Most common failures | No# failures |
---|
Headlamp aim out of alignment | 3 |
Headlamp insecure |1.2.3b| | 3 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 3 |
Registration plate issues | 3 |
Steering headbearing has excessive free play |2.2.2| | 2 |
Rear reflector on motorcycle missing |1.4.1| | 2 |
Drive chain worn to excess |6.2.1e| | 2 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 2 |
Throttle operating incorrectly |6.2.1f| | 2 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
Front Front suspension assembly excessive wear or free play in a front suspension component |2.3.4| | 1 |
Front Front wheel spindle securing nut locking device insecure |2.3.5a| | 1 |
Rear Front wheel spindle securing nut locking device insecure |2.3.5a| | 1 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Rear Brake pedal has insufficient reserve travel |1.1.2 |a|| | 1 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Front Headlamp aim headlamp damaged and function impaired |1.2.3a| | 1 |
Front Headlamp aim beam image kick up to the offside |1.6| | 1 |
Indicator tell tale not functioning |1.5.2| | 1 |
Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Brake pedal is positioned so that the brake cannot be readily applied |3.1.3c| | 1 |
Offside Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Nearside Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Front wheel spindle securing nut locking device insecure |2.3.5a| | 1 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Front wheel bearings are excessively rough |2.3.5b| | 1 |
Offside Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Horn control defective |1.7.2a| | 1 |
Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Fuel system component leaking |7.2.1a| | 1 |
Horn not working |1.7.3a| | 1 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Horn is not continous or uniform |1.7.3c| | 1 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Offside Rear Direction indicator insecure |1.5.3b| | 1 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
Nearside Front Footrest insecure |6.2.1a| | 1 |
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Front Brake hose leaking fluid |3.2.B4| | 1 |
Handlebar deformed |2.1.1b| | 1 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 1 |
Drive chain excessively tight |6.2.1d| | 1 |
Motorcycle structure excessively corroded |6.1.1a| | 1 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Offside Rear Direction indicator not working |1.5.1c| | 1 |
Front Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Nearside Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
Front wheel spindle securing nut locking device missing |2.3.3a| | 1 |
Offside Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Offside Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Rear Brake reaction bracket insecure |3.2.A1j| | 1 |
Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Nearside Rear Drive chain horseshoe locking device incorrectly fitted (6.1.7 (j) (i)) | 1 |
Offside Rear Lower Brake component insecure Nyloc nut missing brake torque arm (1.1.21 (c)) | 1 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |