Most common failures | No# failures |
---|
Headlamp aim out of alignment | 14 |
Drive chain excessively loose |6.2.1d| | 12 |
Drive chain worn to excess |6.2.1e| | 10 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 7 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 6 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 6 |
Registration plate issues | 4 |
Nearside Front Direction indicator not working |1.5.1c| | 4 |
Handlebar deformed |2.1.1b| | 3 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Rear Drive chain excessively loose |6.2.1d| | 3 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 3 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 2 |
Rear Position lamp not working (4.2.1 (a)) | 2 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 2 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 2 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 2 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Headlamp aim beam image kick up to the offside |1.6| | 2 |
Front suspension assembly component excessively misaligned |2.3.1| | 2 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
Drive chain sprocket carrier worn to excess |6.2.1e| | 1 |
Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Front Brake caliper|s| securing bolt|s| loose |3.2.A1j| | 1 |
Front Brake caliper|s| securing bolt|s| missing |3.2.A1j| | 1 |
Offside Rear Direction indicator insecure |1.5.3b| | 1 |
Nearside Front Footrest insecure |6.2.1a| | 1 |
Offside Front Footrest insecure |6.2.1a| | 1 |
Offside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Front Position lamp not working (4.2.1 (a)) | 1 |
Stop lamp not working Rear brake stop lamp (4.3.1 (a) (ii)) | 1 |
Stop lamp not working Front brake stop lamp (4.3.1 (a) (ii)) | 1 |
All direction indicators not working (4.4.1 (a) (ii)) | 1 |
Nearside Rear Direction indicators not working |1.5.1c| | 1 |
Offside Rear Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
Rear position lamp flickers when tapped lightly by hand |1.1.3c| | 1 |
Throttle operating incorrectly |6.2.1f| | 1 |
Horn not working |1.7.3a| | 1 |
Offside Direction indicator not working |1.5.1c| | 1 |
Rear Brake component worn and seriously reduced in strength |3.2.A1| | 1 |
Front wheel bearings are excessively rough |2.3.5b| | 1 |
Nearside Rear Direction indicator missing |1.5.1a| | 1 |
Offside Rear Direction indicator missing |1.5.1a| | 1 |
Direction indicators not working |1.5.1c| | 1 |
Rear position lamp insecure |1.1.1c| | 1 |
Offside Footrest insecure |6.2.1a| | 1 |
Front wheel spindle securing nut locking device missing |2.3.3a| | 1 |
Rear wheel insecure |4.2.3b| | 1 |
Nearside Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Drive chain worn to excess (6.1.7 (c) (i)) | 1 |
Drive chain so worn it is likely to fail (6.1.7 (c) (ii)) | 1 |
Front Direction indicators not working |1.5.1c| | 1 |
Offside Front Brake lever has insufficient reserve travel |1.1.2 |a|| | 1 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
Offside Rear Direction indicators not working |1.5.1c| | 1 |
Offside Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Rear Brake reaction bracket securing bolt|s| missing |3.2.A1j| | 1 |
Rear Wheel spindle or securing nut(s) so insecure that wheel security or steering control is adversely affected (5.2.1 (c) (ii)) | 1 |
Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Front Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
Front Front suspension assembly component excessively bent |2.3.1| | 1 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Rear Wheel spindle locking device missing (5.2.1 (d)) | 1 |
Steering headbearing has excessive free play |2.2.2| | 1 |
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Front wheel bearings are excessively rough (2.3.5b) | 1 |
Brake pedal is positioned so that the brake cannot be readily applied break lever needs adjustment |3.1.3c| | 1 |
Brake pedal cannot be released smoothly rear break locking |3.1.3d| | 1 |
Rear Footrest missing |6.2.1a| | 1 |
Front Steering headbearing has excessive free play |2.2.2| | 1 |
Front Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
Rear Brake locking device missing |3.2.A1e| | 1 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Rear Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
Rear Wheel has an excessively eccentric bead rim. |4.2.2| | 1 |
Front Horn not working |1.7.3a| | 1 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Nearside Drive chain excessively tight |6.2.1d| | 1 |
Drive chain horseshoe locking device incorrectly fitted (6.1.7 (j) (i)) | 1 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Rear Drive chain sprocket carrier worn to excess |6.2.1e| | 1 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Steering headbearing in such a condition that steering control is adversely affected Very tight /notchy |2.2.2 |f| |ii|| | 1 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
Nearside Footrest insecure |6.2.1a| | 1 |
Headlamp aim not tested |1.6| | 1 |
Central Rear Roller brake test indicates excessive fluctuation of brake effort rear brake excessive fluctuation |3.3.A1d| | 1 |
Central Front Front position lamp missing Position Lamp Front N/W |1.1.1a| | 1 |
Offside Front Throttle operating incorrectly throttle does not shut down quickly |6.2.1f| | 1 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Centre Front Upper Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Centre Rear Lower Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Offside Front Direction indicator damaged and function impaired |1.5.3a| | 1 |
Headlamp insecure |1.2.3b| | 1 |
Front Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |