Most common failures | No# failures |
---|
Headlamp aim out of alignment | 14 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 9 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 8 |
Rear reflector on motorcycle missing |1.4.1| | 8 |
Rear Rear reflector on motorcycle missing |1.4.1| | 5 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 5 |
Registration plate issues | 5 |
Horn not working |1.7.3a| | 5 |
Exhaust is leaking and excessively noisey |7.1.1b| | 4 |
Drive chain excessively loose |6.2.1d| | 4 |
Nearside Rear Direction indicators not working |1.5.1c| | 3 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 3 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 3 |
Offside Front Direction indicator not working |1.5.1c| | 3 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 3 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
Front position lamp missing |1.1.1a| | 2 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 2 |
Nearside Rear Footrest insecure |6.2.1a| | 2 |
Rear Brake disc|s| excessively scored |3.2.A1l| | 2 |
Rear Brake disc|s| excessively worn |3.2.A1l| | 2 |
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 2 |
Rear Drive chain excessively tight |6.2.1d| | 2 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
Front Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 2 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
Front Headlamp aim beam image kick up to the offside |1.6| | 2 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Headlamp aim beam image kick up to the offside |1.6| | 2 |
Rear Drive chain excessively loose |6.2.1d| | 2 |
Front Floor brake test indicates a sticking brake |3.3.C2c| | 2 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Rear suspension bearing has excessive free play |2.4.A2a|i|| | 2 |
Headlamp aim projected beam image obviously incorrect (4.1.2 (c)) | 1 |
Rear Suspension component pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
Offside Front Direction indicators not working |1.5.1c| | 1 |
Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
Front Roller brake test indicates a severely juddering brake |3.3.A1b| | 1 |
Rear suspension bush has excessive free play swing arm |2.4.A2a|i|| | 1 |
Nearside Rear Drive chain excessively loose |6.2.1d| | 1 |
Rear Rear wheel bearings are excessively rough |2.4.A.2c| | 1 |
Brake locking device missing |3.2.A1e| | 1 |
Clutch lever shortened so it cannot be readily operated. |6.2.1g| | 1 |
Seat insecure |6.2.1a| | 1 |
Offside Rear Footrest missing |6.2.1a| | 1 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Nearside Direction indicator incorrect colour |1.5.1b| | 1 |
Direction indicators flashing more than 120 times per minute all |1.5.1c| | 1 |
Rear Brake reaction bracket insecure |3.2.A1j| | 1 |
Nearside Rear Brake pipe inadequately clipped |3.6.B.1| | 1 |
Offside Rear Brake pipe inadequately clipped |3.6.B.1| | 1 |
Brake hose damaged | 1 |
Stop lamp not working |1.2.1b| | 1 |
Rear fog lamp not working |1.3.2b| | 1 |
Parking brake efficiency below requirements |3.7.C.1b| | 1 |
Nearside Front Direction indicators not working |1.5.1c| | 1 |
Nearside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
All direction indicators not working (4.4.1 (a) (ii)) | 1 |
Front Brake lever mounting insecure lock nut missing |3.1.2a| | 1 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Front Horn not working |1.7.3a| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i|| | 1 |
Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
Headlamp not working on main beam |4.1.1 |a| |ii|| | 1 |
Fuel tank insecure |6.1.3 |a| |i|| | 1 |
Rear Brake effort inadequate at a wheel |1.2.1 |a| |i|| | 1 |
Front Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
Nearside Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
Offside Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Front Fork yoke deformed |2.1.1b| | 1 |
Nearside Front Brake disc|s| insecure |3.2.A1g| | 1 |
Offside Front Brake disc|s| insecure |3.2.A1g| | 1 |
Rear position lamp incorrect colour |1.1.2b| | 1 |
Stop lamp emits other than a steady red light |1.3.1b| | 1 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Offside Front Brake pipe union leaking fluid |3.2.B4| | 1 |
Nearside Front Brake pipe union leaking fluid |3.2.B4| | 1 |
Chain guard insecure |6.2.1c| | 1 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Headlamp aim so that beam "kick up" is not visible on the screen |1.6.B.1| | 1 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Fuel cap mounting flange/sealing method defective |7.2.2c| | 1 |
Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride sprocket carrierbolts lose |6.2.1h| | 1 |
Front Brake disc|s| is excessively distorted |3.2.A1m| | 1 |
Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Throttle operating incorrectly |6.2.1f| | 1 |
Rear Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Rear Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Front Riders seat insecure |6.2.1a| | 1 |
Rear Footrest missing |6.2.1a| | 1 |
Rear Seat insecure missing |6.2.1a| | 1 |
Offside Front Brake hose leaking fluid |3.2.B4| | 1 |
Offside Handlebar deformed |2.1.1b| | 1 |
Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Front Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Front Brake excessively binding (1.2.1 (f)) | 1 |
Rear Suspension rod pin or bush excessively worn shock linkage (5.3.4 (a) (i)) | 1 |
Brake performance not tested (1.2.1 (g)) | 1 |
Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
Rear reflector on motorcycle incorrectly positioned |1.4.2d| | 1 |
Front Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
Front Brake excessively binding |1.2.1 |f|| | 1 |
Nearside Rear Footrest missing |6.2.1a| | 1 |
Exhaust markings indicating not for road use or similar wording |7.1.4| | 1 |
Nearside Rear Rear reflector reflecting white to the rear (4.8.2 (a) (ii)) | 1 |
Exhaust markings indicating not for road use or similar wording (6.1.2 (c)) | 1 |
Nearside Rear Direction indicator incorrect colour (4.4.3 (a)) | 1 |
Horn control defective |1.7.2a| | 1 |
Rear Decelerometer brake test indicates a binding brake |3.3.E1d| | 1 |
Front Steering operation restricted in free movement from lock to lock (2.1.4 (c)) | 1 |
Offside Direction indicator not working |1.5.1c| | 1 |
Front mudguard insecure |2.3.7| | 1 |
Offside Front Front wheel spindle securing nut locking device missing |2.3.5a| | 1 |
Rear Front wheel bearings have excessive free play |2.3.5b| | 1 |
Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Front Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 1 |
Offside Rear Direction indicator not working |1.5.1c| | 1 |
Rear Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
Rear Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Front Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
Rear Drive chain worn to excess |6.2.1e| | 1 |
Nearside Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Offside Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
Front wheel bearings are excessively rough |2.3.5b| | 1 |
Offside Front Brake disc|s| is excessively distorted |3.2.A1m| | 1 |
Rear Stop lamp does not emit a steady light |1.3.1b| | 1 |
Nearside Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Centre Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Front Plate brake test indicates a binding brake |3.3.B1a| | 1 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Drive chain worn to excess |6.2.1e| | 1 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 1 |
Front Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Position lamp not working (4.2.1 (a)) | 1 |
Nearside Drive chain worn to excess |6.2.1e| | 1 |
Offside Front Brake component worn and seriously reduced in strength FRONT DISC BOBINS WORN |3.2.A1| | 1 |
Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Brake excessively binding (1.2.1 (f)) | 1 |
Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Front Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Front Headlamp aim beam image kick-up is to the offside |1.6.1| | 1 |
Front Front wheel bearings are excessively rough |2.3.5b| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Nearside Rear Lower Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Offside Rear Lower Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Rear suspension movement is excessively stiff |2.4.A.3b| | 1 |
Front suspension assembly excessive wear or free play in a front suspension component |2.3.4| | 1 |
Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Brake fluid reservoir leaking hydraulic fluid |3.2.B1e| | 1 |
Nearside Front Direction indicator not working |1.5.1c| | 1 |
Exhaust excessively deteriorated |7.1.1a| | 1 |