>

MOT History from tests of petrol SUZUKI GS500s year 2007

Review the list of common SUZUKI GS500 failures below or to perform a specific mot history check on your SUZUKI then use our popular KnowYourCar service

mot history
Pass percent:80.00%
(The average a petrol SUZUKI GS500 year 2007 passes without issue)
Based on:940 MOT Tests
Most common failuresNo# failures
Headlamp aim out of alignment48
Rear reflector on motorcycle missing |1.4.1|13
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a|10
Drive chain excessively loose |6.2.1d|10
Drive chain worn to excess |6.2.1e|7
Horn not working |1.7.3a|6
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||5
Steering headbearing has excessive free play |2.2.2|4
Offside Front shock absorber seal failed and leaking oil |2.3.3|4
Front Stop lamp not working |4.3.1 |a| |ii||4
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c|3
Front wheel bearings have excessive free play |2.3.5b|3
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b))3
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b))3
Steering movement excessively `notchy` with the wheel raised |2.2.1b|3
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d|3
Rear Brake disc|s| excessively scored |3.2.A1l|2
Centre Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a|2
Registration plate issues2
Front wheel bearings are excessively rough |2.3.5b|2
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a|2
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a|2
Rear Stop lamp not working (4.3.1 (a) (ii))2
Nearside Front shock absorber seal failed and leaking oil |2.3.3|2
Front Brake lever cannot be applied smoothly |3.1.3d|2
Headlamp aim beam image kick up to the offside |1.6|2
Handlebar deformed |2.1.1b|2
Offside Front Front shock absorber seal failed and leaking oil |2.3.3|2
Rear reflector on motorcycle obscured |1.4.1|2
Stop lamp does not illuminate immediately a brake applies |1.3.1a|2
Drive chain excessively tight |6.2.1d|2
Offside Front Footrest insecure |6.2.1a|2
Front Stop lamp not working (4.3.1 (a) (ii))2
Offside Front Direction indicator not working (4.4.1 (a) (ii))2
Rear reflector missing (4.8.2 (a) (ii))2
Drive chain excessively tight (6.1.7 (k) (i))2
Front Roller brake test indicates a sticking brake |3.3.A1a|2
Rear Drive chain sprocket worn to excess |6.2.1e|2
Front shock absorber seal failed and leaking oil |2.3.3|2
Front Headlamp aim so that beam "kick up" is not visible on the screen |1.6.B.1|1
Direction indicators affected by the operation of another lamp |1.5.1c|1
Front Headlamp aim so that beam "kick up" is not visible on the screen headlight incorrect patterns |4.1.2 |a||1
Steering headbearing has excessive free play headstock nut loose |2.2.2|1
Drive chain excessively tight, so that it is likely to fail (6.1.7 (k) (ii))1
Chain guard insecure |6.2.1c|1
Rear An item not tested |Manual|1
Steering movement excessively stiff with the wheel raised |2.2.1b|1
Horn not loud enough to be heard by another road user |1.7.3a|1
Direction indicators flashing more than 120 times per minute |1.5.1c|1
Nearside Front Direction indicator insecure |1.5.3b|1
Offside Front Direction indicator insecure |1.5.3b|1
Front Brake component worn and seriously reduced in strength |3.2.A1|1
Centre Front Horn not working |1.7.3a|1
Centre Front Steering headbearing has excessive free play |2.2.2|1
Offside Handlebar deformed |2.1.1b|1
Drive chain so worn it is likely to fail (6.1.7 (c) (ii))1
Exhaust system insecure (6.1.2 (a))1
Drive chain excessively loose (6.1.7 (c) (i))1
Nearside Inner Motorcycle structure cracked |6.1.1a|1
Steering lock stop ineffective |2.1.3|1
Clutch lever positioned so it cannot be readily operated. |6.2.1g|1
All direction indicators light intensity significantly reduced indicators work intermittently and lose intensity when engine rpm rises (4.4.3 (a))1
Steering headbearing excessively stiff or notchy (2.2.2 (f) (i))1
Centre Front Motorcycle structure excessively corroded frame |6.1.1a|1
Wheel alignment incorrect which adversely affects the handling |2.5.1|1
Front Brake lever is bent and the brake cannot be readily applied |3.1.3c|1
Steering control fouling between components which interferes with the free movement of the steering |2.1.2a|1
Horn not working |7.7 |a| |ii||1
Rear Rear suspension bush has excessive free play |2.4.A2a|i||1
Front Plate brake test indicates a binding brake |3.3.B1a|1
Offside Front Brake disc contaminated (1.1.14 (b))1
Rear Floor brake test indicates a binding brake |3.3.C2c|1
Horn control not functioning. |1.7.2b|1
Rear Brake lever pivot excessively tight |1.1.1 |a||1
Stop lamp not working FRONT |4.3.1 |a| |ii||1
Offside Front Suspension arm attachment bracket/mounting fractured |5.3.3 |b| |ii||1
Fuel pipe leaking |7.2.1a|1
Front Brake disc|s| excessively worn |3.2.A1l|1
Offside Wheel alignment incorrect which adversely affects the handling |2.5.1|1
Indicator switch insecure |1.5.4|1
Throttle operating incorrectly does not return immediately |6.2.1f|1
Handlebar handgrip not secure to handlebars. left hand grip insecure |2.1.1c|1
Front Front mudguard insecure |2.3.7|1
Nearside Front Footrest insecure |6.2.1a|1
Fuel cap mounting flange/sealing method defective excessive paint on seal |7.2.2c|1
Horn missing |1.7.1|1
Rear wheel spindle securing nut locking device insecure |2.4.A.2b|1
Rear Stop lamp does not emit a steady light |1.3.1b|1
Nearside Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b|1
Indicator tell tale not functioning |1.5.2|1
Front Front position lamp does not illuminate immediately when switched on |1.1.3a|1
Drive chain worn to excess (6.1.7 (c) (i))1
Front Headlamp aim projected beam image obviously incorrect LED bulb fitted to halogen lens. (4.1.2 (c))1
Front Stop lamp remains on when the brake is released |1.3.1e|1
Offside Front Shock absorber has a serious fluid leak |5.3.2 |b||1
Throttle operating incorrectly (6.2.7 (a) (i))1
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a|1
Front Wheel bearing has excessive play (5.1.3 (a) (i))1
Exhaust system insecure Silencer and link pipe loose (6.1.2 (a))1
Nearside Drive chain excessively loose |6.2.1d|1
Rear Drive chain excessively loose |6.2.1d|1
Front Wheel bearing play so excessive that directional control is impaired (5.1.3 (a) (ii))1
Rear Rear wheel bearings have excessive free play |2.4.A.2c|1
Headlamp insecure (4.1.1 (c))1
Headlamp at least one does not illuminate on main beam |1.2.2a|ii||1
Front Brake disc contaminated (1.1.14 (b))1
Front Brake disc contaminated oil (1.1.14 (b))1
Rear Valve stem seriously damaged (5.2.3 (j))1
Offside Rear suspension component loose |2.4.A.1a|1
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4|1
Front Roller brake test indicates a binding brake |3.3.A1a|1
Rear shock absorber seal failed and leaking oil |2.4.A.1c|1
Front Brake hose fouling |3.2.B3b|1
Brake fluid reservoir leaking hydraulic fluid |3.2.B1e|1
Front An item not tested |Manual|1
Rear suspension movement is excessively stiff |2.4.A.3b|1
Nearside Front Footrest insecure lock clip missing (6.2.12 (a))1
Front Front wheel bearings are excessively rough |2.3.5b|1
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition |8.1.1 |a||1
Drive chain excessively loose |6.1.7 |c| |i||1
Rear reflector missing |4.8.2 |a| |ii||1
Stop lamp remains on when the brake is released |1.3.1e|1
Stop lamp not working From front control (4.3.1 (a) (ii))1
Centre Lower Rear suspension bearing has excessive free play |2.4.A2a|i||1
Nearside Rear Drive chain excessively loose |6.2.1d|1
Front Brake fluid reservoir fluid level dangerously low |3.2.B1d|1
Rear Position lamp not working (4.2.1 (a))1
Offside Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a|1
Front Lower Rear suspension bush has excessive free play |2.4.A2a|i||1
Headlamp aim not tested (4.1.2 (b))1
Headlamp not working on dipped beam (4.1.1 (a) (ii))1
Steering headbearing excessively stiff or notchy stiff and notchy (2.2.2 (f) (i))1
Front Position lamp missing (4.2.1 (a))1
Front Brake lining|s| less than 1.5 mm thick |3.2.A1f|i||1
Central Front Horn control defective |1.7.2a|1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Find us on Facebook

© KnowYourCar™ 2019. All rights reserved
Except where otherwise noted, content on our MOT statistics pages are licensed under a Creative Commons Attribution 4.0 International license.
You are free to redistribute the material in any medium or format as long as credit is given to KnowYourCar

WARNING: We have placed hidden watermarks in our data. We will take action against our data being used outside of these terms.

MOT Data licensed under the Open Government Licence v3.0

By using our site you are agreeing to our terms and conditions
Terms & Conditions  Privacy Policy