Most common failures | No# failures |
---|
Headlamp aim out of alignment | 17 |
Rear reflector on motorcycle missing |1.4.1| | 10 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 8 |
Registration plate issues | 6 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 5 |
Drive chain excessively loose |6.2.1d| | 4 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 4 |
Headlamp aim beam image kick up to the offside |1.6| | 4 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 3 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 3 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 3 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 3 |
Nearside Front Direction indicators not working |1.5.1c| | 3 |
Horn not working |1.7.3a| | 3 |
Offside Front Direction indicator not working |1.5.1c| | 3 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 2 |
Rear Floor brake test indicates a binding brake |3.3.C2c| | 2 |
Steering headbearing has excessive free play |2.2.2| | 2 |
Direction indicators not working |1.5.1c| | 2 |
Rear Brake locking device missing |3.2.A1e| | 2 |
Offside Front Footrest insecure |6.2.1a| | 2 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Rear Rear reflector on motorcycle missing |1.4.1| | 2 |
Throttle operating incorrectly |6.2.1f| | 2 |
Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 2 |
Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
Horn not loud enough to be heard by another road user |1.7.3a| | 2 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Nearside Rear Upper Shock absorber has an excessively worn bush (5.3.2 (c)) | 1 |
Offside Rear Upper Shock absorber has an excessively worn bush (5.3.2 (c)) | 1 |
Rear Valve stem seriously damaged (5.2.3 (j)) | 1 |
Centre Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Rear Brake locking device missing Brake caliper arm stay |3.2.A1e| | 1 |
Front Brake disc|s| insecure |3.2.A1g| | 1 |
Offside Handlebar handgrip missing |2.1.1c| | 1 |
Front Brake hose leaking fluid |3.2.B4| | 1 |
Nearside Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Rear Brake reaction bracket securing bolt|s| loose |3.2.A1j| | 1 |
Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Rear wheel bearings are excessively rough |2.4.A.2c| | 1 |
Nearside Steering lock stop ineffective |2.1.3| | 1 |
Offside Steering lock stop ineffective |2.1.3| | 1 |
Upper Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
Front Plate brake test indicates a binding brake |3.3.B1a| | 1 |
Offside Front Indicator tell tale not functioning |1.5.2| | 1 |
Horn control not functioning. |1.7.2b| | 1 |
Stop lamp does not illuminate immediately a brake applies brake lever |1.3.1a| | 1 |
Rear Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Rear Brake component inadequately mounted missing split pin. (1.1.21 (c)) | 1 |
Offside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
Front All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Offside Front Brake lining|s| missing Pad material coming away from metal backing |1.1.13 |c|| | 1 |
Front Brake fluid significantly below minimum mark brake fluid very low |1.1.10 |d| |ii|| | 1 |
Front Steering headbearing in such a condition that steering control is adversely affected head bearings knotching and very stiff turn |2.2.2 |f| |ii|| | 1 |
Front Headlamp aim so that beam "kick up" is not visible on the screen |4.1.2 |a|| | 1 |
Drive chain worn to excess |6.2.1e| | 1 |
Front Drive chain sprocket worn to excess |6.2.1e| | 1 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 1 |
Nearside Front Direction indicator not working |1.5.1c| | 1 |
Nearside Front Steering lock stop ineffective |2.1.3| | 1 |
Front Brake master cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
Stop lamp does not illuminate immediately a brake applies Rear switch |1.3.1a| | 1 |
Front wheel bearings have excessive free play |2.3.5b| | 1 |
All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
Front Front suspension assembly component cracked |2.3.1| | 1 |
Nearside Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Offside Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Front Headlamp aim beam image kick up to the offside |1.6| | 1 |
Centre Front All position lamps adversely affected by the operation of another lamp |1.1.3b| | 1 |
Centre Rear Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
Offside Rear Direction indicator not working |1.5.1c| | 1 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
Rear Brake caliper|s| securing bolt|s| loose |3.2.A1j| | 1 |
Nearside Rear Direction indicator not working |1.5.1c| | 1 |
Rear Direction indicator insecure |1.5.3b| | 1 |
Offside Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Rear Brake disc|s| excessively worn |3.2.A1l| | 1 |
Front Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
Rear Brake cylinder has no reserve travel and braking performance affected |1.1.16 |e| |ii|| | 1 |
Drive chain excessively tight |6.2.1d| | 1 |
Nearside Front Footrest insecure |6.2.1a| | 1 |
Nearside Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |
All position lamps adversely affected by the operation of another lamp |1.1.3b| | 1 |
Front Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
Front Brake component worn and seriously reduced in strength |3.2.A1| | 1 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Front Brake indicates excessive fluctuation of brake effort |1.2.1 |e|| | 1 |
Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Centre Rear Lower Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Front Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Nearside Rear Footrest missing |6.2.1a| | 1 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |