| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 72 |
| Registration plate issues | 35 |
| Front wheel bearings have excessive free play |2.3.5b| | 19 |
| Rear reflector on motorcycle missing |1.4.1| | 12 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 11 |
| Front wheel bearings are excessively rough |2.3.5b| | 11 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 9 |
| Horn not working |1.7.3a| | 8 |
| Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 6 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 6 |
| Registration plate lamp issues | 5 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 5 |
| Horn not working (7.7 (a) (ii)) | 5 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
| Rear reflector missing (4.8.2 (a) (ii)) | 5 |
| Front Front wheel bearings have excessive free play |2.3.5b| | 4 |
| Drive chain excessively loose |6.2.1d| | 4 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 4 |
| Nearside Front Direction indicator not working |1.5.1c| | 4 |
| Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 4 |
| Offside Rear Direction indicator not working |1.5.1c| | 3 |
| Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
| Nearside Rear Direction indicator not working |1.5.1c| | 3 |
| Headlamp not working on main beam (4.1.1 (a) (ii)) | 3 |
| Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 3 |
| Direction indicators flashing more than 120 times per minute |1.5.1c| | 3 |
| Drive chain excessively tight |6.2.1d| | 3 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
| Rear Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 3 |
| Rear Stop lamp not working (4.3.1 (a) (ii)) | 3 |
| Front Brake disc|s| has excessive run out |3.2.A1m| | 3 |
| Front Wheel bearing rough when rotated |5.1.3 |b| |i|| | 3 |
| Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 3 |
| Front Wheel bearing so rough it is likely to overheat or break up (5.1.3 (b) (ii)) | 3 |
| Nearside Front Direction indicator incorrect colour |1.5.1b| | 2 |
| Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 2 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 2 |
| Horn control not functioning. |1.7.2b| | 2 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 2 |
| Front Floor brake test indicates a binding brake |3.3.C2c| | 2 |
| Headlamp aim projected beam image obviously incorrect (4.1.2 (c)) | 2 |
| Steering headbearing has excessive free play |2.2.2| | 2 |
| Rear reflector missing |4.8.2 |a| |ii|| | 2 |
| Stop lamp remains on when the brakes are released | 2 |
| Exhaust markings indicating not for road use or similar wording |7.1.4| | 2 |
| Front Brake indicates excessive fluctuation of brake effort |1.2.1 |e|| | 2 |
| Front Front wheel bearings are excessively rough |2.3.5b| | 2 |
| Rear Brake disc|s| excessively worn |3.2.A1l| | 2 |
| Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 2 |
| Front Valve stem seriously damaged (5.2.3 (j)) | 2 |
| Rear Valve stem seriously damaged (5.2.3 (j)) | 2 |
| Rear position lamp incorrect colour |1.1.2b| | 2 |
| Stop lamp emits other than a steady red light |1.3.1b| | 2 |
| Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 2 |
| Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 2 |
| Front Brake disc significantly and obviously worn (1.1.14 (a) (i)) | 2 |
| Horn not working (7.7 (a)) | 2 |
| Rear Drive chain excessively loose |6.2.1d| | 1 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Brake pedal cannot be released smoothly |3.1.3d| | 1 |
| Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Rear Wheel bearing play so excessive that directional control is impaired (5.1.3 (a) (ii)) | 1 |
| Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Front Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
| Front Brake excessively binding (1.2.1 (f)) | 1 |
| Rear Stop lamp switch with a delay in operation (4.3.2 (a) (ii)) | 1 |
| Rear reflector on motorcycle deteriorated and function impaired |1.4.2a| | 1 |
| Rear Stop lamp emits other than a steady red light |1.3.1b| | 1 |
| Front Direction indicator with a multiple light source more than 1/2 not functioning |4.4.1 |a| |ii|| | 1 |
| Front Direction indicator light intensity significantly reduced |4.4.3 |a|| | 1 |
| Front Wheel bearing has excessive play |5.1.3 |a| |i|| | 1 |
| Rear Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
| Centre Front Lower Front wheel bearings have excessive free play |2.3.5b| | 1 |
| Rear position lamp incorrect colour rear light more white than red |1.1.2b| | 1 |
| Stop lamp emits other than a steady red light stoplight discoloured,more white than red |1.3.1b| | 1 |
| Front Brake fluid reservoir fluid level dangerously low no fluid appears to be in sight glass of front master cylinder |3.2.B1d| | 1 |
| Nearside Front Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
| Nearside Rear Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
| Front Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
| Front Front suspension assembly excessive wear or free play in a front suspension component |2.3.4| | 1 |
| Offside Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
| Offside Rear Direction indicator damaged and function impaired Over 50% of LED`s not working in unit |1.5.3a| | 1 |
| Rear Brake component leaking fluid |3.2.B4| | 1 |
| Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Front Brake disc|s| insecure |3.2.A1g| | 1 |
| Drive chain excessively tight (6.1.7 (k) (i)) | 1 |
| Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 1 |
| Stop lamp missing |1.3.3a| | 1 |
| Front Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
| Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Brake performance not tested |3.3| | 1 |
| Floor brake test No brake control achieves an efficiency of 30%. |3.3.C1a| | 1 |
| Floor brake test Neither brake control achieves an efficiency of 25% |3.3.C1b| | 1 |
| Throttle control functioning such that safe operation of the motorcycle is adversely affected (6.2.7 (a) (ii)) | 1 |
| Nearside Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |
| Rear Brake pedal is positioned so that the brake cannot be readily applied (1.1.2 (d)) | 1 |
| Rear Brake pedal not releasing correctly and functionality of brakes affected (1.1.2 (b) (ii)) | 1 |
| Rear Brake pedal pivot excessively tight (1.1.1 (a)) | 1 |
| Front Brake disc significantly and obviously worn Both discs (1.1.14 (a) (i)) | 1 |
| Offside Front Footrest insecure (6.2.12 (a)) | 1 |
| Nearside Rear All direction indicators obviously incorrectly positioned Not more than 180mm apart (4.4.3 (a)) | 1 |
| Offside Rear All direction indicators obviously incorrectly positioned Not more than 180mm apart (4.4.3 (a)) | 1 |
| Rear brake disc in such a condition that it is seriously weakened | 1 |
| Front Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
| Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
| Headlamp aim not tested |1.6| | 1 |
| Centre Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
| Drive chain worn to excess |6.2.1e| | 1 |
| Centre Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Offside Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Rear Stop lamp lens defective such that the emitted light is adversely affected (4.3.1 (b) (ii)) | 1 |
| Rear Stop lamp with a multiple light source more than 1/2 not functioning (4.3.1 (a) (ii)) | 1 |
| Nearside Steering lock stop ineffective |2.1.3| | 1 |
| Offside Steering lock stop ineffective |2.1.3| | 1 |
| Rear Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |
| Front Brake hose fouling |3.2.B3b| | 1 |
| Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Front Stop lamp showing white light to the rear (4.3.3 (a) (ii)) | 1 |
| Rear Stop lamp showing white light to the rear (4.3.3 (a) (ii)) | 1 |
| Position lamp showing white light to the rear (4.2.3 (a) (ii)) | 1 |
| Throttle control functioning such that safe operation of the motorcycle is adversely affected revs rise when on right lock (6.2.7 (a) (ii)) | 1 |
| Horn not working relay clicking (7.7 (a)) | 1 |
| Rear Position lamp showing white light to the rear (4.2.3 (a) (ii)) | 1 |
| Nearside Rear Direction indicator incorrect colour |1.5.1b| | 1 |
| Offside Rear Direction indicator incorrect colour |1.5.1b| | 1 |
| Front Brake fluid reservoir fluid level significantly below minimum level |1.1.10 |d| |ii|| | 1 |
| Rear Direction indicator adversely affected by the operation of another lamp Aftermarket Lamp unit |4.4.3 |b|| | 1 |
| Rear Position lamp adversely affected by the operation of another lamp |4.2.3 |b|| | 1 |
| Front Brake lever has insufficient reserve travel |1.1.2 |a|| | 1 |
| Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 1 |
| Offside Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Rear Brake hose excessively kinked |3.2.B3a| | 1 |
| Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
| Offside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Rear Direction indicator deteriorated and function impaired |1.5.3a| | 1 |
| Front Brake lever has insufficient reserve travel (1.1.2 (a)) | 1 |
| Rear Brake has no recorded effort at a wheel |1.2.1 |a| |ii|| | 1 |
| Front Wheel bearing play so excessive it is likely to break up (5.1.3 (a) (ii)) | 1 |
| Steering damper insecure |2.1.2d| | 1 |
| Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
| Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
| Rear Brake excessively binding (1.2.1 (f)) | 1 |
| Rear Stop lamp not working Front Brake switch not working (4.3.1 (a) (ii)) | 1 |
| Wheel bearing play so excessive it is likely to break up (5.1.3 (a) (ii)) | 1 |
| Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a)) | 1 |
| Riders seat insecure (6.2.5 (a) (ii)) | 1 |
| Offside Front Brake disc contaminated (1.1.14 (b)) | 1 |
| Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
| Brake pedal has insufficient reserve travel Rear brake pedal fouling on exhaust when applied. (1.1.2 (a)) | 1 |
| Centre Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Centre Front Headlamp aim not tested |1.6| | 1 |
| Nearside Rear Direction indicators not working |1.5.1c| | 1 |
| Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Fuel system component insecure fuel tank |7.2.1b| | 1 |
| Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
| Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
| Rear Stop lamp not working Adjusted. (4.3.1 (a) (ii)) | 1 |
| Offside Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
| Drive chain excessively loose (6.1.7 (c) (i)) | 1 |
| Stop lamp does not illuminate immediately a brake applies with control 2 |1.3.1a| | 1 |
| Rear wheel spindle securing nut|s| loose |2.4.A.2b| | 1 |
| Rear suspension component loose main bolt |2.4.A.1a| | 1 |
| Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
| Horn missing |1.7.1| | 1 |
| Rear Brake disc|s| has excessive run out |3.2.A1m| | 1 |
| Horn not working |7.7 |a| |ii|| | 1 |
| Nearside Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
| Rear reflector on sidecar missing |1.4.1| | 1 |
| Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition |8.1.1 |a|| | 1 |
| Front Riders seat insecure |6.2.1a| | 1 |
| Offside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
| Rear Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
| Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 1 |
| Nearside Front Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |
| Front Brake lever so insecure that the brake cannot be readily applied ball end missing >leaving sharp edge (1.1.2 (e) (ii)) | 1 |
| Front Brake fluid reservoir leaking hydraulic fluid |3.2.B1e| | 1 |
| Front Wheel bearing so rough it is likely to overheat or break up |5.1.3 |b| |ii|| | 1 |
| Upper Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Rear Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
| Rear Brake pedal cannot be released smoothly |3.1.3d| | 1 |
| Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Nearside Front Direction indicator not working |4.4.1 |a| |ii|| | 1 |
| Nearside Rear Direction indicator not working bulb replaced (4.4.1 (a) (ii)) | 1 |
| Throttle operating incorrectly |6.2.7 |a| |i|| | 1 |