Most common failures | No# failures |
---|
Headlamp aim out of alignment | 26 |
Registration plate issues | 12 |
Rear reflector on motorcycle missing |1.4.1| | 7 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 6 |
Riders seat insecure |6.2.1a| | 5 |
Horn not working |1.7.3a| | 5 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 5 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 4 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 4 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 4 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 3 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 3 |
Steering headbearing has excessive free play |2.2.2| | 3 |
Drive chain excessively loose |6.2.1d| | 3 |
Nearside Rear Direction indicator not working |1.5.1c| | 3 |
Front wheel spindle securing nut locking device missing |2.3.3a| | 3 |
Front Headlamp insecure |1.2.3b| | 2 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
Throttle operating incorrectly |6.2.1f| | 2 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 2 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Registration plate lamp issues | 2 |
Drive chain excessively tight |6.2.1d| | 2 |
Headlamp aim beam image kick up to the offside |1.6| | 2 |
Nearside Rear Direction indicators not working |1.5.1c| | 2 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
Front Hydraulic brake control feels spongy |3.1.4a| | 2 |
Front Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 2 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 2 |
Horn not loud enough to be heard by another road user |1.7.3a| | 2 |
Rear Position lamp not working (4.2.1 (a)) | 1 |
Front Steering headbearing has excessive free play |2.2.2| | 1 |
Nearside Front Footrest insecure |6.2.1a| | 1 |
Rear Brake pedal cannot be applied smoothly |3.1.3d| | 1 |
Rear Brake locking device missing split pin missing on caliper retaining rod |3.2.A1e| | 1 |
Centre Front Lower Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Front Stop lamp damaged and function impaired |1.3.3a| | 1 |
Front Horn not working |1.7.3a| | 1 |
Headlamp aim not tested |1.6| | 1 |
Offside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Front Brake pipe excessively damaged |3.2.B2a| | 1 |
Front position lamp insecure |1.1.1c| | 1 |
Brake locking device missing |3.2.A1e| | 1 |
Nearside Footrest insecure |6.2.1a| | 1 |
Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Rear Steering linkage has excessive free play |2.2.2| | 1 |
Upper Front suspension assembly component loose |2.3.1| | 1 |
Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Offside Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Front Front position lamp damaged and function impaired |1.1.1b| | 1 |
Rear Footrest missing |6.2.1a| | 1 |
Brake lever cannot be applied smoothly |3.1.3d| | 1 |
Front Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Headlamp reflector seriously defective (4.1.1 (b) (ii)) | 1 |
Direction indicator flashing less than 60 times a minute all |1.5.1c| | 1 |
Offside Steering lock stop ineffective |2.1.3| | 1 |
Front Brake pipe inadequately supported |3.2.B2b| | 1 |
Horn not working |7.7 |a| |ii|| | 1 |
Fuel system component leaking |7.2.1a| | 1 |
Rear Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
Nearside Front Brake disc contaminated (1.1.14 (b)) | 1 |
Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Wheel alignment incorrect which adversely affects the steering (2.4 (a)) | 1 |
Fuel cap leaking (6.1.3 (b) (i)) | 1 |
Nearside Front Footrest insecure (6.2.12 (a)) | 1 |
Front Brake disc contaminated (1.1.14 (b)) | 1 |
Nearside Steering lock stop ineffective |2.1.3| | 1 |
Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Front Brake lever attachment screws loose |3.1.2b| | 1 |
Front wheel spindle securing nut locking device insecure |2.3.3a| | 1 |
Rear Front wheel spindle securing nut|s| loose |2.3.3a| | 1 |
Horn control defective |1.7.2a| | 1 |
Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 1 |
Horn missing |1.7.1| | 1 |
Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 1 |
Front Brake hose excessively twisted |3.2.B3a| | 1 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 1 |
Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Rear Drive chain excessively loose |6.2.1d| | 1 |
Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Rear Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Floor brake test No brake control achieves an efficiency of 30%. |3.3.C1a| | 1 |
Offside Front Direction indicator not working |1.5.1c| | 1 |
Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
Front Front mudguard insecure |2.3.7| | 1 |
Front Headlamp aim not tested |1.6| | 1 |
Rear Brake pedal is inoperative |3.1.3c| | 1 |
Front Brake master cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
Brake pedal cannot be released smoothly |3.1.3d| | 1 |
Direction indicators not working |1.5.1c| | 1 |
Rear Direction indicator insecure |1.5.3b| | 1 |
Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Rear Brake caliper|s| insecure |3.2.A1j| | 1 |
Handlebar mounting excessively deteriorated |flexible type| |2.1.1d| | 1 |
Front Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 1 |
Centre Front Front position lamp missing |1.1.1a| | 1 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Rear Drive chain worn to excess |6.2.1e| | 1 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Rear Rear suspension component seized |2.4A2a|ii|| | 1 |
Nearside Front Direction indicator not working |1.5.1c| | 1 |
Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Front Front position lamp insecure |1.1.1c| | 1 |
Footrest insecure split pin missing |6.2.1a| | 1 |
Rear Rear suspension component loose swinging arm loose |2.4.A.1a| | 1 |
Rear Drive chain excessively tight |6.2.1d| | 1 |
Position lamp switch faulty |1.1.4a| | 1 |
Headlamp insecure |1.2.3b| | 1 |
Chain guard insecure |6.2.1c| | 1 |
Offside Front Direction indicators not working |1.5.1c| | 1 |
Drive chain so worn it is likely to fail (6.1.7 (c) (ii)) | 1 |
Drive chain sprocket so worn it is likely to fail (6.1.7 (c) (ii)) | 1 |
Rear Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
Front wheel spindle securing nut locking device missing |2.3.5a| | 1 |
Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Rear Brake reaction bracket securing bolt|s| loose |3.2.A1j| | 1 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Centre Front Upper Steering headbearing has excessive free play |2.2.2| | 1 |
Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
Direction indicators flashing less than 60 times a minute all |1.5.1c| | 1 |
Rear Brake excessively binding (1.2.1 (f)) | 1 |
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Brake master cylinder leaking (1.1.10 (b) (ii)) | 1 |