Most common failures | No# failures |
---|
Headlamp aim out of alignment | 12 |
Registration plate issues | 7 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 7 |
Horn not working |1.7.3a| | 5 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 5 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 3 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 3 |
Rear reflector on motorcycle missing |1.4.1| | 3 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 3 |
Front Roller brake test indicates a sticking brake |3.3.A1a| | 2 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
Drive chain excessively loose |6.2.1d| | 2 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Headlamp aim not tested |1.6| | 2 |
Nearside Rear Direction indicators not working |1.5.1c| | 2 |
Offside Rear Direction indicators not working |1.5.1c| | 2 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Rear Brake reaction bracket insecure |3.2.A1j| | 2 |
Horn not loud enough to be heard by another road user |1.7.3a| | 2 |
Front Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 2 |
Drive chain worn to excess |6.2.1e| | 1 |
Rear Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Front Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Nearside Front Brake disc insecure |1.1.14 |a| |ii|| | 1 |
Headlamp insecure |4.1.1 |c|| | 1 |
Front Brake indicates excessive fluctuation of brake effort |1.2.1 |e|| | 1 |
Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Rear Brake locking device missing |3.2.A1e| | 1 |
Stop lamp emits other than a steady red light |1.3.1b| | 1 |
Nearside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Front Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
Rear Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
Front Steering headbearing has excessive free play |2.2.2| | 1 |
Offside Steering lock stop ineffective |2.1.3| | 1 |
Nearside Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Offside Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Headlamp incorrect colour |1.2.1| | 1 |
Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
Offside Rear Footrest missing |6.2.1a| | 1 |
Nearside Rear Footrest missing |6.2.1a| | 1 |
Offside Rear Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Offside Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Offside Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Nearside Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Rear Drive chain worn to excess |6.2.1e| | 1 |
Rear Drive chain excessively loose |6.2.1d| | 1 |
Front Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Headlamp aim beam image kick up to the offside |1.6| | 1 |
Offside Front Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
Offside Rear Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
Central Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Offside Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride split pin missing in rear axle nut |6.2.1h| | 1 |
Central Front Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking front mudguard insecure |6.1.1c| | 1 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Brake lever cannot be applied smoothly |3.1.3d| | 1 |
Brake locking device missing split pins missing from rear brake anchor |3.2.A1e| | 1 |
Front wheel spindle securing nut locking device missing |2.3.3a| | 1 |
Front Brake master cylinder fluid level dangerously low |3.2.B1d| | 1 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Rear Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Brake performance not tested |3.3| | 1 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 1 |
Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 1 |
Rear wheel spindle securing nut locking device insecure |2.4.A.2b| | 1 |
Riders seat insecure (6.2.5 (a) (ii)) | 1 |
Suspension arm attachment bracket/mounting insecure swinging arm pivot bolt loose (5.3.3 (a) (i)) | 1 |
Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Footrest missing |6.2.1a| | 1 |
Horn not working |7.7 |a| |ii|| | 1 |
Steering headbearing has excessive free play |2.2.2| | 1 |
Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Rear Brake excessively binding (1.2.1 (f)) | 1 |
Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Headlamp insecure |1.2.3b| | 1 |
Riders seat insecure |6.2.5 |a| |ii|| | 1 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Rear Brake reaction bracket securing bolt|s| loose |3.2.A1j| | 1 |
Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
Wheel more than one fixing missing split pin missing |5.2.1 |a| |ii|| | 1 |
Front wheel spindle loose |2.3.3a| | 1 |
Direction indicators not working |1.5.1c| | 1 |
Fuel hose leaking |7.2.1a| | 1 |
Offside Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Rear Brake reaction bracket securing bolt|s| missing |3.2.A1j| | 1 |
Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Centre Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Nearside Fuel system component leaking carb |7.2.1a| | 1 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Front Direction indicator not working |1.5.1c| | 1 |
Rear Direction indicator not working |1.5.1c| | 1 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Front Brake master cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Offside Rear Direction indicator not working |1.5.1c| | 1 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Offside Rear Brake locking device missing |3.2.A1e| | 1 |
Nearside Front Steering lock stop ineffective |2.1.3| | 1 |
Offside Front Steering lock stop ineffective |2.1.3| | 1 |
Rear Drive chain fouling another component |6.2.1d| | 1 |
Front wheel bearings have excessive free play |2.3.5b| | 1 |
Front wheel bearings are excessively rough |2.3.5b| | 1 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Front Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Chain guard insecure |6.2.1c| | 1 |
Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Front wheel spindle securing nut locking device missing |2.3.5a| | 1 |
Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Rear wheel rotation likely to be impeded |6.2.1b| | 1 |
Nearside Front Upper Front shock absorber seal failed and leaking oil |2.3.3| | 1 |