Most common failures | No# failures |
---|
Headlamp aim out of alignment | 13 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Registration plate issues | 3 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 3 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 3 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 2 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 2 |
Rear suspension bearing has excessive free play |2.4.A2a|i|| | 2 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 2 |
Drive chain excessively loose |6.2.1d| | 2 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 2 |
Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Horn not working |1.7.3a| | 2 |
Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 2 |
Nearside Footrest insecure |6.2.1a| | 2 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 2 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Rear Wheel alignment incorrect which adversely affects the steering |2.5.1| | 2 |
Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
Steering headbearing has excessive free play |2.2.2| | 1 |
Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Front wheel spindle securing nut locking device missing |2.3.3a| | 1 |
Nearside Front Direction indicator not working |1.5.1c| | 1 |
Rear Exhaust system insecure end can bolt loose |nut missing | |6.1.2 |a|| | 1 |
Rear reflector missing |4.8.2 |a| |ii|| | 1 |
Nearside Front Footrest insecure loose bolt |6.2.12 |a|| | 1 |
Throttle operating incorrectly sticking |6.2.7 |a| |i|| | 1 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
Rear Brake linkage has abnormal movement due to maladjustment |3.2.A1i| | 1 |
An item not tested |Manual| | 1 |
Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Brake fluid reservoir leaking hydraulic fluid |3.2.B1e| | 1 |
Rear Brake locking device missing |3.2.A1e| | 1 |
Rear Brake locking device insecure |3.2.A1e| | 1 |
Front position lamp insecure |1.1.1c| | 1 |
Front position lamp incorrect colour |1.1.2a| | 1 |
Front Direction indicator not working |1.5.1c| | 1 |
Rear Direction indicator not working |1.5.1c| | 1 |
Exhaust mounting missing |7.1.1c| | 1 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Nearside Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Centre Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Centre Rear Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Offside Rear Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Offside Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Front Front mudguard insecure |2.3.7| | 1 |
Front wheel has a loose wheel nut|s| |4.2.3a| | 1 |
Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Exhaust excessively deteriorated |7.1.1a| | 1 |
Nearside Rear Drive chain excessively tight |6.2.1d| | 1 |
Nearside Rear Drive chain excessively loose |6.2.1d| | 1 |
Nearside Front Brake caliper|s| securing bolt|s| loose |3.2.A1j| | 1 |
Front Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 1 |
Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
Direction indicator not working |1.5.1c| | 1 |
Handlebar mounting insecure (2.2.1 (a) (i)) | 1 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Drive chain worn to excess |6.2.1e| | 1 |
Front Headlamp aim beam image kick up to the offside |1.6| | 1 |
Headlamp aim beam image kick up to the offside |1.6| | 1 |
Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
Rear Sidecar rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Front Steering headbearing has excessive free play |2.2.2| | 1 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Rear Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Front Brake component has an inadequate repair |3.1.5| | 1 |
Rear Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Rear Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Rear suspension has corrosion which reduces the strength of a load bearing member or its supporting structure. |2.4.A.2d| | 1 |
Front Wheel has an excessively eccentric bead rim. |4.2.2| | 1 |
Stop lamp remains on when the brakes are released | 1 |
Indicator switch defective |1.5.4| | 1 |
Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Rear suspension component excessively corroded. |2.4.A.1a| | 1 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Chain guard insecure |6.2.1c| | 1 |
Horn sound not in accordance with requirements (7.7 (c)) | 1 |
Motorcycle structure excessively corroded |6.1.1a| | 1 |
Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Stop lamp does not emit a steady light |1.3.1b| | 1 |
Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
Headlamp aim not tested |1.6| | 1 |
Offside Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
Fuel system component leaking |7.2.1a| | 1 |
Front Brake lever attachment screws loose |3.1.2b| | 1 |
Front wheel bearings have excessive free play |2.3.5b| | 1 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Front Brake pipe union leaking fluid |3.2.B4| | 1 |
Headlamp main beam affected by the operation of another lamp |1.2.2c| | 1 |
Offside Front Upper Brake fluid reservoir leaking hydraulic fluid |3.2.B1e| | 1 |
Centre Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Nearside Front Brake locking device insecure |3.2.A1e| | 1 |