| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 11 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 8 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 5 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 4 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
| Riders seat insecure |6.2.1a| | 3 |
| Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) | 3 |
| Horn not working |1.7.3a| | 2 |
| Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 2 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
| Sidecar wheel bearings have excessive free play |5.2.3c| | 2 |
| Sidecar suspension has an insecure unit. |5.2.3a| | 2 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
| Front Stop lamp not working (4.3.1 (a) (ii)) | 2 |
| Nearside Front Lower Roller brake test indicates a binding brake |3.3.A1a| | 2 |
| Offside Front Lower Roller brake test indicates a binding brake |3.3.A1a| | 2 |
| Parking brake lever has no reserve travel |3.1.6b| | 2 |
| Nearside Front brake disc contaminated by oil |3.5.1h| | 2 |
| Nearside Front Front shock absorber seal failed and leaking oil Fork seal |2.3.3| | 1 |
| Rear Brake locking device missing Brake reactor arm forward nut |3.2.A1e| | 1 |
| Registration plate issues | 1 |
| Rear reflector missing (4.8.2 (a) (ii)) | 1 |
| Offside Front Brake caliper insecurely mounted and braking performance affected bolts loose (1.1.16 (c) (ii)) | 1 |
| Front Headlamp not working on dipped beam |1.7.5a| | 1 |
| Offside Front suspension assembly excessive wear or free play in a front suspension component |2.3.4| | 1 |
| Front suspension assembly component excessively misaligned |2.3.1| | 1 |
| Front wheel spindle securing nut locking device missing |2.3.3a| | 1 |
| Rear Floor brake test indicates a binding brake |3.3.C2c| | 1 |
| Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Central Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
| Rear Brake disc|s| cracked |3.2.A1g| | 1 |
| Rear Brake locking device missing |3.2.A1e| | 1 |
| Fuel system component leaking |7.2.1a| | 1 |
| Nearside Front Brake locking device insecure |3.2.A1e| | 1 |
| Horn missing |1.7.1| | 1 |
| Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Headlamp aim beam image kick up to the offside |1.6| | 1 |
| Front Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Nearside Front Direction indicator incorrect colour |1.5.1b| | 1 |
| Offside Front Direction indicator incorrect colour |1.5.1b| | 1 |
| Offside Front Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
| Rear Outer Direction indicators not working |1.5.1c| | 1 |
| Front Brake has no recorded effort at a wheel (1.2.1 (a) (ii)) | 1 |
| Rear Brake excessively binding (1.2.1 (f)) | 1 |
| Roller brake test No brake control achieves an efficiency of 30% (1.2.2 (a) (i)) | 1 |
| Offside Front Upper Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
| Front Position lamp not working (4.2.1 (a)) | 1 |
| Brake hose damaged | 1 |
| Shock absorber has a serious fluid leak |2.7.3| | 1 |
| brake disc has restricted free movement |3.5.1j| | 1 |
| All position lamps not working centre lights working,outer lights needed|trike more than 1.3m wide.| |1.1.A.3b| | 1 |
| Nearside Stop lamp not working |1.2.1b| | 1 |
| Offside Stop lamp not working |1.2.1b| | 1 |
| Rear IMPORTANT. Do not use failure or PRS against this item. For other Body and Structure component defects please enter 5690 in the `Find item` box above. |9.6| | 1 |
| Brake pedal has insufficient reserve movement |3.3.A.5| | 1 |
| IMPORTANT. Do not use failure or PRS against this item. For other Body and Structure component defects please enter 5690 in the `Find item` box above. |9.6| | 1 |
| Offside Rear Stop lamp not working |1.2.1b| | 1 |
| Front Front suspension retaining device missing |2.5.A.4| | 1 |
| Steering control restriction of the free movement of the steering |9.2.2a| | 1 |
| Rear Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Rear All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
| Nearside Front Direction indicators not working |1.5.1c| | 1 |
| Offside Front Direction indicators not working |1.5.1c| | 1 |
| Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
| Parking brake lever defective so that it cannot be satisfactorily operated (1.1.6 (d)) | 1 |
| Rear Brake rod has restricted free movement pedal to cylinder (1.1.15 (e)) | 1 |
| Nearside Rear Suspension component mounting prescribed area is inadequately repaired lower shock mount (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area is inadequately repaired (5.3.6 (a) (i)) | 1 |
| Towbar with an unsafe modification to primary components (6.1.6 (g) (ii)) | 1 |
| Towbar with an unsafe modification to secondary components (6.1.6 (g) (i)) | 1 |
| Stop lamp not working |1.2.1b| | 1 |
| Offside Rear Trailing arm attachment bracket/mounting insecure |2.4.G.1| | 1 |
| Suspension has inadequate clearance with the chassis |2.4.A.1a| | 1 |
| Parking brake: efficiency below requirements |3.7.B.7| | 1 |
| Front Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 1 |
| Hazard warning switch inoperative no switch fitted |4.4.2 |a| |ii|| | 1 |
| Stop lamp|s| not working front brake lever |4.3.1 |a| |ii|| | 1 |
| Parking brake efficiency less than 50% of the required value |1.4.2 |a| |ii|| | 1 |
| Brake lever has inadequate reserve travel |9.3.1f| | 1 |
| Body insecure and dangerous to other road users |6.1.B.1b| | 1 |
| Offside Trailing arm attachment bracket/mounting insecure |2.4.G.1| | 1 |
| Nearside Front shock absorber leaking oil |9.2.7b| | 1 |
| Rear parking brake recording little or no effort | 1 |
| Nearside Rear Valve stem seriously damaged (5.2.3 (j)) | 1 |
| Offside Rear Valve stem seriously damaged (5.2.3 (j)) | 1 |
| Brake cable insecure Broken at hand lever (1.1.15 (c)) | 1 |
| Horn sound not in accordance with requirements (7.7 (c)) | 1 |
| Nearside Front Shock absorbers has a serious fluid leak | 1 |
| Offside Rear Brake master cylinder insecure Wheel cylinder retaining clip missing (1.1.10 (c)) | 1 |
| Parking brake efficiency below requirements (1.4.2 (a) (i)) | 1 |
| Suspension component mounting prescribed area is inadequately repaired both rear (5.3.6 (a) (i)) | 1 |
| Offside Rear Shock absorbers has an excessively worn bush (5.3.2 (c)) | 1 |
| Front Body component insecure mud gaurd (6.2.1 (a) (i)) | 1 |
| Rear Brake reaction bracket securing bolt|s| loose |3.2.A1j| | 1 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Nearside Front Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
| Front Brake lever insecure (1.1.2 (e) (i)) | 1 |
| Rear Stop lamp switch with a delay in operation (4.3.2 (a) (ii)) | 1 |
| Front Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
| Front Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
| Rear Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
| Rear Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
| Steering control handlebar movement restricted by trapped cables |2.1.2c| | 1 |
| Rear Brake pedal cannot be applied smoothly |3.1.3d| | 1 |
| Rear Brake pedal cannot be released smoothly |3.1.3d| | 1 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
| Brake locking device missing |3.2.A1e| | 1 |