Most common failures | No# failures |
---|
Headlamp aim out of alignment | 28 |
Registration plate issues | 15 |
Rear reflector on motorcycle missing |1.4.1| | 14 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 11 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 10 |
Front shock absorber seal failed and leaking oil |2.3.3| | 9 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 6 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 5 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 5 |
Horn not working |1.7.3a| | 4 |
Nearside Front Direction indicators not working |1.5.1c| | 4 |
Rear Rear reflector on motorcycle missing |1.4.1| | 4 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
Headlamp aim beam image kick up to the offside |1.6| | 4 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 4 |
Nearside Front Direction indicator not working |1.5.1c| | 3 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 3 |
Rear Brake pedal has inadequate reserve travel |3.1.3b| | 3 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 3 |
Nearside Rear Direction indicators not working |1.5.1c| | 3 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 2 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
Rear Brake master cylinder insecurely mounted |3.2.B1a| | 2 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
Rear Floor brake test indicates a binding brake |3.3.C2c| | 2 |
Registration plate lamp issues | 2 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 2 |
Nearside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 2 |
Front Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 2 |
Fairings insecure and likely to impede the steering |2.1.2e| | 2 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 2 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
Rear reflector missing |4.8.2 |a| |ii|| | 2 |
Offside Front Direction indicator not working |1.5.1c| | 2 |
Offside Rear Direction indicator not working |1.5.1c| | 2 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 2 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Rear Brake master cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
Rear Stop lamp missing |1.3.3a| | 1 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Offside Front Brake pedal mounting cracked . |3.1.2c| | 1 |
Offside Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Nearside Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
Offside Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Exhaust markings indicating not for road use or similar wording |7.1.4| | 1 |
Direction indicator flashing less than 60 times a minute with lights on |1.5.1c| | 1 |
Nearside Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Rear Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 1 |
Rear shock absorber insecurely mounted |2.4.A.3b| | 1 |
Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
Rear Brake caliper|s| securing bolt|s| loose |3.2.A1j| | 1 |
Rear Drive chain worn to excess |6.2.1e| | 1 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 1 |
Front Drive chain sprocket worn to excess |6.2.1e| | 1 |
Nearside Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Rear Brake reaction bracket insecure |3.2.A1j| | 1 |
Brake hose damaged | 1 |
Rear Brake disc|s| excessively worn |3.2.A1l| | 1 |
Centre Lower Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Front All position lamps adversely affected by the operation of another lamp |1.1.3b| | 1 |
Front All position lamps adversely affected by the operation of the horn |1.1.3b| | 1 |
Offside Rear Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Rear Brake component damaged and seriously reduced in strength |3.2.A1| | 1 |
Rear Exhaust mounting missing |7.1.1c| | 1 |
Rear Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
Nearside Front Brake disc significantly and obviously worn excessive play in rivets (1.1.14 (a) (i)) | 1 |
Offside Front Brake disc significantly and obviously worn excessive play in rivets (1.1.14 (a) (i)) | 1 |
Headlamp insecure (4.1.1 (c)) | 1 |
Riders seat insecure |6.2.1a| | 1 |
Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Rear Rear wheel insecure |4.2.3b| | 1 |
Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Headlamp insecure |1.2.3b| | 1 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Offside Front Lower Brake hose excessively twisted |3.2.B3a| | 1 |
Front wheel bearings are excessively rough |2.3.5b| | 1 |
Offside Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
Offside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Front Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Rear Stop lamp not working Rear brake light switch wires had fallen off. (4.3.1 (a) (ii)) | 1 |
Rear Stop lamp adversely affected by the operation of another lamp |4.3.3 |b|| | 1 |
Rear Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
Rear Brake pipe union leaking fluid |3.2.B4| | 1 |
Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Rear Brake disc|s| insecure |3.2.A1g| | 1 |
Front Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
Nearside Footrest missing |6.2.1a| | 1 |
Rear Brake locking device insecure |3.2.A1e| | 1 |
Front Steering lock stop missing |2.1.3| | 1 |
Nearside Handlebar mounting clamp loose |2.1.1a| | 1 |
Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Front Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |
Front Handlebar mounting insecure (2.2.1 (a) (i)) | 1 |
Nearside Front Lower Headlamp dipped beam flickers when tapped lightly by hand |1.2.2c| | 1 |
Nearside Front Upper Headlamp aim headlamp damaged and function impaired |1.2.3a| | 1 |
Offside Rear Upper Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Nearside Front Upper Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Nearside Rear Direction indicator obscured |1.5.1a| | 1 |
Rear reflector on motorcycle incorrectly positioned |1.4.2d| | 1 |
An item not tested |Manual| | 1 |
Offside Rear Motorcycle structure cracked |6.1.1a| | 1 |
Offside Steering control handlebar movement restricted by trapped cables |2.1.2c| | 1 |
Drive chain excessively loose |6.2.1d| | 1 |
Drive chain worn to excess |6.2.1e| | 1 |
Front Stop lamp does not emit a steady light |1.3.1b| | 1 |
Direction indicators not working |1.5.1c| | 1 |
Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Rear Brake caliper|s| securing bolt|s| loose all four bolts loose |3.2.A1j| | 1 |
Rear Wheel bearing play so excessive it is likely to break up Collapsed (5.1.3 (a) (ii)) | 1 |
Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Rear Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Rear Rear wheel bearings are excessively tight |2.4.A.2c| | 1 |
Rear Brake caliper|s| securing bolt|s| missing |3.2.A1j| | 1 |
Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Nearside Steering control has Insufficient clearance at full lock affecting the riders operation of the controls |2.1.2b| | 1 |
Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
Rear Brake pedal mounting insecure |3.1.2a| | 1 |
Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
Rear suspension fouling which affects the movement of the rear suspension |2.4.A.3a| | 1 |
Front Brake lever insecure |3.1.2a| | 1 |
Nearside Rear Direction indicator damaged and function impaired |1.5.3a| | 1 |
Fuel cap does not fasten securely maintaining the sealing arrangement |7.2.2b| | 1 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Throttle operating incorrectly |6.2.1f| | 1 |
Clutch lever shortened so it cannot be readily operated. |6.2.1g| | 1 |
Handlebar mounting clamp loose |2.1.1a| | 1 |
Rear Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
Headlamp incorrect colour |1.2.1| | 1 |
Rear Brake locking device missing |3.2.A1e| | 1 |
Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Nearside Steering lock stop missing |2.1.3| | 1 |
Steering lock stop ineffective |2.1.3| | 1 |
Indicator tell tale not functioning |1.5.2| | 1 |
Fuel tank leaking |7.2.1a| | 1 |
Rear reflector on motorcycle insecure |1.4.2c| | 1 |
Front position lamp incorrect colour |1.1.2a| | 1 |
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |