| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 17 |
| Rear reflector on motorcycle missing |1.4.1| | 16 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 16 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 14 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 13 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 12 |
| Registration plate issues | 12 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 11 |
| Steering headbearing has excessive free play |2.2.2| | 10 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 10 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 8 |
| Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 8 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 7 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 6 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 5 |
| Drive chain worn to excess |6.2.1e| | 5 |
| Wheel alignment incorrect which adversely affects the handling |2.5.1| | 5 |
| Horn not working |1.7.3a| | 4 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 4 |
| Nearside Front Brake disc|s| excessively worn |3.2.A1l| | 4 |
| Offside Front Brake disc|s| excessively worn |3.2.A1l| | 4 |
| Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 4 |
| Rear suspension bush has excessive free play |2.4.A2a|i|| | 4 |
| Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 3 |
| Offside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 3 |
| Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 3 |
| Front wheel bearings are excessively rough |2.3.5b| | 3 |
| Drive chain excessively tight |6.2.1d| | 3 |
| Rear Rear reflector on motorcycle missing |1.4.1| | 3 |
| Throttle operating incorrectly |6.2.1f| | 3 |
| Rear Brake disc|s| excessively worn |3.2.A1l| | 3 |
| Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 3 |
| Drive chain excessively loose |6.2.1d| | 3 |
| Front Floor brake test indicates a binding brake |3.3.C2c| | 3 |
| Rear Brake locking device missing |3.2.A1e| | 3 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 3 |
| Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 3 |
| Chain guard fouling another component |6.2.1c| | 3 |
| Registration plate lamp issues | 2 |
| Offside Rear Direction indicator not working |1.5.1c| | 2 |
| Clutch lever bent so it cannot be readily operated. |6.2.1g| | 2 |
| Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 2 |
| Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
| Rear Drive chain sprocket worn to excess |6.2.1e| | 2 |
| Horn not loud enough to be heard by another road user |1.7.3a| | 2 |
| Offside Rear Direction indicators not working |1.5.1c| | 2 |
| Indicator tell tale not functioning |1.5.2| | 2 |
| Front Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 2 |
| Nearside Steering lock stop ineffective |2.1.3| | 2 |
| Rear reflector missing (4.8.2 (a) (ii)) | 2 |
| Brake lever has inadequate reserve travel |3.1.3b| | 2 |
| Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
| Rear Rear suspension bush has excessive free play |2.4.A2a|i|| | 2 |
| Rear Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
| Front Brake lever has inadequate reserve travel |3.1.3b| | 2 |
| Rear Roller brake test indicates a sticking brake |3.3.A1a| | 2 |
| Front Hydraulic brake control feels spongy |3.1.4a| | 2 |
| Offside Front Direction indicator not working |1.5.1c| | 2 |
| Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
| Rear Brake disc|s| excessively scored |3.2.A1l| | 2 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
| Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
| Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 2 |
| Exhaust excessively deteriorated |7.1.1a| | 2 |
| Rear Brake disc|s| has excessive run out |3.2.A1m| | 2 |
| Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 2 |
| Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 2 |
| Direction indicators flashing less than 60 times a minute |1.5.1c| | 2 |
| Brake pedal has inadequate reserve travel |3.1.3b| | 2 |
| Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 2 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
| Offside Rear Brake locking device missing |3.2.A1e| | 2 |
| Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 2 |
| Front wheel bearings have excessive free play |2.3.5b| | 1 |
| Horn control not functioning. |1.7.2b| | 1 |
| Rear Drive chain worn to excess |6.1.7 |c| |i|| | 1 |
| Rear Drive chain sprocket worn to excess |6.1.7 |c| |i|| | 1 |
| Rear Rear reflector missing |4.8.2 |a| |ii|| | 1 |
| Nearside Front Direction indicator not working |4.4.1 |a| |ii|| | 1 |
| Front Position lamp not working |4.2.1 |a|| | 1 |
| Stop lamp not working Front brake light |4.3.1 |a| |ii|| | 1 |
| Front Shock absorber has a serious fluid leak Both fork legs leaking oil |5.3.2 |b|| | 1 |
| Rear Pillion seat insecure |6.2.6 |a| |ii|| | 1 |
| Headlamp aim beam image kick-up is to the offside |1.6.1| | 1 |
| Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
| Front suspension assembly component loose leaking oil from lower fork |2.3.1| | 1 |
| Front Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
| Rear suspension movement is excessively stiff |2.4.A.3b| | 1 |
| Direction indicator missing |1.5.1a| | 1 |
| Centre Lower Rear shock absorber insecurely mounted |2.4.A.3b| | 1 |
| Front position lamp incorrect colour |1.1.2a| | 1 |
| Front wheel spindle securing nut locking device missing Fork pinch bolt missing! |2.3.5a| | 1 |
| Rear Footrest missing Pillion footrests missing! |6.2.1a| | 1 |
| Rear position lamp insecure |1.1.1c| | 1 |
| Offside Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
| Drive chain sprocket worn to excess both |6.2.1e| | 1 |
| Rear Brake disc|s| excessively pitted |3.2.A1l| | 1 |
| Rear Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
| Front Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
| Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Front Brake fluid contaminated |1.8 |a|| | 1 |
| Front position lamp insecure |1.1.1c| | 1 |
| Horn sounds harsh or grating |1.7.3c| | 1 |
| Rear wheel bearings are excessively rough |2.4.A.2c| | 1 |
| Headlamp aim beam image kick up to the offside |1.6| | 1 |
| Fuel system component leaking |7.2.1a| | 1 |
| Front Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
| Rear Drive chain excessively tight |6.2.1d| | 1 |
| Offside Steering lock stop ineffective |2.1.3| | 1 |
| Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 1 |
| Rear Drive chain sprocket so worn it is likely to fail (6.1.7 (c) (ii)) | 1 |
| Drive chain excessively loose (6.1.7 (c) (i)) | 1 |
| Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
| Nearside Front Brake disc|s| excessively scored |3.2.A1l| | 1 |
| Offside Front Brake disc|s| excessively scored |3.2.A1l| | 1 |
| Nearside Front Brake disc|s| excessively pitted |3.2.A1l| | 1 |
| Offside Front Brake disc|s| excessively pitted |3.2.A1l| | 1 |
| Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
| Position lamp switch insecure |1.1.4b| | 1 |
| Front Direction indicator incorrect colour |1.5.1b| | 1 |
| Rear Brake reaction bracket insecure |3.2.A1j| | 1 |
| Lower Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Brake excessively binding |1.2.1 |f|| | 1 |
| Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 1 |
| Offside Direction indicator not working |1.5.1c| | 1 |
| Rear Floor brake test indicates a binding brake |3.3.C2c| | 1 |
| Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
| Rear Brake disc|s| cracked |3.2.A1g| | 1 |
| Brake locking device missing |3.2.A1e| | 1 |
| Inner Rear Lower Rear wheel has a loose wheel nut|s| |4.2.3a| | 1 |
| Offside Front Lower Headlamp aim beam image kick up to the offside |1.6| | 1 |
| Offside Upper Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
| Nearside Front Lower Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
| Nearside Direction indicators not working |1.5.1c| | 1 |
| Offside Direction indicators not working |1.5.1c| | 1 |
| Nearside Rear Direction indicator insecure |1.5.3b| | 1 |
| Front Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
| Nearside Front Brake disc|s| insecure |3.2.A1g| | 1 |
| Offside Front Brake disc|s| insecure |3.2.A1g| | 1 |
| Front Lower Steering headbearing has excessive free play |2.2.2| | 1 |
| Indicator switch insecure |1.5.4| | 1 |
| Front Steering headbearing has excessive free play |2.2.2| | 1 |
| Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
| Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
| Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |
| Front Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
| Rear Lower Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
| Brake lever has inadequate reserve travel spongy |3.1.3b| | 1 |
| Nearside Front suspension assembly component cracked |2.3.1| | 1 |
| Centre Rear Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
| Exhaust mounting missing |7.1.1c| | 1 |
| Exhaust markings indicating not for road use or similar wording |7.1.4| | 1 |
| Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Stop lamp does not emit a steady light |1.3.1b| | 1 |
| Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
| Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
| Throttle operating incorrectly (6.2.7 (a) (i)) | 1 |
| Centre Front Lower Front suspension has inadequate damping effect. |2.3.6c| | 1 |
| Centre Front Upper Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
| Centre Rear Lower Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Nearside Handlebar deformed |2.1.1b| | 1 |
| Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
| Offside Front Brake caliper leaking and braking performance affected (1.1.16 (b) (ii)) | 1 |
| Brake performance unable to be tested (1.2.1 (g)) | 1 |
| Central Rear Lower Suspension component pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
| Nearside Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
| Rear Brake disc|s| securing bolt|s| missing |3.2.A1g| | 1 |
| Offside Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| An item not tested |Manual| | 1 |
| Front Brake performance not tested |3.3| | 1 |
| Rear Brake performance not tested |3.3| | 1 |
| Rear Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Offside Front Brake lever pivots excessively worn |3.1.3a| | 1 |
| Rear Front suspension has inadequate damping effect. |2.3.6c| | 1 |
| Centre Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Nearside Rear Footrest missing |6.2.1a| | 1 |
| Throttle control functioning such that safe operation of the motorcycle is adversely affected |6.2.7 |a| |ii|| | 1 |
| Rear Drive chain excessively loose |6.2.1d| | 1 |
| Rear Roller brake test indicates a severely juddering brake |3.3.A1b| | 1 |
| Rear Drive chain worn to excess |6.2.1e| | 1 |
| Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
| Nearside Direction indicator not working |1.5.1c| | 1 |
| Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Steering control handlebar movement restricted by taut cables |2.1.2c| | 1 |
| Nearside Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Offside Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Front Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
| Rear Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
| Centre Front Lower Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Nearside Rear Exhaust mounting missing |7.1.1c| | 1 |
| Centre Lower Exhaust excessively deteriorated |7.1.1a| | 1 |
| Rear mono-shock pivot seized |2.4.B.4| | 1 |
| Nearside Front Brake hose stretched by steering movement |3.2.B3b| | 1 |
| Front Roller brake test indicates a severely juddering brake |3.3.A1b| | 1 |
| Offside Rear Footrest insecure |6.2.1a| | 1 |
| Front Brake pipe inadequately supported |3.2.B2b| | 1 |
| Offside Front Brake locking device missing |3.2.A1e| | 1 |
| Rear Brake master cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
| Rear Brake caliper|s| securing bolt|s| loose |3.2.A1j| | 1 |
| Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
| Nearside Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
| Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 1 |
| Rear Brake reaction bracket securing bolt|s| missing |3.2.A1j| | 1 |
| Front Brake master cylinder insecurely mounted |3.2.B1a| | 1 |
| Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
| Rear Rear wheel rotation likely to be impeded |6.2.1b| | 1 |
| Drive chain fouling another component |6.2.1d| | 1 |
| Chain guard insecure |6.2.1c| | 1 |
| Inner Rear Lower Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
| Rear Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
| Direction indicators not working |1.5.1c| | 1 |
| Drive chain excessively tight (6.1.7 (k) (i)) | 1 |
| Rear Wheel alignment incorrect which adversely affects the handling (2.4 (a)) | 1 |
| Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
| Nearside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
| Front Front wheel bearings are excessively rough |2.3.5b| | 1 |
| Upper Exhaust has part of the system missing |7.1.1a| | 1 |
| Front position lamp missing |1.1.1a| | 1 |
| Nearside Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |