| Most common failures | No# failures |
|---|
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 10 |
| Headlamp aim out of alignment | 9 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 8 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 6 |
| Registration plate issues | 5 |
| Drive chain excessively loose |6.2.1d| | 5 |
| Rear reflector on motorcycle missing |1.4.1| | 4 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
| Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 3 |
| Drive chain excessively tight |6.2.1d| | 3 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 3 |
| Rear Brake disc significantly and obviously worn (1.1.14 (a) (i)) | 2 |
| Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
| Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 2 |
| Nearside Front Direction indicators not working |1.5.1c| | 2 |
| Steering headbearing has excessive free play |2.2.2| | 2 |
| Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
| Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 2 |
| Rear Brake caliper|s| securing bolt|s| loose |3.2.A1j| | 2 |
| Registration plate lamp issues | 2 |
| Fuel system component leaking |7.2.1a| | 2 |
| Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
| Front Horn not working |1.7.3a| | 2 |
| Rear Brake disc|s| excessively worn |3.2.A1l| | 2 |
| Front Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 2 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
| Nearside Front Front suspension assembly component cracked |2.3.1| | 2 |
| Front Stop lamp not working |4.3.1 |a| |ii|| | 1 |
| Front Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Front Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
| Rear Drive chain excessively loose |6.2.1d| | 1 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
| Headlamp aim beam image kick up to the offside |1.6| | 1 |
| Rear suspension movement is excessively stiff |2.4.A.3b| | 1 |
| Nearside Rear Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
| Stop lamp affected by the operation of the horn |1.3.2| | 1 |
| Rear Brake disc|s| excessively pitted |3.2.A1l| | 1 |
| Rear Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
| Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Front suspension has inadequate damping effect. |2.3.6c| | 1 |
| Front wheel bearings have excessive free play |2.3.5b| | 1 |
| Front Front wheel bearings are excessively rough |2.3.5b| | 1 |
| Front position lamp missing |1.1.1a| | 1 |
| Front Brake lever has insufficient reserve travel |1.1.2 |a|| | 1 |
| Front Brake hose porous Brake reservoir pipe leaking |1.1.12 |e|| | 1 |
| Offside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
| Rear Rear reflector missing |4.8.2 |a| |ii|| | 1 |
| Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
| Front Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |
| Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
| Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Position lamp not working Front sidelight |4.2.1 |a|| | 1 |
| Front Stop lamp not working contro; (4.3.1 (a) (ii)) | 1 |
| Rear Stop lamp not working control (4.3.1 (a) (ii)) | 1 |
| Offside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
| Offside Headlamp aim beam image kick-up is to the offside |1.6.1| | 1 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Brake pedal anti-slip provision missing Rubber (1.1.2 (c)) | 1 |
| Front Brake fluid reservoir fluid level significantly below minimum level (1.1.10 (d) (ii)) | 1 |
| Rear Exhaust system insecure Tail pipe (6.1.2 (a)) | 1 |
| Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 1 |
| Front shock absorber seal failed and leaking oil both |2.3.3| | 1 |
| Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
| Nearside Front Brake disc contaminated |1.1.14 |b|| | 1 |
| Nearside Front Brake caliper leaking |1.1.16 |b| |i|| | 1 |
| Rear Brake pedal anti-slip provision missing |1.1.2 |c|| | 1 |
| Rear Decelerometer brake test indicates a binding brake |3.3.E1d| | 1 |
| Nearside Rear Direction indicator insecure |1.5.3b| | 1 |
| Stop lamp does not illuminate immediately a brake applies On rear brake |1.3.1a| | 1 |
| Nearside Handlebar mounting excessively deteriorated |flexible type| |2.1.1d| | 1 |
| Rear Brake disc|s| cracked |3.2.A1g| | 1 |
| Front Brake lever cannot be applied smoothly |3.1.3d| | 1 |
| Front Brake excessively binding |1.2.1 |f|| | 1 |
| Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
| Throttle control functioning such that safe operation of the motorcycle is adversely affected |6.2.7 |a| |ii|| | 1 |
| Throttle operating incorrectly |6.2.1f| | 1 |
| Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
| Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Front Front suspension fouling which affects the movement of the front suspension. |2.3.6a| | 1 |
| Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
| Front Steering control has Insufficient clearance at full lock affecting the riders operation of the controls |2.1.2b| | 1 |
| All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
| Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
| Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
| Centre Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Steering movement excessively rough with the weight on the lower bearing |2.2.1a| | 1 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
| Drive chain excessively tight (6.1.7 (k) (i)) | 1 |
| Brake lever attachment screws loose |3.1.2b| | 1 |
| Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
| Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
| Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
| Offside Handlebar deformed |2.1.1b| | 1 |
| Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
| Offside Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Front Headlamp not working on main beam |4.1.1 |a| |ii|| | 1 |
| Drive chain worn to excess |6.2.1e| | 1 |
| Headlamp incorrect colour |1.2.1| | 1 |
| Steering control handlebar movement restricted by cables caught on a projection |2.1.2c| | 1 |
| Headlamp deteriorated and function impaired |1.2.3a| | 1 |
| Position lamp switch insecure |1.1.4b| | 1 |
| Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Front Direction indicators not working |1.5.1c| | 1 |
| Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Rear Brake back plate|s| securing bolt|s| loose |3.2.A1j| | 1 |