| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 12 |
| Drive chain excessively loose |6.2.1d| | 6 |
| Drive chain worn to excess |6.2.1e| | 5 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
| Rear Drive chain sprocket worn to excess |6.2.1e| | 4 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 3 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
| Horn not working |1.7.3a| | 3 |
| Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 2 |
| Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
| Front Horn not working |1.7.3a| | 2 |
| Steering movement excessively stiff with the wheel raised |2.2.1b| | 2 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
| Rear Exhaust silencer insecure (8.1.1 (b) (i)) | 1 |
| Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
| Motorcycle structure excessively corroded Oil cooler pipe. |6.1.1a| | 1 |
| Rear Brake master cylinder insecurely mounted |3.2.B1a| | 1 |
| Nearside Rear Footrest insecure |6.2.1a| | 1 |
| Front Drive chain sprocket worn to excess |6.2.1e| | 1 |
| Rear Brake indicates excessive fluctuation of brake effort |1.2.1 |e|| | 1 |
| Front Upper Horn not working |1.7.3a| | 1 |
| Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Drive chain excessively loose |Adjusted| |6.2.1d| | 1 |
| Rear Suspension arm pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
| Brake master cylinder defective but brake still operating (1.1.10 (b) (i)) | 1 |
| Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
| Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
| Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
| Brake performance not tested |3.3| | 1 |
| Stop lamp damaged and function impaired stop light switch |1.3.3a| | 1 |
| Stop lamp remains on when the brakes are released | 1 |
| Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Handlebar deformed |2.1.1b| | 1 |
| Front Indicator tell tale not functioning |1.5.2| | 1 |
| Registration plate issues | 1 |
| Rear Stop lamp does not illuminate immediately a brake applies Front brake lever applied/stop light does not illuminate. |1.3.1a| | 1 |
| Front Direction indicator insecure |1.5.3b| | 1 |
| Clutch lever shortened so it cannot be readily operated. |6.2.1g| | 1 |
| Offside Rear Footrest insecure |6.2.1a| | 1 |
| Front Headlamp aim beam image kick up to the offside |1.6| | 1 |
| Front Brake grabbing severely |1.2.1 |c|| | 1 |
| Horn not working (7.7 (a)) | 1 |
| Front All direction indicators adversely affected by the operation of another lamp (4.4.3 (b)) | 1 |
| Drive chain excessively loose (6.1.7 (c) (i)) | 1 |
| Front Brake fluid contaminated (1.8 (a)) | 1 |
| Nearside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Rear Suspension attachment bracket/mounting insecure (5.3.3 (a) (i)) | 1 |
| Stop lamp does not emit a steady light |1.3.1b| | 1 |
| Direction indicators not working |1.5.1c| | 1 |
| Rear position lamp insecure |1.1.1c| | 1 |
| Rear Roller brake test indicates a severely juddering brake |3.3.A1b| | 1 |
| Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
| Front Motorcycle structure excessively corroded |6.1.1a| | 1 |
| Nearside Rear Footrest missing |6.2.1a| | 1 |
| Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
| Headlamp aim unable to be tested (4.1.2 (b)) | 1 |
| Drive chain worn to excess (6.1.7 (c) (i)) | 1 |
| Rear Brake excessively binding (1.2.1 (f)) | 1 |
| Rear Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |
| Centre Front Upper Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
| Brake locking device missing |3.2.A1e| | 1 |
| Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
| Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 1 |
| Rear Brake disc significantly and obviously worn (1.1.14 (a) (i)) | 1 |
| Front Brake grabbing severely (1.2.1 (c)) | 1 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 1 |
| Drive chain sprocket worn to excess |6.2.1e| | 1 |
| Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
| All direction indicators not working |4.4.1 |a| |ii|| | 1 |
| Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Drive chain excessively tight |6.2.1d| | 1 |