Most common failures | No# failures |
---|
Registration plate issues | 15 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 14 |
Rear reflector on motorcycle missing |1.4.1| | 10 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 9 |
Headlamp aim out of alignment | 6 |
Exhaust is leaking and excessively noisey |7.1.1b| | 5 |
Drive chain worn to excess |6.2.1e| | 4 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
Steering headbearing has excessive free play |2.2.2| | 3 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 3 |
Drive chain excessively loose |6.2.1d| | 3 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 3 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 3 |
Nearside Front Direction indicator not working |1.5.1c| | 2 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 2 |
Front wheel bearings are excessively rough |2.3.5b| | 2 |
Front Drive chain sprocket worn to excess |6.2.1e| | 2 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 2 |
Front Roller brake test indicates a severely grabbing brake |3.3.A1b| | 2 |
Headlamp aim beam image kick up to the offside |1.6| | 2 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
Horn not working |1.7.3a| | 2 |
Front Steering headbearing has excessive free play |2.2.2| | 2 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 2 |
Nearside Front Brake disc|s| insecure |3.2.A1g| | 2 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 2 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Front Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 2 |
Rear Brake disc|s| excessively scored |3.2.A1l| | 2 |
Offside Front Direction indicator not working |1.5.1c| | 2 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Offside Front Direction indicator insecure |1.5.3b| | 2 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
Rear mono-shock pivot seized |2.4.B.4| | 1 |
Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Centre Steering movement excessively rough with the wheel raised |2.2.1b| | 1 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Centre Front Brake cylinder severely corroded |3.2.B1b| | 1 |
Front wheel bearings have excessive free play |2.3.5b| | 1 |
Indicator switch insecure |1.5.4| | 1 |
Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Headlamp switch insecure |1.2.4| | 1 |
Front Fuel hose leaking |7.2.1a| | 1 |
Rear Brake disc|s| excessively worn |3.2.A1l| | 1 |
Front Brake master cylinder fluid level dangerously low |3.2.B1d| | 1 |
Rear Direction indicator obviously incorrectly positioned less than 240mm apart | measured to centre of bulb | |4.4.3 |a|| | 1 |
Front Wheel bearing rough when rotated |5.1.3 |b| |i|| | 1 |
Rear Plate brake test indicates a sticking brake |3.3.B1a| | 1 |
Brake pedal cannot be applied smoothly |3.1.3d| | 1 |
Plate brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.B2b| | 1 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Offside Rear Lower Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Offside Front Lower Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Nearside Rear Lower Drive chain worn to excess |6.2.1e| | 1 |
Nearside Rear Lower Drive chain sprocket worn to excess |6.2.1e| | 1 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Fuel system component leaking |7.2.1a| | 1 |
Rear Brake component defective due to a deliberate modification which significantly reduces the original strength |3.1.5| | 1 |
Front Exhaust mounting missing |7.1.1c| | 1 |
Fuel hose leaking |7.2.1a| | 1 |
Front Brake lever attachment screws loose |3.1.2b| | 1 |
Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Offside Rear Roller brake test indicates a severely juddering brake |3.3.A1b| | 1 |
Rear Drive chain sprocket carrier worn to excess |6.2.1e| | 1 |
Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Rear Brake caliper|s| securing bolt|s| loose |3.2.A1j| | 1 |
Nearside Front Direction indicators not working |1.5.1c| | 1 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Rear wheel rotation likely to be impeded |6.2.1b| | 1 |
Front Brake locking device missing torque arm mounting split pin missing |3.2.A1e| | 1 |
Rear Brake locking device missing torque arm mounting bolt split pin missing |3.2.A1e| | 1 |
Front Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Nearside Rear Direction indicator insecure |1.5.3b| | 1 |
Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Rear Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Drive chain excessively tight |6.2.1d| | 1 |
Riders seat insecure |6.2.1a| | 1 |
An item not tested |Manual| | 1 |
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 1 |
Rear Direction indicator insecure |1.5.3b| | 1 |
Offside Steering lock stop ineffective |2.1.3| | 1 |
Nearside Rear Footrest missing |6.2.1a| | 1 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Exhaust excessively deteriorated |7.1.1a| | 1 |
Rear Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Front An item not tested |Manual| | 1 |
Front Position lamp not working (4.2.1 (a)) | 1 |
Nearside Front Direction indicator incorrect colour |1.5.1b| | 1 |
Offside Front Direction indicator incorrect colour |1.5.1b| | 1 |
Nearside Rear Direction indicator incorrect colour |1.5.1b| | 1 |
Offside Rear Direction indicator incorrect colour |1.5.1b| | 1 |
Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Rear Brake locking device missing |3.2.A1e| | 1 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Front Brake lever is bent and the brake cannot be readily applied |3.1.3c| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |
Front Brake lever has abnormal movement of levers indicating excessive wear or maladjustment |1.1.15 |f|| | 1 |
Offside Front Upper Brake lever is damaged and the brake cannot be readily applied |3.1.3c| | 1 |
Offside Front Brake disc|s| insecure |3.2.A1g| | 1 |
Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
Rear Brake disc|s| is excessively distorted |3.2.A1m| | 1 |
Rear Brake excessively binding (1.2.1 (f)) | 1 |