| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 40 |
| Drive chain excessively loose |6.2.1d| | 15 |
| Drive chain worn to excess |6.2.1e| | 14 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 10 |
| Wheel alignment incorrect which adversely affects the handling |2.5.1| | 9 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 9 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 7 |
| Rear Drive chain sprocket worn to excess |6.2.1e| | 7 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 7 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 7 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 7 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 7 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 6 |
| Horn not working |1.7.3a| | 6 |
| Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 5 |
| Offside Rear Footrest missing |6.2.1a| | 5 |
| Registration plate issues | 5 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 5 |
| Nearside Rear Footrest missing |6.2.1a| | 4 |
| Handlebar deformed |2.1.1b| | 4 |
| Roller brake test indicates a binding brake |3.3.A1a| | 3 |
| Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 3 |
| Front Wheel spoke excessively loose |4.2.1b| | 3 |
| Drive chain excessively loose (6.1.7 (c) (i)) | 3 |
| Headlamp aim beam image kick up to the offside |1.6| | 3 |
| Nearside Rear Direction indicator not working |1.5.1c| | 3 |
| Throttle operating incorrectly |6.2.1f| | 3 |
| Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 3 |
| Rear Drive chain excessively loose |6.2.1d| | 3 |
| Steering headbearing has excessive free play |2.2.2| | 3 |
| Drive chain excessively tight |6.2.1d| | 3 |
| Exhaust excessively deteriorated |7.1.1a| | 3 |
| Headlamp insecure (4.1.1 (c)) | 3 |
| Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 3 |
| Fuel system component leaking |7.2.1a| | 3 |
| Horn not working |7.7 |a| |ii|| | 2 |
| Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
| Nearside Rear Footrest missing |6.2.12 |a|| | 2 |
| Offside Rear Footrest missing |6.2.12 |a|| | 2 |
| Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
| Front All position lamps do not illuminate immediately when switched on |1.1.3a| | 2 |
| Rear Exhaust excessively deteriorated |7.1.1a| | 2 |
| Front Position lamp not working |4.2.1 |a|| | 2 |
| Rear suspension has corrosion which reduces the strength of a load bearing member or its supporting structure. |2.4.A.2d| | 2 |
| Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 2 |
| Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 2 |
| Stop lamp remains on when the brakes are released | 2 |
| Nearside Rear Footrest missing (6.2.12 (a)) | 2 |
| Headlamp insecure |1.2.3b| | 2 |
| Offside Rear Direction indicator not working (4.4.1 (a) (ii)) | 2 |
| Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 2 |
| Rear Position lamp not working (4.2.1 (a)) | 2 |
| Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 2 |
| Registration plate lamp issues | 2 |
| Rear Wheel spindle locking device missing (5.2.1 (d)) | 2 |
| Horn not loud enough to be heard by another road user |1.7.3a| | 2 |
| Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
| Rear Floor brake test indicates a severely grabbing brake |3.3.C2d| | 1 |
| Centre Rear Motorcycle structure excessively corroded |6.1.1a| | 1 |
| Horn is not a constant note |1.7.3c| | 1 |
| Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Nearside Rear Drive chain excessively tight |6.2.1d| | 1 |
| Central Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Central Front Front position lamp insecure loose bulb |1.1.1c| | 1 |
| Chain guard insecure |6.2.1c| | 1 |
| Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
| Offside Front Direction indicator likely to become detached (4.4.1 (c) (ii)) | 1 |
| Nearside Rear Direction indicator incorrect colour (4.4.3 (a)) | 1 |
| Front Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
| Rear Wheel spoke excessively bent |4.2.1b| | 1 |
| Front Handlebar deformed |2.1.1b| | 1 |
| Front Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
| Rear Drive chain worn to excess |6.2.1e| | 1 |
| Front suspension fouling which affects the movement of the front suspension. clamp on right fork leg |2.3.6a| | 1 |
| Nearside Front Footrest insecure mount bracket deformed |6.2.1a| | 1 |
| Offside Front Footrest insecure mount bracket deformed |6.2.1a| | 1 |
| Nearside Rear Footrest insecure rear footrests point down |6.2.1a| | 1 |
| Offside Rear Footrest insecure pillion footrests point down |6.2.1a| | 1 |
| Stop lamp does not illuminate immediately a brake applies front stop light |1.3.1a| | 1 |
| Offside Rear Direction indicator not working |1.5.1c| | 1 |
| Nearside Front Direction indicator insecure |1.5.3b| | 1 |
| Offside Rear Direction indicator insecure |1.5.3b| | 1 |
| Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking lower front engine bolt missing |6.1.1c| | 1 |
| Rear Wheel spoke missing loose spokes and broken |4.2.1b| | 1 |
| Drive chain sprocket carrier worn to excess carrier bearing |6.2.1e| | 1 |
| Brake back plate|s| securing bolt|s| missing |3.2.A1j| | 1 |
| Rear Brake pedal is positioned so that the brake cannot be readily applied |3.1.3c| | 1 |
| Handlebar excessively deformed |2.2.1 |c| |i|| | 1 |
| Drive chain worn to excess |6.1.7 |c| |i|| | 1 |
| Headlamp light intensity severely reduced |4.1.4 |a|| | 1 |
| Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Rear Brake locking device missing |3.2.A1e| | 1 |
| Rear Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
| Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Brake locking device missing Rear brake torque arm. |3.2.A1e| | 1 |
| Brake locking device missing Rear brake pedal / rod. |3.2.A1e| | 1 |
| Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
| Offside Front Steering lock stop ineffective |2.1.3| | 1 |
| Rear Position lamp not working |4.2.1 |a|| | 1 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Front suspension has inadequate damping effect. |2.3.6c| | 1 |
| Rear Brake back plate insecure (1.1.14 (d)) | 1 |
| Rear Brake component insecure nut loose on brake bar (1.1.21 (c)) | 1 |
| Rear Wheel bearing play so excessive it is likely to break up (5.1.3 (a) (ii)) | 1 |
| Rear Brake component insecure nut and bolt missing brake arm (1.1.21 (c)) | 1 |
| Rear reflector missing (4.8.2 (a) (ii)) | 1 |
| Rear reflector missing |4.8.2 |a| |ii|| | 1 |
| Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
| Stop lamp showing white light to the rear |4.3.3 |a| |ii|| | 1 |
| Stop lamp light intensity significantly reduced |4.3.3 |a| |ii|| | 1 |
| Stop lamp lens defective such that the emitted light is adversely affected |4.3.1 |b| |ii|| | 1 |
| Central Rear Brake pivot excessively worn brake lever pivot pin |1.1.15 |b|| | 1 |
| Central Front Position lamp not working |4.2.1 |a|| | 1 |
| Nearside Rear Footrest insecure |6.2.1a| | 1 |
| Offside Rear Footrest insecure |6.2.1a| | 1 |
| Rear reflector on motorcycle obscured |1.4.1| | 1 |
| Offside Front Direction indicator not working |1.5.1c| | 1 |
| Rear Brake component modification unsafe Brake backplate to torque arm joint has inadequate securing bolt allowing excess movement. (1.1.21 (d) (i)) | 1 |
| Front Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
| Drive chain excessively tight, so that it is likely to fail (6.1.7 (k) (ii)) | 1 |
| Rear Drive chain sprocket so worn it is likely to fail (6.1.7 (c) (ii)) | 1 |
| Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
| Brake disc significantly and obviously worn Below min wear limit (1.1.14 (a) (i)) | 1 |
| Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
| Rear Brake grabbing severely (1.2.1 (c)) | 1 |
| Stop lamp does not illuminate immediately a brake applies With front brake |1.3.1a| | 1 |
| Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Offside Rear Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
| Front Brake lever cannot be released smoothly |3.1.3d| | 1 |
| Front Brake lever cannot be applied smoothly |3.1.3d| | 1 |
| Front Headlamp insecure |1.2.3b| | 1 |
| Rear Rear wheel spindle securing nut|s| loose |2.4.A.2b| | 1 |
| Nearside Rear Direction indicator not working |4.4.1 |a| |ii|| | 1 |
| Offside Front Direction indicator not working |4.4.1 |a| |ii|| | 1 |
| Front Steering headbearing has excessive wear or free play |2.2.2 |f| |i|| | 1 |
| Nearside Rear Drive chain so loose it is likely to fail |6.1.7 |c| |ii|| | 1 |
| Rear Suspension arm pin or bush excessively worn |5.3.4 |a| |i|| | 1 |
| Drive chain excessively loose |6.1.7 |c| |i|| | 1 |
| Rear Wheel bearing has excessive play |5.1.3 |a| |i|| | 1 |
| Headlamp aim so that beam "kick up" is not visible on the screen |4.1.2 |a|| | 1 |
| Nearside Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
| Front Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
| Rear Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
| Headlamp switch faulty |1.2.4| | 1 |
| Front Brake lever is positioned so that the brake cannot be readily applied |3.1.3c| | 1 |
| Rear Motorcycle structure excessively corroded REAR SWING ARM CORRODED |6.1.1a| | 1 |
| Rear Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
| Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
| Front Brake excessively binding |1.2.1 |f|| | 1 |
| Throttle control functioning such that safe operation of the motorcycle is adversely affected |6.2.7 |a| |ii|| | 1 |
| Dipswitch does not deflect the main beam/s, making them into dipped beam/s sticking slightly and keeping high beam on when on low beam, free up switch. |1.2.2b|ii|| | 1 |
| Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
| Headlamp main beam affected by the operation of another lamp |1.2.2c| | 1 |
| Central Front Position lamp not working (4.2.1 (a)) | 1 |
| Front Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
| Front Headlamp not working on main beam |4.1.1 |a| |ii|| | 1 |
| Offside Rear Direction indicator likely to become detached |4.4.1 |c| |ii|| | 1 |
| Offside Rear Direction indicator obviously incorrectly positioned |4.4.3 |a|| | 1 |
| Rear Stop lamp does not illuminate immediately a brake applies Does not Illuminate with Front or Rear Brake Levers Applied |1.3.1a| | 1 |
| Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
| Steering linkage has excessive free play |2.2.2| | 1 |
| Front Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
| Front mudguard insecure |2.3.7| | 1 |
| Rear Footrest missing |6.2.1a| | 1 |
| Throttle control functioning such that safe operation of the motorcycle is adversely affected (6.2.7 (a) (ii)) | 1 |
| Front Steering operation restricted in free movement from lock to lock (2.1.4 (c)) | 1 |
| Front Brake master cylinder insecure (1.1.10 (c)) | 1 |
| Drive chain worn to excess (6.1.7 (c) (i)) | 1 |
| Drive chain sprocket worn to excess (6.1.7 (c) (i)) | 1 |
| Drive chain sprocket carrier worn to excess |6.2.1e| | 1 |
| Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
| Nearside Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |
| Brake lagging in operation rear pedal sticks down after application , looks like bad adjustment causing issue (1.2.1 (d)) | 1 |
| Front Brake lever has insufficient reserve travel lever almost touches bar as wheel locks (1.1.2 (a)) | 1 |
| Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
| Offside Rear Footrest missing (6.2.12 (a)) | 1 |
| Rear Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
| Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Rear Brake pedal is inoperative |3.1.3c| | 1 |
| Rear Brake pedal is damaged and the brake cannot be readily applied |3.1.3c| | 1 |
| Rear Brake performance not tested |3.3| | 1 |
| Offside Rear Lower Brake locking device missing |3.2.A1e| | 1 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |
| Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Rear Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |
| Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Front Drive chain sprocket worn to excess |6.2.1e| | 1 |
| Front Motorcycle structure excessively corroded |6.1.1a| | 1 |
| Rear Brake linkage excessively corroded |3.2.A1c| | 1 |
| Front position lamp insecure |1.1.1c| | 1 |
| Front Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
| Drive chain so loose it is likely to fail (6.1.7 (c) (ii)) | 1 |
| Headlamp aim projected beam image obviously incorrect (4.1.2 (c)) | 1 |
| Rear Footrest missing pillion footrests (6.2.12 (a)) | 1 |
| Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
| Riders seat insecure |6.2.1a| | 1 |
| Front Brake excessively binding (1.2.1 (f)) | 1 |
| Rear Suspension arm pin or bush excessively worn Swinging arm bearings (5.3.4 (a) (i)) | 1 |
| Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
| Nearside Rear Drive chain excessively loose (6.1.7 (c) (i)) | 1 |
| Nearside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Front Direction indicator likely to become detached |4.4.1 |c| |ii|| | 1 |
| Front suspension assembly component loose |2.3.1| | 1 |
| Nearside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
| Nearside Fuel system component leaking fuel tap leaking (6.1.3 (b) (i)) | 1 |
| Throttle control functioning such that safe operation of the motorcycle is adversely affected throttle/revs sticking excessively high (6.2.7 (a) (ii)) | 1 |
| Brake pedal not releasing correctly and functionality of brakes affected |1.1.2 |b| |ii|| | 1 |
| Steering headbearing has excessive wear or free play |2.2.2 |f| |i|| | 1 |
| Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
| Front Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Rear Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Front Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
| Motorcycle structure excessively corroded |6.1.1a| | 1 |
| Front wheel bearings have excessive free play |2.3.5b| | 1 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Nearside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Rear Brake grabbing severely sticking on (1.2.1 (c)) | 1 |
| Rear Built up wheel has a missing rivet/s |4.2.1c| | 1 |
| Front position lamp missing |1.1.1a| | 1 |
| Front Direction indicator missing |1.5.1a| | 1 |
| Headlamp damaged and function impaired |1.2.3a| | 1 |
| Lower Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Centre Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Centre Rear Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
| Front Position lamp not working (4.2.1 (a)) | 1 |
| Stop lamp not working rear brake (4.3.1 (a) (ii)) | 1 |
| Rear Suspension arm corroded and seriously weakened |5.3.3 |b| |i|| | 1 |
| Rear Brake clevis joint excessively worn brake rod ends |1.1.15 |b|| | 1 |
| Brake locking device insecure |3.2.A1e| | 1 |
| Rear Front wheel bearings have excessive free play |2.3.5b| | 1 |
| Offside Front Footrest insecure |6.2.1a| | 1 |
| Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |