| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 7 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 4 |
| Headlamp aim beam image kick up to the offside |1.6| | 4 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 4 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 3 |
| Front wheel bearings are excessively rough |2.3.5b| | 3 |
| Front wheel bearings have excessive free play |2.3.5b| | 3 |
| Drive chain excessively loose |6.2.1d| | 2 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
| Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
| Drive chain worn to excess |6.2.1e| | 2 |
| Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
| Horn not working |1.7.3a| | 2 |
| Registration plate lamp issues | 2 |
| Rear Floor brake test indicates a binding brake |3.3.C2c| | 2 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
| Rear reflector on motorcycle missing |1.4.1| | 1 |
| Locking devices not correctly fitted which may make the motor bicycle dangerous to ride chain link |6.2.1h| | 1 |
| Rear reflector on motorcycle missing relfector missing |1.4.1| | 1 |
| Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
| Nearside Rear Footrest missing |6.2.1a| | 1 |
| Offside Rear Footrest missing |6.2.1a| | 1 |
| Rear Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a)) | 1 |
| Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
| Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
| Rear Riders seat insecure (6.2.5 (a) (ii)) | 1 |
| Front Fuel pipe insecure NO RETAINING CLIPS & INCORRECT SIZE FITTINGS/PIPES (6.1.3 (a) (i)) | 1 |
| Front Vehicle identification number obviously falsified (0.2 (b)) | 1 |
| Rear Suspension rod pin or bush excessively worn Bottom bracket (5.3.4 (a) (i)) | 1 |
| Rear Drive chain sprocket worn to excess (6.1.7 (c) (i)) | 1 |
| Front Shock absorber has a serious fluid leak Both (5.3.2 (b)) | 1 |
| Front Brake excessively binding (1.2.1 (f)) | 1 |
| Rear Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |
| Rear Brake excessively binding (1.2.1 (f)) | 1 |
| Rear Brake disc significantly and obviously worn (1.1.14 (a) (i)) | 1 |
| Front Stop lamp switch with a delay in operation brake light does not operate when front brake lever is applied (4.3.2 (a) (ii)) | 1 |
| Rear Position lamp not working |4.2.1 |a|| | 1 |
| Offside Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Front Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
| Drive chain excessively loose |6.1.7 |c| |i|| | 1 |
| Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
| Brake performance not tested |3.3| | 1 |
| Front An item not tested |Manual| | 1 |
| Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 1 |
| Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 1 |
| Offside Front Direction indicator not working |1.5.1c| | 1 |
| Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
| Horn not working (7.7 (a)) | 1 |
| Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
| Front Horn not working (7.7 (a)) | 1 |
| Offside Front Footrest insecure (6.2.12 (a)) | 1 |
| Nearside Front Footrest insecure (6.2.12 (a)) | 1 |
| Rear Stop lamp not working Rear brake light switch needs adjusting (4.3.1 (a) (ii)) | 1 |
| Offside Rear Brake pedal anti-slip provision missing (1.1.2 (c)) | 1 |
| Nearside Front Brake cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
| Front Roller brake test indicates a severely juddering brake |3.3.A1b| | 1 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Rear Brake pedal anti-slip provision missing (1.1.2 (c)) | 1 |
| Drive chain excessively loose (6.1.7 (c) (i)) | 1 |
| Front Front mudguard insecure |2.3.7| | 1 |
| Stop lamp remains on when the brake is released front brake applied |1.3.1e| | 1 |
| Nearside Headlamp aim beam image kick up to the offside |1.6| | 1 |
| Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
| Rear Brake caliper|s| securing bolt|s| missing |3.2.A1j| | 1 |
| Exhaust markings indicating not for road use or similar wording |7.1.4| | 1 |
| Registration plate issues | 1 |
| Front Front suspension assembly component loose |2.3.1| | 1 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Nearside Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
| Offside Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
| Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Throttle operating incorrectly syays on when in lock |6.2.1f| | 1 |
| Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Nearside Brake disc|s| friction surface contaminated by oil or grease fork oil |3.2.A1k| | 1 |
| Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
| Steering control handlebar movement restricted by taut cables |2.1.2c| | 1 |
| Nearside Front Brake disc|s| insecure |3.2.A1g| | 1 |
| Front Hydraulic brake control feels spongy |3.1.4a| | 1 |
| Brake locking device insecure |3.2.A1e| | 1 |
| Nearside Rear Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
| Drive chain excessively tight |6.2.1d| | 1 |
| Front Drive chain sprocket worn to excess |6.2.1e| | 1 |
| Headlamp aim beam image kick-up is to the offside |1.6.1| | 1 |
| Throttle operating incorrectly |6.2.1f| | 1 |