Most common failures | No# failures |
---|
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 3 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 3 |
Offside Rear Footrest missing |6.2.1a| | 2 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Rear Footrest missing |6.2.1a| | 2 |
Drive chain excessively loose |6.2.1d| | 2 |
Drive chain worn to excess |6.2.1e| | 2 |
Rear suspension bearing has excessive free play |2.4.A2a|i|| | 2 |
Rear Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Rear Stop lamp does not emit a steady light |1.3.1b| | 1 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Headlamp insecure |1.2.3b| | 1 |
Rear position lamp insecure |1.1.1c| | 1 |
Front Brake locking device missing |3.2.A1e| | 1 |
Front Front wheel spindle securing nut locking device missing |2.3.3a| | 1 |
Rear Front wheel spindle securing nut locking device missing |2.3.3a| | 1 |
Rear Brake locking device missing |3.2.A1e| | 1 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 1 |
Rear Roller brake test indicates a severely juddering brake |3.3.A1b| | 1 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Front Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
Motorcycle structure excessively damaged |6.1.1a| | 1 |
Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
Brake linkage clevis joint excessively worn |3.2.A1d| | 1 |
Rear Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Front Brake master cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
Front Wheel damaged significantly reducing the original strength |4.2.1a| | 1 |
Front Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
Direction indicator damaged and function impaired |1.5.3a| | 1 |
An item not tested |Manual| | 1 |
Front Direction indicators not working |1.5.1c| | 1 |
Rear Direction indicators not working |1.5.1c| | 1 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Headlamp aim out of alignment | 1 |
Fuel system component insecure |7.2.1b| | 1 |
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Rear wheel spindle securing nut|s| loose |2.4.A.2b| | 1 |
Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Front Direction indicator insecure |1.5.3b| | 1 |
Drive chain fouling another component |6.2.1d| | 1 |
Steering headbearing has excessive free play |2.2.2| | 1 |
Fuel cap mounting flange/sealing method defective |7.2.2c| | 1 |
Nearside Rear Direction indicator not working |1.5.1c| | 1 |
Rear reflector on motorcycle missing |1.4.1| | 1 |