>

MOT History from tests of petrol SUZUKI GSF400s year 1991

Review the list of common SUZUKI GSF400 failures below or to perform a specific mot history check on your SUZUKI then use our popular KnowYourCar service

mot history
Pass percent:70.28%
(The average a petrol SUZUKI GSF400 year 1991 passes without issue)
Based on:572 MOT Tests
Most common failuresNo# failures
Headlamp aim out of alignment29
Rear reflector on motorcycle missing |1.4.1|25
Rear Roller brake test indicates a binding brake |3.3.A1a|11
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a|11
Nearside Front shock absorber seal failed and leaking oil |2.3.3|9
Stop lamp does not illuminate immediately a brake applies |1.3.1a|7
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a|7
Registration plate issues6
Front Roller brake test indicates a binding brake |3.3.A1a|6
Throttle operating incorrectly |6.2.1f|5
Front wheel bearings have excessive free play |2.3.5b|5
Front position lamp does not illuminate immediately when switched on |1.1.3a|5
Drive chain worn to excess |6.2.1e|5
Brake pedal has inadequate reserve travel |3.1.3b|4
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b|4
Rear Floor brake test indicates a binding brake |3.3.C2c|4
Drive chain excessively loose |6.2.1d|4
Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c|4
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||4
Steering headbearing has excessive free play |2.2.2|4
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d|4
Rear Brake disc|s| excessively scored |3.2.A1l|4
Rear Rear reflector on motorcycle missing |1.4.1|4
Front Front mudguard insecure |2.3.7|3
Offside Front shock absorber seal failed and leaking oil |2.3.3|3
Horn not working |1.7.3a|3
Offside Front Front shock absorber seal failed and leaking oil |2.3.3|3
Headlamp aim beam image kick up to the offside |1.6|3
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a|3
Wheel alignment incorrect which adversely affects the handling |2.5.1|3
Front Wheel has an excessively distorted bead rim. |4.2.2|3
Offside Front Footrest insecure |6.2.1a|3
Exhaust markings indicating not for road use or similar wording |7.1.4|3
Headlamp at least one does not illuminate on main beam |1.2.2a|ii||2
Nearside Footrest insecure |6.2.1a|2
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d|2
Rear Brake fluid reservoir fluid level dangerously low |3.2.B1d|2
Rear Lower Rear mono-shock pivot excessively worn |2.4.B.4|2
Nearside Front Direction indicator not working |1.5.1c|2
Rear Brake locking device missing |3.2.A1e|2
Horn not loud enough to be heard by another road user |1.7.3a|2
Rear Drive chain sprocket worn to excess |6.2.1e|2
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h|2
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4|2
Front Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c|2
Offside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k|2
Direction indicators not working |1.5.1c|2
Rear Hydraulic brake control feels spongy |3.1.4a|2
Nearside Rear Footrest missing (6.2.12 (a))2
Offside Rear Footrest missing (6.2.12 (a))2
Nearside Rear Direction indicator not working |1.5.1c|2
Rear reflector on motorcycle obscured |1.4.1|2
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3|2
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2|2
Front Floor brake test indicates a sticking brake |3.3.C2c|2
Fuel system component insecure |7.2.1b|2
Exhaust mounting does not fully support the exhaust system |7.1.1.c|2
Front wheel bearings are excessively rough |2.3.5b|2
Front Brake lever has inadequate reserve travel |3.1.3b|2
Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii||2
Front shock absorber seal failed and leaking oil |2.3.3|2
Rear shock absorber has inadequate damping effect. |2.4.A.3b|2
Rear Brake disc|s| is excessively distorted |3.2.A1m|2
Stop lamp does not illuminate immediately a brake applies FRONT SWITCH FAILURE |1.3.1a|1
Front All position lamps do not illuminate immediately when switched on |1.1.3a|1
Offside Fuel tank leaking |7.2.1a|1
Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c|1
Front Headlamp switch faulty |1.2.4|1
Front Brake fluid reservoir fluid level dangerously low |3.2.B1d|1
Nearside Drive chain excessively tight |6.2.1d|1
Nearside Handlebar deformed |2.1.1b|1
Rear Brake disc|s| cracked |3.2.A1g|1
Centre Rear Rear reflector on motorcycle missing |1.4.1|1
Front Direction indicator insecure |1.5.3b|1
Front Brake disc|s| has excessive run out |3.2.A1m|1
Rear Brake master cylinder fluid level dangerously low |3.2.B1d|1
Front Front shock absorber seal failed and leaking oil |2.3.3|1
Direction indicator not working |1.5.1c|1
Front Drive chain sprocket worn to excess |6.2.1e|1
Nearside Motorcycle structure cracked |6.1.1a|1
Nearside Front Direction indicator missing |1.5.1a|1
Offside Front Direction indicator missing |1.5.1a|1
Nearside Rear Direction indicator missing |1.5.1a|1
Offside Rear Direction indicator missing |1.5.1a|1
Offside Rear Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a))1
Nearside Front Brake disc|s| has excessive run out |3.2.A1m|1
Nearside Front position lamp flickers when tapped lightly by hand |1.1.3c|1
Brake lever has inadequate reserve travel |3.1.3b|1
Headlamp insecure |1.2.3b|1
Front Steering lock stop loose |2.1.3|1
All position lamps do not illuminate immediately when switched on |1.1.3a|1
Nearside Steering lock stop ineffective |2.1.3|1
Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h|1
Offside Front Throttle operating incorrectly (6.2.7 (a) (i))1
Offside Front Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii))1
Nearside Front suspension assembly component excessively corroded. fork stantion |2.3.1|1
Offside Front suspension assembly component excessively corroded. fork stantion |2.3.1|1
Offside Front Brake disc|s| excessively pitted badly corroded |3.2.A1l|1
Nearside Brake disc|s| excessively pitted badly corroded |3.2.A1l|1
Rear Brake disc|s| excessively pitted badly corroded |3.2.A1l|1
Nearside Rear Drive chain sprocket carrier worn to excess |6.2.1e|1
Drive chain excessively tight |6.2.1d|1
Fuel system component leaking |7.2.1a|1
Stop lamp remains on when the brake is released |1.3.1e|1
Rear Roller brake test indicates a sticking brake |3.3.A1a|1
Rear suspension bush has excessive free play |2.4.A2a|i||1
Rear Brake pipe union leaking fluid |3.2.B4|1
Front Handlebar deformed |2.1.1b|1
Nearside Indicator switch insecure |1.5.4|1
Offside Headlamp switch insecure |1.2.4|1
Offside Front Front suspension assembly component missing |2.3.1|1
Rear Brake pedal has inadequate reserve travel |3.1.3b|1
Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c|1
Front Hydraulic brake control feels spongy |3.1.4a|1
Rear Rear suspension bearing has excessive free play |2.4.A2a|i||1
Rear wheel bearings have excessive free play |2.4.A.2c|1
Offside Handlebar handgrip not secure to handlebars. |2.1.1c|1
Rear Floor brake test indicates a sticking brake |3.3.C2c|1
Front Brake disc|s| excessively worn |3.2.A1l|1
Rear Valve stem seriously damaged (5.2.3 (j))1
Brake hose damaged1
Rear Brake reaction bracket securing bolt|s| loose |3.2.A1j|1
Rear Brake hose leaking fluid |3.2.B4|1
Brake hose excessively deteriorated1
Rear suspension component loose |2.4.A.1a|1
Rear Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h|1
Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b|1
Steering control has Insufficient clearance at full lock affecting the riders operation of the controls |2.1.2b|1
Front suspension has inadequate damping effect. |2.3.6c|1
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k|1
Front Wheel has an excessively eccentric bead rim. |4.2.2|1
Outer Rear Footrest missing |6.2.1a|1
Rear Footrest missing |6.2.1a|1
Nearside Front Footrest insecure |6.2.1a|1
Brake locking device missing |3.2.A1e|1
Chain guard insecure |6.2.1c|1
Centre Front Upper Exhaust is leaking and excessively noisey |7.1.1b|1
Centre Rear Lower Wheel alignment incorrect which adversely affects the handling |2.5.1|1
Lower Steering headbearing has excessive free play |2.2.2|1
Rear reflector on motorcycle incorrectly positioned |1.4.2d|1
Front Stop lamp not working (4.3.1 (a) (ii))1
Rear reflector on motorcycle missing (1.4.1)1
Front position lamp does not illuminate immediately when switched on (1.1.3a)1
Nearside Front Front shock absorber seal failed and leaking oil (2.3.3)1
Offside Front Front shock absorber seal failed and leaking oil (2.3.3)1
