Most common failures | No# failures |
---|
Headlamp aim out of alignment | 17 |
Registration plate issues | 12 |
Horn not working |1.7.3a| | 9 |
Rear reflector on motorcycle missing |1.4.1| | 9 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 9 |
Steering headbearing has excessive free play |2.2.2| | 8 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 7 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 7 |
Brake hose excessively deteriorated | 5 |
Headlamp aim beam image kick up to the offside |1.6| | 5 |
Rear Floor brake test indicates a binding brake |3.3.C2c| | 5 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 4 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 4 |
Throttle operating incorrectly |6.2.1f| | 3 |
Rear Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 3 |
Rear Rear reflector on motorcycle missing |1.4.1| | 3 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 3 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 3 |
Fuel tank leaking |7.2.1a| | 3 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 3 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 3 |
Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 3 |
Riders seat insecure |6.2.1a| | 3 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 3 |
Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 2 |
Drive chain excessively tight |6.2.1d| | 2 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Direction indicators not working |1.5.1c| | 2 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 2 |
Headlamp aim not tested |1.6| | 2 |
Front Front wheel bearings have excessive free play |2.3.5b| | 2 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 2 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
Front Headlamp aim beam image kick-up is to the offside |1.6.1| | 2 |
Front wheel spindle securing nut locking device missing |2.3.3a| | 2 |
Offside Rear Brake locking device missing |3.2.A1e| | 2 |
Front wheel bearings are excessively rough |2.3.5b| | 2 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Handlebar mounting clamp bolt loose |2.1.1a| | 2 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Drive chain excessively loose |6.2.1d| | 2 |
Fuel system component leaking |7.2.1a| | 2 |
Centre Fuel system component leaking |7.2.1a| | 1 |
Front Direction indicator not working |1.5.1c| | 1 |
Rear Direction indicator not working |1.5.1c| | 1 |
Front Headlamp aim beam image kick up to the offside |1.6| | 1 |
Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Rear Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Front Brake pipe inadequately supported |3.2.B2b| | 1 |
Rear Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Rear Brake pedal is inoperative |3.1.3c| | 1 |
Rear Brake pedal pivots excessively worn |3.1.3a| | 1 |
Rear wheel spindle securing nut locking device insecure |2.4.A.2b| | 1 |
Brake locking device missing |3.2.A1e| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |
Nearside Rear Direction indicators not working |1.5.1c| | 1 |
Rear Brake locking device missing |3.2.A1e| | 1 |
Clutch lever positioned so it cannot be readily operated. |6.2.1g| | 1 |
Direction indicators affected by the operation of another lamp indicator occupies stop light space |1.5.1c| | 1 |
Stop lamp affected by the operation of another lamp stop lamp occupies indicator space |1.3.2| | 1 |
Rear Roller brake test indicates a severely juddering brake |3.3.A1b| | 1 |
Front Front wheel insecure |4.2.3b| | 1 |
Offside Direction indicators not working |1.5.1c| | 1 |
Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
Headlamp switch faulty |1.2.4| | 1 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Offside Rear Rear wheel spindle securing nut locking device insecure |2.4.A.2b| | 1 |
Steering control handlebar movement restricted by cables caught on a projection |2.1.2c| | 1 |
Front Steering control handlebar movement restricted by trapped cables |2.1.2c| | 1 |
Steering movement excessively rough with the wheel raised |2.2.1b| | 1 |
Offside Direction indicator not working |1.5.1c| | 1 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Offside Front Front suspension assembly component excessively corroded. |2.3.1| | 1 |
Offside Front Upper Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
Indicator tell tale not operating correctly |1.5.2| | 1 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Offside Front Upper Brake component leaking fluid |3.2.B4| | 1 |
Offside Rear Brake pipe excessively damaged |3.2.B2a| | 1 |
Offside Front Upper Brake pipe excessively damaged |3.2.B2a| | 1 |
Offside Rear Brake master cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
Nearside Front Direction indicators not working |1.5.1c| | 1 |
Inner Motorcycle structure excessively distorted |6.1.1a| | 1 |
Rear Brake pipe union leaking fluid |3.2.B4| | 1 |
Nearside Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Riders seat insecure wont lock closed |6.2.1a| | 1 |
Nearside Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Front Horn not working |1.7.3a| | 1 |
Rear Wheel spoke excessively loose |4.2.1b| | 1 |
Rear Brake reaction bracket securing bolt|s| loose |3.2.A1j| | 1 |
Rear Brake locking device missing reaction bar |3.2.A1e| | 1 |
Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
Front Direction indicator insecure |1.5.3b| | 1 |
Rear Direction indicator insecure |1.5.3b| | 1 |
Front Hydraulic brake control feels spongy |3.1.4a| | 1 |
Front wheel bearings have excessive free play |2.3.5b| | 1 |
Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Front Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Rear Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Rear Rear position lamp flickers when tapped lightly by hand |1.1.3c| | 1 |
Front Front position lamp missing |1.1.1a| | 1 |
Offside Front Direction indicator not working |1.5.1c| | 1 |
Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
Centre Rear Upper Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Front Wheel spoke excessively loose |4.2.1b| | 1 |
Steering control handlebar movement restricted by taut cables |2.1.2c| | 1 |
Rear Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Front Riders seat insecure |6.2.1a| | 1 |
Centre Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Nearside Rear Lower Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
Footrest missing |6.2.1a| | 1 |
Front Brake lever mounting insecure |3.1.2a| | 1 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Stop lamp does not emit a steady light |1.3.1b| | 1 |
Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
Nearside Rear Direction indicator not working |1.5.1c| | 1 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Front Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Headlamp aim beam image kick-up is to the offside |1.6.1| | 1 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Brake hose damaged | 1 |
Fuel system component insecure |7.2.1b| | 1 |
Rear position lamp incorrect colour |1.1.2b| | 1 |
Rear Brake disc|s| excessively worn |3.2.A1l| | 1 |
Front wheel spindle securing nut|s| loose |2.3.3a| | 1 |
Throttle operating incorrectly throttle not returning and stiff to operate |6.2.7 |a| |i|| | 1 |
Rear Lower Motorcycle structure excessively corroded |6.1.1a| | 1 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Offside Lower Front shock absorber seal failed and leaking oil LEAK FROM ALLY COVER ? |2.3.3| | 1 |
Rear Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
Fuel pipe leaking |7.2.1a| | 1 |
Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
Rear position lamp damaged and function impaired |1.1.1b| | 1 |
Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Nearside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Rear Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Offside Rear Footrest missing |6.2.1a| | 1 |
Rear Drive chain worn to excess |6.2.1e| | 1 |
Rear Drive chain excessively loose |6.2.1d| | 1 |
Rear Brake reaction bracket securing bolt|s| loose Nut locking device missing |3.2.A1j| | 1 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride swing arm nut |6.2.1h| | 1 |
Rear Plate brake test indicates a binding brake |3.3.B1a| | 1 |
Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 1 |
Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Rear Rear mono-shock pivot excessively worn |2.4.B.4| | 1 |
Drive chain worn to excess |6.2.1e| | 1 |
Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Rear reflector missing |4.8.2 |a| |ii|| | 1 |
Headlamp insecure |1.2.3b| | 1 |
Front position lamp damaged and function impaired |1.1.1b| | 1 |
Rear All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Rear Brake reaction bracket insecure |3.2.A1j| | 1 |
Offside Rear Footrest insecure |6.2.1a| | 1 |
Floor brake test No brake control achieves an efficiency of 30%. |3.3.C1a| | 1 |