Most common failures | No# failures |
---|
Headlamp aim out of alignment | 15 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 7 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 7 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 6 |
Drive chain excessively loose |6.2.1d| | 4 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
Drive chain worn to excess |6.2.1e| | 3 |
Front Brake excessively binding (1.2.1 (f)) | 3 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 3 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 2 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
Front wheel bearings have excessive free play |2.3.5b| | 2 |
Headlamp aim not tested |1.6| | 2 |
Rear reflector on motorcycle missing |1.4.1| | 2 |
Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 2 |
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 2 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Rear Brake excessively binding (1.2.1 (f)) | 2 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 2 |
Rear mono-shock pivot excessively worn |2.4.B.4| | 1 |
Nearside Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Drive chain fouling another component |6.2.1d| | 1 |
Rear Footrest missing |6.2.1a| | 1 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Front Brake lever cannot be applied smoothly |3.1.3d| | 1 |
Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Rear Wheel fixing loose (single fixing) (5.2.1 (a) (ii)) | 1 |
Headlamp aim beam image kick up to the offside |1.6| | 1 |
Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Nearside Steering operation linkage fouling when handlebars turned from lock to lock wiring harness (2.1.4 (a)) | 1 |
Front Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
Front Front wheel bearings are excessively rough |2.3.5b| | 1 |
Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Brake hose excessively deteriorated | 1 |
Front Lower Rear mono-shock pivot excessively worn |2.4.B.4| | 1 |
Rear Upper Rear mono-shock pivot excessively worn |2.4.B.4| | 1 |
Centre Lower Rear mono-shock pivot excessively worn |2.4.B.4| | 1 |
Centre Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Offside Steering lock stop ineffective |2.1.3| | 1 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Front position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Rear Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Horn is not a constant note |1.7.3c| | 1 |
Front Headlamp aim beam image kick-up is to the offside |1.6.1| | 1 |
Offside Handlebar deformed |2.1.1b| | 1 |
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 1 |
Rear Lower Rear reflector on motorcycle missing |1.4.1| | 1 |
Front Brake locking device missing |3.2.A1e| | 1 |
Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
Rear Brake disc|s| excessively worn |3.2.A1l| | 1 |
Rear Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Front Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Rear Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Front Steering lock stop maladjusted |2.1.3| | 1 |
Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 1 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Offside Rear Brake disc|s| excessively scored |3.2.A1l| | 1 |
Offside Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
Rear Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
Rear Roller brake test indicates a severely juddering brake |3.3.A1b| | 1 |
Stop lamp does not illuminate immediately a brake applies handle bar switch |1.3.1a| | 1 |
Brake fluid reservoir severely damaged front master cylinder cap cracked |3.2.B1b| | 1 |
Offside Rear Footrest missing |6.2.1a| | 1 |
Offside Front Brake disc|s| securing bolt|s| loose |3.2.A1g| | 1 |
Centre Front Handlebar deformed |2.1.1b| | 1 |
Horn control defective |1.7.2a| | 1 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Drive chain excessively tight |6.2.1d| | 1 |
An item not tested |Manual| | 1 |
Rear Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Rear Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |
Drive chain horseshoe locking device incorrectly fitted (6.1.7 (j) (i)) | 1 |
Nearside Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |
Drive chain excessively tight (6.1.7 (k) (i)) | 1 |
Horn not working |1.7.3a| | 1 |
Fuel system component leaking |7.2.1a| | 1 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
Centre Rear Lower Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Offside Front Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
Registration plate issues | 1 |
Front Brake lever not releasing correctly and functionality of brakes affected (1.1.2 (b) (ii)) | 1 |
Nearside Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Rear An item not tested |Manual| | 1 |
Front Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Headlamp not working on dipped beam dip beam not working (4.1.1 (a) (ii)) | 1 |
Front Brake indicates excessive fluctuation of brake effort front disc warped (1.2.1 (e)) | 1 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 1 |
Rear Exhaust excessively deteriorated |7.1.1a| | 1 |
Rear Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Front wheel bearings are excessively rough |2.3.5b| | 1 |
Rear Hydraulic brake control feels spongy |3.1.4a| | 1 |
Plate brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.B2b| | 1 |