>

MOT History from tests of petrol SUZUKI FL125s year 2007

Review the list of common SUZUKI FL125 failures below or to perform a specific mot history check on your SUZUKI then use our popular KnowYourCar service

mot history
Pass percent:86.53%
(The average a petrol SUZUKI FL125 year 2007 passes without issue)
Based on:193 MOT Tests
Most common failuresNo# failures
Front Roller brake test indicates a binding brake |3.3.A1a|2
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||2
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a|2
Drive chain excessively loose |6.2.1d|2
Drive chain excessively loose (6.1.7 (c) (i))1
Horn not working |1.7.3a|1
Nearside Rear Direction indicator not working |1.5.1c|1
Riders seat insecure |6.2.1a|1
Headlamp aim out of alignment1
Exhaust mounting missing |7.1.1c|1
Offside Brake pedal anti-slip provision missing (1.1.2 (c))1
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a|1
Steering movement excessively stiff with the wheel raised |2.2.1b|1
Rear shock absorber has inadequate damping effect. |2.4.A.3b|1
Nearside Steering headbearing has excessive free play |2.2.2|1
Indicator tell tale not functioning |1.5.2|1
Stop lamp remains on when the brake is released |1.3.1e|1
Front Wheel spoke excessively loose |4.2.1b|1
Chain guard insecure |6.2.1c|1
Rear Stop lamp remains on when the brake is released |1.3.1e|1
Nearside Front Handlebar handgrip not secure to handlebars. |2.1.1c|1
Rear Brake pedal has inadequate reserve travel |3.1.3b|1
Stop lamp remains on when the brakes are released1
Drive chain worn to excess |6.2.1e|1
Front Drive chain sprocket worn to excess |6.2.1e|1
Rear Floor brake test indicates a sticking brake |3.3.C2c|1
Front Exhaust has a major leak of exhaust gases (6.1.2 (a))1
Rear Brake excessively binding (1.2.1 (f))1
Front Floor brake test indicates a sticking brake |3.3.C2c|1
Nearside Handlebar grip insecure to handlebar (2.2.1 (d) (ii))1
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b|1
Rear Brake lining|s| less than 1.5 mm thick |3.2.A1f|i||1
Rear Floor brake test indicates a severely grabbing brake |3.3.C2d|1
Headlamp at least one does not illuminate on main beam |1.2.2a|ii||1
Nearside Footrest insecure |6.2.1a|1
Centre Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||1
Rear Roller brake test indicates a sticking brake |3.3.A1a|1
Front Headlamp insecure (4.1.1 (c))1
Front Footrest insecure (6.2.12 (a))1
Front Brake excessively binding (1.2.1 (f))1
Rear Brake pedal has insufficient reserve travel (1.1.2 (a))1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Find us on Facebook

© KnowYourCar™ 2019. All rights reserved
Except where otherwise noted, content on our MOT statistics pages are licensed under a Creative Commons Attribution 4.0 International license.
You are free to redistribute the material in any medium or format as long as credit is given to KnowYourCar

WARNING: We have placed hidden watermarks in our data. We will take action against our data being used outside of these terms.

MOT Data licensed under the Open Government Licence v3.0

By using our site you are agreeing to our terms and conditions
Terms & Conditions  Privacy Policy