Front Brake component has restricted free movement and operation is likely to be impeded (3.2.A1h)1
Rear Brake component has restricted free movement and operation is likely to be impeded (3.2.A1h)1
Offside Front Brake disc(s) friction surface contaminated by oil or grease (3.2.A1k)1
Nearside Front shock absorber seal failed and leaking oil (2.3.3)1
Front Direction indicator not working (1.5.1c)1
Front mudguard insecure (2.3.7)1
Stop lamp not working on front brake (4.3.1 (a) (ii))1
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b))1
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b))1
Offside Fuel tank leaking excessively or a risk of fire (6.1.3 (b) (ii))1
Rear reflector missing (4.8.2 (a) (ii))1
Offside Front Direction indicator with a multiple light source more than 1/2 not functioning |4.4.1 |a| |ii||1
Nearside Rear Direction indicator with a multiple light source more than 1/2 not functioning |4.4.1 |a| |ii||1
Offside Rear Direction indicator with a multiple light source more than 1/2 not functioning |4.4.1 |a| |ii||1
Horn not working |7.7 |a| |ii||1
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h|1
Rear Stop lamp remains on when the brake is released |1.3.1e|1
Front suspension has excessive stiffness in the suspension movement. |2.3.6b|1
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b|1
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||1
Front Direction indicators not working |1.5.1c|1
Stop lamp emits other than a steady red light |1.3.1b|1
Front position lamp insecure |1.1.1c|1
Centre Rear reflector on motorcycle missing |1.4.1|1
Centre All position lamps do not illuminate immediately when switched on |1.1.3a|1
Nearside Front Direction indicators not working |1.5.1c|1
Offside Direction indicators not working |1.5.1c|1
Offside Rear Footrest insecure |6.2.1a|1
Centre Riders seat insecure |6.2.1a|1
Nearside Rear Chain guard insecure |6.2.1c|1
Front Front wheel bearings are excessively rough |2.3.5b|1
Front Front wheel bearings have excessive free play |2.3.5b|1
Brake lever mounting insecure |3.1.2a|1
Front Front position lamp incorrect colour |1.1.2a|1
Front Front suspension has excessive stiffness in the suspension movement. |2.3.6b|1
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a|1
Offside Front Footrest insecure (6.2.12 (a))1
Wheel alignment incorrect which adversely affects the handling (2.4 (a))1
Nearside Rear Footrest missing |6.2.1a|1
Offside Rear Footrest missing |6.2.1a|1
Drive chain fouling another component |6.2.1d|1
Drive chain sprocket worn to excess |6.2.1e|1
Exhaust has part of the system missing |7.1.1a|1
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c|1
An item not tested |Manual|1
Front Steering headbearing has excessive free play |2.2.2|1
Centre Front Upper Headlamp aim beam image too far to the right |1.6.4|1
Front Stop lamp affected by the operation of another lamp |1.3.2|1
Horn is not continous or uniform |1.7.3c|1
Rear Stop lamp affected by the operation of another lamp |1.3.2|1
Direction indicators affected by the operation of another lamp |1.5.1c|1
Rear Brake effort inadequate at a wheel (1.2.1 (a) (i))1
Lower Rear mono-shock pivot excessively worn |2.4.B.4|1
Rear wheel rotation likely to be impeded |6.2.1b|1
Front Brake lever pivots excessively worn |3.1.3a|1
Rear Brake disc|s| excessively worn |3.2.A1l|1
Shock absorber has a serious fluid leak |5.3.2 |b||1
Front Stop lamp not working |4.3.1 |a| |ii||1
Motorcycle structure joining/attachment plate or fastening insecure bolt missing front fender |6.1.1 |b| |i||1
Nearside Front Brake hose excessively kinked |3.2.B3a|1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Find us on Facebook

© KnowYourCar™ 2019. All rights reserved
Except where otherwise noted, content on our MOT statistics pages are licensed under a Creative Commons Attribution 4.0 International license.
You are free to redistribute the material in any medium or format as long as credit is given to KnowYourCar

WARNING: We have placed hidden watermarks in our data. We will take action against our data being used outside of these terms.

MOT Data licensed under the Open Government Licence v3.0

By using our site you are agreeing to our terms and conditions
Terms & Conditions  Privacy Policy