Most common failures | No# failures |
---|
Headlamp aim out of alignment | 66 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 17 |
Drive chain excessively loose |6.2.1d| | 17 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 16 |
Rear reflector on motorcycle missing |1.4.1| | 14 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 13 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 13 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 10 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 10 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 10 |
Rear Brake pedal has inadequate reserve travel |3.1.3b| | 10 |
Front shock absorber seal failed and leaking oil |2.3.3| | 9 |
Registration plate issues | 9 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 9 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 9 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 9 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 8 |
Steering headbearing has excessive free play |2.2.2| | 8 |
Headlamp aim beam image kick up to the offside |1.6| | 8 |
Drive chain worn to excess |6.2.1e| | 8 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 8 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 8 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 8 |
Exhaust is leaking and excessively noisey |7.1.1b| | 7 |
Throttle operating incorrectly |6.2.1f| | 6 |
Horn not working |1.7.3a| | 6 |
Rear Brake disc|s| excessively scored |3.2.A1l| | 6 |
Front Brake disc|s| excessively worn |3.2.A1l| | 5 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 5 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 5 |
Steering movement excessively stiff with the wheel raised |2.2.1b| | 4 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 4 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 4 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 3 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 3 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 3 |
Rear Drive chain excessively loose |6.2.1d| | 3 |
Front Brake lever cannot be applied smoothly |3.1.3d| | 3 |
Front Floor brake test indicates a sticking brake |3.3.C2c| | 3 |
Rear Brake disc|s| excessively worn |3.2.A1l| | 3 |
Drive chain excessively tight |6.2.1d| | 3 |
Rear Rear reflector on motorcycle missing |1.4.1| | 3 |
Front wheel bearings have excessive free play |2.3.5b| | 3 |
Front Headlamp aim beam image kick up to the offside |1.6| | 3 |
Offside Rear Footrest insecure |6.2.1a| | 3 |
Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 3 |
Rear Floor brake test indicates a binding brake |3.3.C2c| | 2 |
Handlebar deformed |2.1.1b| | 2 |
Rear Brake hose which buldges |3.2.B4| | 2 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 2 |
Rear suspension movement is excessively stiff |2.4.A.3b| | 2 |
Rear Brake disc|s| excessively pitted |3.2.A1l| | 2 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 2 |
Front Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
Horn not loud enough to be heard by another road user |1.7.3a| | 2 |
Headlamp incorrect colour |1.2.1| | 2 |
Rear mono-shock pivot excessively worn |2.4.B.4| | 2 |
Stop lamp does not emit a steady light |1.3.1b| | 2 |
Front Drive chain sprocket worn to excess |6.2.1e| | 2 |
Offside Front Direction indicators not working |1.5.1c| | 2 |
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 2 |
Rear suspension bearing has excessive free play |2.4.A2a|i|| | 2 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 2 |
Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 2 |
Nearside Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 2 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
Front mudguard insecure |2.3.7| | 2 |
Offside Steering lock stop ineffective |2.1.3| | 2 |
Rear Hydraulic brake control feels spongy |3.1.4a| | 2 |
Front Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 2 |
Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 2 |
Direction indicators not working |1.5.1c| | 2 |
Offside Direction indicator not working |1.5.1c| | 1 |
Front position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
Front Brake disc|s| is excessively distorted |3.2.A1m| | 1 |
Brake locking device missing rear tie arm locking device |3.2.A1e| | 1 |
Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Drive chain sprocket worn to excess |6.2.1e| | 1 |
Rear suspension component loose |2.4.A.1a| | 1 |
Nearside Rear Motorcycle structure excessively distorted |6.1.1a| | 1 |
Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Clutch lever bent so it cannot be readily operated. |6.2.1g| | 1 |
Clutch lever shortened so it cannot be readily operated. |6.2.1g| | 1 |
Brake lever is bent and the brake cannot be readily applied |3.1.3c| | 1 |
Front An item not tested |Manual| | 1 |
Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Rear suspension bush excessively deteriorated |2.4.A2a|i|| | 1 |
Front Brake disc|s| excessively scored |3.2.A1l| | 1 |
Front Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Service brake: efficiency below requirements |3.7.C.1a| | 1 |
Offside Rear Rear suspension component excessively corroded. |2.4.A.1a| | 1 |
Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Front Headlamp aim beam image kick-up is to the offside |1.6.1| | 1 |
Front Brake hose fouling |3.2.B3b| | 1 |
Motorcycle structure is fractured and structural rigidity is significantly reduced Cush drive (6.1.1 (a) (i)) | 1 |
Steering operation fouling on the fuel tank or bodywork on full lock (2.1.4 (b)) | 1 |
Brake caliper|s| securing bolt|s| missing |3.2.A1j| | 1 |
Nearside Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Offside Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Horn not working (7.7 (a) (ii)) | 1 |
Offside Rear Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Throttle control functioning such that safe operation of the motorcycle is adversely affected (6.2.7 (a) (ii)) | 1 |
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Offside Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
Rear Brake master cylinder fluid level dangerously low |3.2.B1d| | 1 |
Brake component worn and seriously reduced in strength |3.2.A1| | 1 |
Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Nearside Rear Direction indicator not working |1.5.1c| | 1 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Front Brake disc|s| insecure |3.2.A1g| | 1 |
Riders seat insecure |6.2.1a| | 1 |
Steering headbearing excessively stiff or notchy |2.2.2 |f| |i|| | 1 |
Brake reaction bracket securing bolt|s| missing |3.2.A1j| | 1 |
Front Brake cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
Front Position lamp switch insecure |1.1.4b| | 1 |
Offside Rear Lower Brake component is excessively corroded |3.1.5| | 1 |
Nearside Drive chain so worn it is likely to fail |6.1.7 |c| |ii|| | 1 |
Nearside Rear Drive chain sprocket worn to excess |6.1.7 |c| |i|| | 1 |
Direction indicators not working nearside rear |1.5.1c| | 1 |
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Rear Valve stem seriously damaged (5.2.3 (j)) | 1 |
Rear Drive chain excessively loose (6.1.7 (c) (i)) | 1 |
Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
Rear Stop lamp deteriorated and function impaired |1.3.3a| | 1 |
Front Indicator tell tale not functioning |1.5.2| | 1 |
Offside Rear Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Nearside Front Steering lock stop ineffective |2.1.3| | 1 |
Front suspension spring worn and seriously weakened |2.3.2b| | 1 |
Nearside Front Direction indicator damaged and function impaired |1.5.3a| | 1 |
Brake locking device missing |3.2.A1e| | 1 |
Nearside Steering lock stop ineffective |2.1.3| | 1 |
Nearside Indicator tell tale not functioning |1.5.2| | 1 |
Offside Indicator tell tale not functioning |1.5.2| | 1 |
Nearside Front Direction indicator incorrect colour |1.5.1b| | 1 |
Offside Front Direction indicator incorrect colour |1.5.1b| | 1 |
Fairing so located that it is likely to impede the steering |2.1.2e| | 1 |
Headlamp aim beam image kick-up is to the offside |1.6.1| | 1 |
Brake reaction bracket insecure |3.2.A1j| | 1 |
Horn sounds harsh or grating |1.7.3c| | 1 |
Rear Brake component leaking fluid caliper |3.2.B4| | 1 |
Rear Lower Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Steering control handlebar movement restricted by trapped cables |2.1.2c| | 1 |
Nearside Footrest insecure |6.2.1a| | 1 |
Rear position lamp insecure |1.1.1c| | 1 |
Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Steering control has Insufficient clearance at full lock affecting the riders operation of the controls |2.1.2b| | 1 |
Front suspension assembly component cracked |2.3.1| | 1 |
Rear Brake excessively binding (1.2.1 (f)) | 1 |
Throttle operating incorrectly (6.2.7 (a) (i)) | 1 |
Offside Front Footrest insecure |6.2.1a| | 1 |
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Nearside Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Rear Brake pedal cannot be released smoothly |3.1.3d| | 1 |
Rear mono-shock pivot seized |2.4.B.4| | 1 |
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 1 |
Front Front suspension assembly has excessive free play in the pivot bearings. |2.3.2| | 1 |
Rear Rear mono-shock pivot excessively worn |2.4.B.4| | 1 |
Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Nearside Front Handlebar deformed |2.1.1b| | 1 |
Nearside Rear Footrest missing |6.2.1a| | 1 |
Offside Rear Footrest missing |6.2.1a| | 1 |
Front Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
Centre Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Centre Rear Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Lower Rear suspension component loose |2.4.A.1a| | 1 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Rear Stop lamp damaged and function impaired |1.3.3a| | 1 |
Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
Rear Brake disc|s| cracked |3.2.A1g| | 1 |
Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Nearside Front Direction indicator obscured |1.5.1a| | 1 |
Offside Front Direction indicator obscured |1.5.1a| | 1 |
Front position lamp missing |1.1.1a| | 1 |
Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 1 |
Offside Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Offside Front Lower Front suspension assembly component missing locking device |2.3.1| | 1 |
Nearside Front Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
Offside Front Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
Offside Rear Brake cylinder leaking hydraulic fluid caliper |3.2.B1e| | 1 |
Offside Front Upper Stop lamp does not illuminate immediately a brake applies front brake switch |1.3.1a| | 1 |
Front Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 1 |
Offside Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |
Front Brake disc contaminated (1.1.14 (b)) | 1 |
Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Rear Motorcycle structure excessively distorted |6.1.1a| | 1 |
Steering movement excessively rough with the weight on the lower bearing |2.2.1a| | 1 |
Nearside Front Direction indicators not working |1.5.1c| | 1 |
Nearside Rear Direction indicators not working |1.5.1c| | 1 |
Offside Rear Direction indicators not working |1.5.1c| | 1 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Nearside Rear Footrest insecure |6.2.1a| | 1 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Front Valve stem seriously damaged (5.2.3 (j)) | 1 |
Rear Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Rear Hydraulic brake control creeps under load. |3.1.4a| | 1 |
Nearside Front Direction indicator not working |1.5.1c| | 1 |
Offside Front Direction indicator not working |1.5.1c| | 1 |
Headlamp insecure |1.2.3b| | 1 |
Brake pedal cannot be released smoothly |3.1.3d| | 1 |
Stop lamp does not illuminate immediately a brake applies control one |1.3.1a| | 1 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 1 |
Front Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Front Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
Front Horn not working |1.7.3a| | 1 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Front Brake component is severely distorted |3.1.5| | 1 |
Lower Rear mono-shock pivot excessively worn |2.4.B.4| | 1 |
Rear Footrest missing |6.2.1a| | 1 |
Exhaust has part of the system missing |7.1.1a| | 1 |