>

MOT History from tests of petrol SUZUKI GSX600s year 1992

Review the list of common SUZUKI GSX600 failures below or to perform a specific mot history check on your SUZUKI then use our popular KnowYourCar service

mot history
Pass percent:68.70%
(The average a petrol SUZUKI GSX600 year 1992 passes without issue)
Based on:1,048 MOT Tests
Most common failuresNo# failures
Headlamp aim out of alignment39
Front Roller brake test indicates a binding brake |3.3.A1a|28
Front position lamp does not illuminate immediately when switched on |1.1.3a|27
Rear reflector on motorcycle missing |1.4.1|19
Drive chain excessively loose |6.2.1d|17
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a|15
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a|14
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a|13
Registration plate issues12
Rear Roller brake test indicates a binding brake |3.3.A1a|11
Nearside Front shock absorber seal failed and leaking oil |2.3.3|11
Exhaust is leaking and excessively noisey |7.1.1b|11
Stop lamp does not illuminate immediately a brake applies |1.3.1a|10
Steering movement excessively `notchy` with the wheel raised |2.2.1b|9
Steering headbearing has excessive free play |2.2.2|9
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b|8
Drive chain worn to excess |6.2.1e|8
Offside Front shock absorber seal failed and leaking oil |2.3.3|8
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||7
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4|7
Rear Brake disc|s| excessively scored |3.2.A1l|7
Horn not working |1.7.3a|6
Front Roller brake test indicates a sticking brake |3.3.A1a|6
Front wheel bearings have excessive free play |2.3.5b|6
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a|6
Rear Drive chain sprocket worn to excess |6.2.1e|5
Direction indicators not working |1.5.1c|5
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d|5
Wheel alignment incorrect which adversely affects the handling |2.5.1|4
Rear Drive chain excessively loose |6.2.1d|4
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d|4
Front shock absorber seal failed and leaking oil |2.3.3|4
Offside Front Direction indicator not working |1.5.1c|4
Offside Front Front shock absorber seal failed and leaking oil |2.3.3|3
Brake locking device missing |3.2.A1e|3
Exhaust mounting does not fully support the exhaust system |7.1.1.c|3
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3|3
Front wheel bearings are excessively rough |2.3.5b|3
Front Wheel has an excessively distorted bead rim. |4.2.2|3
Headlamp at least one does not illuminate on main beam |1.2.2a|ii||3
Rear Brake locking device missing |3.2.A1e|3
Nearside Front Direction indicators not working |1.5.1c|3
Drive chain excessively tight |6.2.1d|3
Registration plate lamp issues3
Front Brake disc|s| insecure |3.2.A1g|3
Front Steering movement excessively stiff with the weight on the lower bearing |2.2.1a|3
Headlamp aim beam image kick up to the offside |1.6|3
Rear Wheel alignment incorrect which adversely affects the handling |2.5.1|3
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a|3
Rear Floor brake test indicates a sticking brake |3.3.C2c|3
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b|3
Horn not loud enough to be heard by another road user |1.7.3a|3
Rear Floor brake test indicates a binding brake |3.3.C2c|3
Rear Rear reflector on motorcycle missing |1.4.1|3
Steering movement excessively stiff with the weight on the lower bearing |2.2.1a|3
Brake pedal has inadequate reserve travel |3.1.3b|3
Headlamp aim not tested |1.6|2
Front Front wheel bearings have excessive free play |2.3.5b|2
Rear suspension bush has excessive free play |2.4.A2a|i||2
Rear Brake reaction bracket insecure |3.2.A1j|2
Nearside Front Shock absorber has a serious fluid leak |5.3.2 |b||2
Offside Front Brake disc|s| insecure |3.2.A1g|2
Stop lamp remains on when the brake is released |1.3.1e|2
Exhaust has a major leak of exhaust gases |6.1.2 |a||2
Front suspension has inadequate damping effect. |2.3.6c|2
Front Exhaust is leaking and excessively noisey |7.1.1b|2
Fuel tank leaking |7.2.1a|2
Front Steering movement excessively `notchy` with the wheel raised |2.2.1b|2
Throttle operating incorrectly |6.2.1f|2
Drive chain sprocket carrier worn to excess |6.2.1e|2
Centre Rear Rear reflector on motorcycle missing |1.4.1|2
Centre Exhaust is leaking and excessively noisey |7.1.1b|2
Front Brake disc|s| has excessive run out |3.2.A1m|2
Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c|2
Front Floor brake test indicates a sticking brake |3.3.C2c|2
Nearside Front suspension assembly component cracked |2.3.1|2
Nearside Rear Direction indicator not working |1.5.1c|2
Nearside Front Brake disc|s| excessively worn |3.2.A1l|2
Offside Front Brake disc|s| excessively worn |3.2.A1l|2
Fairings insecure and likely to impede the steering |2.1.2e|2
Fuel system component leaking |7.2.1a|2
Rear Roller brake test indicates a sticking brake |3.3.A1a|2
Riders seat insecure |6.2.1a|2
Upper Rear mono-shock pivot excessively worn |2.4.B.4|2
Rear Drive chain worn to excess |6.2.1e|2
Front Steering headbearing has excessive free play |2.2.2|2
Rear mono-shock pivot seized |2.4.B.4|2
Rear Rear suspension bush has excessive free play |2.4.A2a|i||2
Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c|2
Front Brake excessively binding |1.2.1 |f||2
Front Floor brake test indicates a binding brake |3.3.C2c|2
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k|2
Offside Rear Direction indicator not working |1.5.1c|2
Front Direction indicator flashing less than 60 times a minute |1.5.1c|1
Rear Direction indicator flashing less than 60 times a minute |1.5.1c|1
Front Brake lever is damaged and the brake cannot be readily applied |3.1.3c|1
Offside Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k|1
Nearside Rear Brake reaction bracket securing bolt|s| missing |3.2.A1j|1
Front Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h|1
Front Brake master cylinder fluid level dangerously low |3.2.B1d|1
Rear Brake reaction bracket securing bolt|s| missing |3.2.A1j|1
Rear Brake cylinder leaking hydraulic fluid Caliper is leaking fluid!! |3.2.B1e|1
Throttle has a significant change in engine speed whilst moving the steering from lock to lock (2.1.4)1
Offside Direction indicator not working (1.5.1c)1
Exhaust is leaking and excessively noisey (7.1.1b)1
Drive chain excessively loose (6.2.1d)1
Rear reflector on motorcycle missing (1.4.1)1
Rear Position lamp not working no rear light (4.2.1 (a))1
Front Shock absorber has negligible damping effect no damping on front forks (5.3.2 (b))1
Front Brake disc significantly and obviously worn bobbins are worn excessivly (1.1.14 (a) (i))1
Rear Drive chain excessively loose rear chain worn and loose (6.1.7 (c) (i))1
Front Brake master cylinder defective but brake still operating master cylinder is stiff and notchy (1.1.10 (b) (i))1
Rear Brake has no recorded effort at a wheel rear brake does not work (1.2.1 (a) (ii))1
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i))1
Front Upper Headlamp damaged and function impaired |1.2.3a|1
Rear Shock absorber has negligible damping effect |5.3.2 |b||1
Drive chain worn to excess |6.1.7 |c| |i||1
Rear Drive chain sprocket so worn it is likely to fail |6.1.7 |c| |ii||1
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c|1
Rear Front suspension has inadequate damping effect. |2.3.6c|1
Brake reaction bracket securing bolt|s| loose |3.2.A1j|1
Rear mono-shock pivot excessively worn |2.4.B.4|1
Front Headlamp light source and lamp not compatible |4.1.4 |c||1
Horn not working (7.7 (a) (ii))1
Horn not working |7.7 |a| |ii||1
Rear reflector missing |4.8.2 |a| |ii||1
Front All position lamps do not illuminate immediately when switched on |1.1.3a|1
Rear Brake disc|s| has excessive run out |3.2.A1m|1
Front Brake disc|s| securing bolt|s| loose |3.2.A1g|1
Front Steering movement excessively stiff with the wheel raised |2.2.1b|1
Front Headlamp aim headlamp deteriorated and function impaired |1.2.3a|1
Headlamp missing |1.2.3a|1
Rear Rear suspension has a modification which reduces the strength of a load bearing member or its supporting structure. |2.4.A.2d|1
Front Front mudguard insecure |2.3.7|1
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||1
Fuel pipe leaking |7.2.1a|1
Nearside Rear All direction indicators light intensity significantly reduced (4.4.3 (a))1
Nearside Front Upper Indicator switch does not operate the direction indicators on the side selected |1.5.4|1
Rear Wheel spindle locking device missing (5.2.1 (d))1
Offside Front Brake caliper leaking (1.1.16 (b) (i))1
Nearside Front Upper Motorcycle structure excessively damaged |6.1.1a|1
Drive chain sprocket excessively loose |6.1.7 |c| |i||1
Offside Front Brake component worn and seriously reduced in strength |3.2.A1|1
Rear Rear reflector missing |4.8.2 |a| |ii||1
Rear shock absorber insecurely mounted |2.4.A.3b|1
Front Plate brake test indicates a binding brake |3.3.B1a|1
Front Exhaust has part of the system missing |7.1.1a|1
Front Front suspension has inadequate damping effect. |2.3.6c|1
Centre Front Steering movement excessively `notchy` with the wheel raised |2.2.1b|1
Nearside Rear Drive chain excessively tight |6.2.1d|1
Centre Front Steering headbearing has excessive free play |2.2.2|1
Offside Rear Drive chain excessively loose |6.2.1d|1
Offside Rear Drive chain worn to excess |6.2.1e|1
Front Brake pedal cannot be released smoothly |3.1.3d|1
Direction indicators affected by the operation of another lamp |1.5.1c|1
Front Hydraulic brake control feels spongy |3.1.4a|1
Exhaust excessively deteriorated |7.1.1a|1
Offside Front Direction indicator damaged and function impaired |1.5.3a|1
Front Stop lamp remains on when the brake is released |1.3.1e|1
Rear Brake fluid reservoir fluid level dangerously low |3.2.B1d|1
Seat insecure |6.2.1a|1
Rear wheel bearings have excessive free play |2.4.A.2c|1
Steering control handlebar movement restricted by taut cables |2.1.2c|1
Stop lamp affected by the operation of another lamp |1.3.2|1
Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h|1
Brake component worn and seriously reduced in strength |3.2.A1|1
Front Front wheel spindle securing nut locking device missing |2.3.3a|1
Offside Handlebar deformed |2.1.1b|1
Nearside Front Roller brake test indicates a binding brake |3.3.A1a|1
Rear suspension movement is excessively stiff |2.4.A.3b|1
Front position lamp missing |1.1.1a|1
Front position lamp insecure |1.1.1c|1
Clutch lever shortened so it cannot be readily operated. |6.2.1g|1
Rear Brake reaction bracket insecure split pin missing |3.2.A1j|1
Exhaust markings indicating not for road use or similar wording |7.1.4|1
Rear suspension fouling which affects the movement of the rear suspension |2.4.A.3a|1
Centre Front Lower Front suspension has inadequate damping effect. |2.3.6c|1
Centre Front Upper Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||1
Front Front wheel bearings are excessively rough |2.3.5b|1
Front Brake pipe likely to be fouled or trapped by moving parts |3.2.B2c|1
Offside Rear Direction indicator incorrect colour |1.5.1b|1
Fuel pipe union leaking |7.2.1a|1
Front Front position lamp deteriorated and function impaired |1.1.1b|1
Rear Drive belt sprocket worn to excess |6.2.1e|1
Offside Front Brake disc|s| is excessively distorted |3.2.A1m|1
Offside Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h|1
Front Front position lamp does not illuminate immediately when switched on |1.1.3a|1
Front Front position lamp damaged and function impaired |1.1.1b|1
Steering lock stop maladjusted |2.1.3|1
Rear Exhaust is leaking and excessively noisey |7.1.1b|1
Front Steering damper in such a condition that the steering action is impaired. |2.1.2d|1
Rear Suspension component pin or bush excessively worn |5.3.4 |a| |i||1
Rear Stop lamp not working |4.3.1 |a| |ii||1
Offside Direction indicator flashing more than 120 times per minute |1.5.1c|1
Centre Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||1
Centre Front Front shock absorber seal failed and leaking oil |2.3.3|1
Rear Brake disc|s| cracked |3.2.A1g|1
Brake component has an inadequate repair |3.1.5|1
Front Brake lever pivots excessively worn |3.1.3a|1
Front Brake lever cracked |3.1.2c|1
Front Front position lamp insecure |1.1.1c|1
Nearside Direction indicator not working |1.5.1c|1
Front Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a|1
Nearside Front Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h|1
Offside Front Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h|1
Offside Handlebar handgrip not secure to handlebars. |2.1.1c|1
Fuel cap missing |7.2.2a|1
Direction indicators flashing more than 120 times per minute |1.5.1c|1
Nearside Steering control handlebar movement restricted by taut cables |2.1.2c|1
Offside Steering control handlebar movement restricted by trapped cables |2.1.2c|1
Upper Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c|1
Headlamp dipped beam affected by the operation of another lamp |1.2.2c|1
All position lamps do not illuminate immediately when switched on |1.1.3a|1
Nearside Rear Direction indicators not working |1.5.1c|1
Front Position lamp not working (4.2.1 (a))1
Steering headbearing excessively stiff or notchy steering stiff (2.2.2 (f) (i))1
Front Valve stem seriously damaged split (5.2.3 (j))1
Rear Brake fluid reservoir insecurely mounted |3.2.B1a|1
Nearside Front Direction indicator incorrect colour |1.5.1b|1
Front An item not tested |Manual|1
Offside Rear Footrest missing |6.2.1a|1
Front Direction indicator incorrect colour |1.5.1b|1
Lower Rear mono-shock pivot excessively worn |2.4.B.4|1
Offside Front Brake pipe union leaking fluid |3.2.B4|1
Front Brake lever cannot be applied smoothly |3.1.3d|1
Rear reflector on motorcycle deteriorated and function impaired |1.4.2a|1
Front Front position lamp missing |1.1.1a|1
Rear Rear suspension fouling which affects the movement of the rear suspension |2.4.A.3a|1
Offside Front Direction indicator insecure |1.5.3b|1
Front Brake lever has inadequate reserve travel |3.1.3b|1
Front Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c|1
Fuel system component leaking carb leaking |6.1.3 |b| |i||1
Indicator tell tale not functioning |1.5.2|1
Nearside Front Direction indicator not working |1.5.1c|1
Front Headlamp aim beam image kick up to the offside |1.6|1
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b|1
Centre Rear suspension bush has excessive free play |2.4.A2a|i||1
Rear Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h|1
Rear Brake component worn and seriously reduced in strength |3.2.A1|1
Nearside Drive chain excessively loose |6.2.1d|1
Nearside Drive chain worn to excess |6.2.1e|1
Nearside Rear Direction indicator not working |4.4.1 |a| |ii||1
Offside Rear Direction indicator not working |4.4.1 |a| |ii||1
Nearside Front Direction indicator incorrect colour |4.4.3 |a||1
Offside Front Direction indicator incorrect colour |4.4.3 |a||1
Offside Front Shock absorber has a serious fluid leak |5.3.2 |b||1
Brake linkage clevis joint excessively worn both on rear tie bar |3.2.A1d|1
Steering lock stop ineffective both |2.1.3|1
Rear Brake hose which buldges |3.2.B4|1
Rear Brake disc|s| excessively worn |3.2.A1l|1
Nearside Rear Rear wheel rotation likely to be impeded |6.2.1b|1
Rear All position lamps do not illuminate immediately when switched on |1.1.3a|1
Offside Rear wheel spindle securing nut locking device insecure |2.4.A.2b|1
Front Handlebar deformed |2.1.1b|1
Offside Rear Motorcycle structure excessively damaged |6.1.1a|1
Lower Rear suspension component loose |2.4.A.1a|1
Front Steering headbearing excessively stiff or notchy (2.2.2 (f) (i))1
All direction indicators incorrect colour All four indicators showing white light. (4.4.3 (a))1
Front Brake master cylinder defective but brake still operating Brake lever actuation is not smooth (ratcheting action) (1.1.10 (b) (i))1
Rear Wheel alignment incorrect which adversely affects the handling (2.4 (a))1
Nearside Front Floor brake test indicates a binding brake |3.3.C2c|1
Offside Front Floor brake test indicates a binding brake |3.3.C2c|1
Front Brake component leaking fluid |3.2.B4|1
Rear Hydraulic brake control feels spongy |3.1.4a|1
Rear Roller brake test indicates a severely juddering brake |3.3.A1b|1
Front Brake disc|s| is excessively distorted |3.2.A1m|1
Nearside Front Brake cylinder severely corroded |3.2.B1b|1
Offside Front Brake cylinder severely corroded |3.2.B1b|1
Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h|1
Rear Lower Rear suspension bearing has excessive free play |2.4.A2a|i||1
Rear wheel spindle securing nut locking device missing |2.4.A.2b|1
Offside Rear Direction indicators not working |1.5.1c|1
Rear Brake pedal has inadequate reserve travel |3.1.3b|1
Nearside Front Lower Brake disc|s| insecure |3.2.A1g|1
Offside Front Lower Brake disc|s| insecure |3.2.A1g|1
Brake reaction bracket securing bolt|s| loose split pin missing |3.2.A1j|1
Front Horn is not continous or uniform |1.7.3c|1
Front Brake disc|s| excessively worn |3.2.A1l|1
Front All position lamps not working (4.2.1 (a))1
Front Brake lever attachment screws loose |3.1.2b|1
Nearside Front Direction indicator damaged and function impaired |1.5.3a|1
Dipswitch does not deflect the main beam/s, making them into dipped beam/s |1.2.2b|ii||1
Offside Brake disc|s| insecure |3.2.A1g|1
Clutch lever positioned so it cannot be readily operated. |6.2.1g|1
Rear Brake pedal is inoperative |3.1.3c|1
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a))1
Shock absorber has a serious fluid leak Both (5.3.2 (b))1
Steering headbearing excessively stiff or notchy (2.2.2 (f) (i))1
Rear Brake rod insecure Adjusting nut (1.1.15 (c))1
Offside Front Footrest insecure (6.2.12 (a))1
Exhaust silencer likely to become detached Restricting swing arm movements (8.1.1 (b) (ii))1
Rear brake disc in such a condition that it is seriously weakened1
Front Wheel damaged or distorted to the extent that control of the motorcycle is likely to be adversely affected (5.2.2 (c) (ii))1
Rear Brake excessively binding (1.2.1 (f))1
Rear wheel spindle loose |2.4.A.2b|1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Find us on Facebook

© KnowYourCar™ 2019. All rights reserved
Except where otherwise noted, content on our MOT statistics pages are licensed under a Creative Commons Attribution 4.0 International license.
You are free to redistribute the material in any medium or format as long as credit is given to KnowYourCar

WARNING: We have placed hidden watermarks in our data. We will take action against our data being used outside of these terms.

MOT Data licensed under the Open Government Licence v3.0

By using our site you are agreeing to our terms and conditions
Terms & Conditions  Privacy Policy