Most common failures | No# failures |
---|
Headlamp aim out of alignment | 46 |
Rear reflector on motorcycle missing |1.4.1| | 35 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 20 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 17 |
Registration plate issues | 13 |
Drive chain excessively loose |6.2.1d| | 10 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 8 |
Front shock absorber seal failed and leaking oil |2.3.3| | 7 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 7 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 7 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 7 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 6 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 6 |
Rear Rear reflector on motorcycle missing |1.4.1| | 6 |
Drive chain excessively tight |6.2.1d| | 6 |
Horn not working |1.7.3a| | 5 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 5 |
Horn not loud enough to be heard by another road user |1.7.3a| | 5 |
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 4 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 4 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 4 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 4 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 4 |
Drive chain sprocket carrier worn to excess |6.2.1e| | 3 |
Headlamp aim beam image kick up to the offside |1.6| | 3 |
Rear Brake master cylinder insecurely mounted |3.2.B1a| | 3 |
Fuel system component leaking |7.2.1a| | 3 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 3 |
Front wheel bearings are excessively rough |2.3.5b| | 3 |
Headlamp insecure |1.2.3b| | 3 |
Throttle operating incorrectly |6.2.1f| | 3 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Nearside Rear Direction indicator not working |1.5.1c| | 2 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 2 |
Rear wheel bearings are excessively rough |2.4.A.2c| | 2 |
Offside Front Direction indicators not working |1.5.1c| | 2 |
Headlamp incorrect colour |1.2.1| | 2 |
Rear Floor brake test indicates a binding brake |3.3.C2c| | 2 |
Rear Brake disc|s| excessively scored |3.2.A1l| | 2 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
Front Brake lever pivots excessively worn |3.1.3a| | 2 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 2 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 2 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 2 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 2 |
Front Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 2 |
Front Hydraulic brake control feels spongy |3.1.4a| | 2 |
Front wheel bearings have excessive free play |2.3.5b| | 2 |
Rear Drive chain excessively loose |6.2.1d| | 2 |
Nearside Front Direction indicator not working |1.5.1c| | 2 |
Brake pedal insecure |3.1.2a| | 2 |
Nearside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 2 |
Offside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 2 |
Rear Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 2 |
Rear Stop lamp not working |4.3.1 |a| |ii|| | 2 |
Front Brake disc significantly and obviously worn |1.1.14 |a| |i|| | 2 |
Offside Rear Footrest missing |6.2.1a| | 1 |
Nearside Front Motorcycle structure cracked |6.1.1a| | 1 |
Front Brake lever insecure |3.1.2a| | 1 |
Offside Front Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Nearside Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Offside Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Front Headlamp aim beam image kick up to the offside |1.6| | 1 |
Front Direction indicators not working |1.5.1c| | 1 |
Front Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Offside Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Rear Brake master cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
Offside Outer Motorcycle structure cracked |6.1.1a| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i|| | 1 |
Wheel alignment incorrect which adversely affects the handling |2.4 |a|| | 1 |
Brake pedal has insufficient reserve travel rear brake pedal |1.1.2 |a|| | 1 |
Rear reflector missing |4.8.2 |a| |ii|| | 1 |
Throttle operating incorrectly |6.2.7 |a| |i|| | 1 |
Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
Offside Front Footrest insecure |6.2.1a| | 1 |
Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Exhaust mounting missing |7.1.1c| | 1 |
Centre Rear Upper Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Centre Front Upper Steering headbearing has excessive free play |2.2.2| | 1 |
Offside Front Upper Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Direction indicator missing |1.5.1a| | 1 |
Rear Brake disc|s| securing bolt|s| loose |3.2.A1g| | 1 |
Brake reaction bracket securing bolt|s| loose |3.2.A1j| | 1 |
Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
Brake hose excessively deteriorated | 1 |
Offside Front Brake pipe inadequately supported |3.2.B2b| | 1 |
Front Stop lamp does not illuminate immediately a brake applies brake |1.3.1a| | 1 |
Rear Brake locking device missing |3.2.A1e| | 1 |
Rear Brake reaction bracket securing bolt|s| loose |3.2.A1j| | 1 |
Offside Rear Direction indicator not working |1.5.1c| | 1 |
Nearside Headlamp aim beam image kick up to the offside |1.6| | 1 |
Steering control handlebar movement restricted by cables caught on a projection |2.1.2c| | 1 |
Brake master cylinder insecurely mounted |3.2.B1a| | 1 |
Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 1 |
Rear Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Rear Brake pedal is inoperative |3.1.3c| | 1 |
Rear Brake pedal mounting cracked . |3.1.2c| | 1 |
Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Nearside Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
Offside Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Front Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
Nearside Steering control handlebar movement restricted by trapped cables |2.1.2c| | 1 |
Offside Steering control handlebar movement restricted by trapped cables |2.1.2c| | 1 |
Offside Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
Brake pedal is inoperative |3.1.3c| | 1 |
Nearside Footrest insecure |6.2.1a| | 1 |
Front Motorcycle structure excessively damaged front mufguard |6.1.1a| | 1 |
Centre Lower Rear wheel rotation likely to be impeded |6.2.1b| | 1 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Front Steering headbearing has excessive free play |2.2.2| | 1 |
Front Front mudguard insecure |2.3.7| | 1 |
Headlamp aim does not move downwards when dipped |1.6.5| | 1 |
Rear Brake disc|s| cracked |3.2.A1g| | 1 |
Indicator tell tale not operating correctly |1.5.2| | 1 |
Rear Brake disc|s| excessively worn |3.2.A1l| | 1 |
Nearside Front Direction indicators not working |1.5.1c| | 1 |
Rear Brake disc|s| excessively pitted |3.2.A1l| | 1 |
Offside Front Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
Headlamp deteriorated and function impaired |1.2.3a| | 1 |
Front Horn not working |7.7 |a| |ii|| | 1 |
Rear Direction indicator obviously incorrectly positioned |4.4.3 |a|| | 1 |
Rear Brake component is fractured Disc cracked |3.1.5| | 1 |
Registration plate lamp issues | 1 |
Front position lamp damaged and function impaired |1.1.1b| | 1 |
Nearside Steering lock stop ineffective |2.1.3| | 1 |
Offside Steering lock stop ineffective |2.1.3| | 1 |
Rear Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
Centre Rear mono-shock pivot excessively worn |2.4.B.4| | 1 |
Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Rear position lamp incorrect colour |1.1.2b| | 1 |
Rear Brake disc|s| is excessively distorted |3.2.A1m| | 1 |
Rear Lower Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Nearside Front Brake hose excessively twisted |3.2.B3a| | 1 |
Rear Rear wheel spindle securing nut|s| loose |2.4.A.2b| | 1 |
Rear Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Rear Plate brake test indicates a binding brake |3.3.B1a| | 1 |
Rear reflector on motorcycle obscured |1.4.1| | 1 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
Nearside Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Rear wheel has a loose wheel nut|s| |4.2.3a| | 1 |
Front position lamp missing |1.1.1a| | 1 |
Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 1 |
Nearside Rear Footrest missing |6.2.1a| | 1 |
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Offside Front Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Offside Rear Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Handlebar retaining device loose |2.2.1 |b| |i|| | 1 |
Rear Brake disc|s| securing bolt|s| missing |3.2.A1g| | 1 |
Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
Rear Brake cylinder insecurely mounted |3.2.B1a| | 1 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Inner Front Upper Steering headbearing has excessive free play |2.2.2| | 1 |
Offside Rear Lower Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Nearside Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
Rear suspension has a modification which reduces the strength of a load bearing member or its supporting structure. |2.4.A.2d| | 1 |
Rear suspension bearing excessively deteriorated |2.4A.2a|i|| | 1 |
Nearside Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Stop lamp missing |1.3.3a| | 1 |
Nearside Drive chain excessively loose |6.2.1d| | 1 |
Rear Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Offside Footrest insecure |6.2.1a| | 1 |
Steering headbearing has excessive free play |2.2.2| | 1 |
Brake hose damaged | 1 |
Nearside Direction indicator not working |1.5.1c| | 1 |
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 1 |
Front Steering movement excessively rough with the wheel raised |2.2.1b| | 1 |
Rear Rear mono-shock pivot excessively worn |2.4.B.4| | 1 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Horn missing |1.7.1| | 1 |
Front Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
Horn sound not in accordance with requirements |7.7 |c|| | 1 |
Rear Drive chain excessively tight, so that it is likely to fail |6.1.7 |k| |ii|| | 1 |
Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Exhaust markings indicating not for road use or similar wording |6.1.2 |c|| | 1 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Rear Seat insecure |6.2.1a| | 1 |
Drive chain worn to excess |6.2.1e| | 1 |
Offside Front Direction indicator not working |1.5.1c| | 1 |
Nearside Rear Direction indicator incorrect colour |1.5.1b| | 1 |
Offside Rear Direction indicator incorrect colour |1.5.1b| | 1 |
Plate brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.B2b| | 1 |
Direction indicators not working |1.5.1c| | 1 |
Front Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Front Front wheel bearings are excessively rough |2.3.5b| | 1 |
Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Front Brake hose leaking fluid |3.2.B4| | 1 |
Front Brake excessively binding |1.2.1 |f|| | 1 |
Rear Brake excessively binding |1.2.1 |f|| | 1 |
Rear Brake caliper|s| insecure Rear caliper has a bolt missing, Insecure |3.2.A1j| | 1 |