| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 7 |
| Rear reflector on motorcycle missing |1.4.1| | 5 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
| Horn not working |1.7.3a| | 3 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 3 |
| Stop lamp does not illuminate immediately a brake applies front brake |1.3.1a| | 2 |
| Drive chain excessively loose |6.2.1d| | 2 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
| Registration plate issues | 2 |
| Horn sound not in accordance with requirements |7.7 |c|| | 1 |
| Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Offside Rear Direction indicators not working |1.5.1c| | 1 |
| Headlamp insecure |1.2.3b| | 1 |
| Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
| Headlamp aim beam image kick up to the offside |1.6| | 1 |
| Front Direction indicator incorrect colour |1.5.1b| | 1 |
| Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Offside Front Brake disc contaminated |1.1.14 |b|| | 1 |
| Front Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
| Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
| Offside Front Brake hose leaking fluid |3.2.B4| | 1 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Rear All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
| Nearside Front Brake hose fouling |3.2.B3b| | 1 |
| Brake hose damaged | 1 |
| Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Offside Front Direction indicator likely to become detached (4.4.1 (c) (ii)) | 1 |
| Front suspension has inadequate damping effect. |2.3.6c| | 1 |
| Rear Brake component worn and seriously reduced in strength |3.2.A1| | 1 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |
| Rear Brake hose leaking (1.1.12 (c)) | 1 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 1 |
| Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
| Front Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
| Indicator tell tale not functioning None fitted |1.5.2| | 1 |
| Stop lamp missing No stop lamp fitted off front brake |1.3.3a| | 1 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Rear Brake master cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
| Centre Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Offside Front Direction indicators not working |1.5.1c| | 1 |
| Stop lamp not working |4.3.1 |a| |ii|| | 1 |
| Throttle operating incorrectly |6.2.1f| | 1 |
| Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
| Front Horn not working |1.7.3a| | 1 |
| Front Front position lamp insecure |1.1.1c| | 1 |
| Front Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
| Rear Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
| Nearside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Throttle operating incorrectly (6.2.7 (a) (i)) | 1 |
| Registration plate lamp issues | 1 |
| Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
| Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
| Rear Position lamp not working |4.2.1 |a|| | 1 |
| Stop lamp not working on neither front or rear |4.3.1 |a| |ii|| | 1 |