mounted |3.2.B1a| | 1 |
Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Throttle operating incorrectly (6.2.7 (a) (i)) | 1 |
Front Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 1 |
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Headlamp aim projected beam image obviously incorrect kick up on o/s (4.1.2 (c)) | 1 |
Front position lamp insecure |1.1.1c| | 1 |
Offside Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Front Brake lever attachment screws loose |3.1.2b| | 1 |
Horn is not continous or uniform |1.7.3c| | 1 |
Nearside Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
Steering control has Insufficient clearance at full lock affecting the riders operation of the controls |2.1.2b| | 1 |
Rear reflector on motorcycle obscured |1.4.1| | 1 |
Rear Valve stem seriously damaged (5.2.3 (j)) | 1 |
Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Registration plate lamp issues | 1 |
Nearside Rear Position lamp not working (4.2.1 (a)) | 1 |
Brake lever attachment screws missing |3.1.2b| | 1 |
Rear Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Rear mono-shock insecure |2.4.B.4| | 1 |
Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Offside Front Brake disc contaminated (1.1.14 (b)) | 1 |
Rear Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Front Direction indicator insecure |1.5.3b| | 1 |
Front Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Rear Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Offside Front Direction indicator insecure |1.5.3b| | 1 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Front Hydraulic brake control feels spongy |3.1.4a| | 1 |
Rear wheel bearings are excessively rough |2.4.A.2c| | 1 |
Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
Front Brake disc|s| excessively pitted |3.2.A1l| | 1 |
Drive chain sprocket worn to excess |6.2.1e| | 1 |
Exhaust excessively deteriorated |7.1.1a| | 1 |
Rear Brake hose leaking fluid |3.2.B4| | 1 |
Rear Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Front wheel bearings have excessive free play |2.3.5b| | 1 |
Front Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
Rear Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Rear Brake disc|s| excessively scored |3.2.A1l| | 1 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Front Brake lever pivots excessively worn |3.1.3a| | 1 |
Front Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Rear Wheel damaged significantly reducing the original strength |4.2.1a| | 1 |
Front Headlamp aim beam image kick up to the offside |1.6| | 1 |
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Rear Brake caliper|s| insecure |3.2.A1j| | 1 |
Handlebar deformed |2.1.1b| | 1 |
Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Rear Brake reaction bracket securing bolt|s| loose |3.2.A1j| | 1 |
Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 1 |
Headlamp aim not tested |1.6| | 1 |
Front position lamp missing |1.1.1a| | 1 |
Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Offside Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Offside Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Front Horn not working |1.7.3a| | 1 |
Horn sounds harsh or grating |1.7.3c| | 1 |
Offside Handlebar deformed |2.1.1b| | 1 |
Offside Lower Brake reaction bracket securing bolt|s| loose |3.2.A1j| | 1 |
Offside Lower Footrest insecure |6.2.1a| | 1 |
Nearside Brake pedal insecure |3.1.2a| | 1 |
Offside Lower Brake pedal insecure |3.1.2a| | 1 |
Lower Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Offside Rear Brake locking device missing |3.2.A1e| | 1 |
Front Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
Brake performance not tested |1.2.1 |g|| | 1 |
Rear Brake has no recorded effort at a wheel |1.2.1 |a| |ii|| | 1 |
Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Brake hose damaged | 1 |
Rear Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
Rear All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Upper Rear shock absorber insecurely mounted |2.4.A.3b| | 1 |
Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
Nearside Front Direction indicators not working |1.5.1c| | 1 |
Offside Rear Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Drive chain fouling another component |6.2.1d| | 1 |
Rear wheel spindle loose |2.4.A.2b| | 1 |
Brake lever cannot be applied smoothly |3.1.3d| | 1 |
Indicator switch insecure |1.5.4| | 1 |
Front Front wheel bearings are excessively rough |2.3.5b| | 1 |
Nearside Front Brake caliper|s| securing bolt|s| loose |3.2.A1j| | 1 |
Nearside Front Footrest insecure |6.2.1a| | 1 |
Rear Brake cylinder insecurely mounted |3.2.B1a| | 1 |
Direction indicator missing |1.5.1a| | 1 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Stop lamp does not illuminate immediately a brake applies Front brake light inoperative |1.3.1a| | 1 |
Front Headlamp incorrect colour |1.2.1| | 1 |
Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Upper Steering headbearing has excessive free play |2.2.2| | 1 |
Headlamp incorrect colour |1.2.1| | 1 |
Chain guard insecure |6.2.1c| | 1 |
Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Offside Front Brake component leaking fluid |3.2.B4| | 1 |
Offside Front Brake component is excessively corroded |3.1.5| | 1 |
Rear Exhaust markings indicating not for road use or similar wording |7.1.4| | 1 |
Brake hose excessively deteriorated | 1 |