MOT History from tests of petrol SUZUKI FLs year 2010

Review the list of common SUZUKI FL failures below or to perform a specific mot history check on your SUZUKI then use our popular KnowYourCar service

mot history

Pass percent:89.16%

(The average a petrol SUZUKI FL year 2010 passes without issue)

Based on:369 MOT Tests

Most common failures	No# failures
Headlamp aim out of alignment	8
Direction indicator incorrect colour \|1.5.1b\|	2
Drive chain excessively loose \|6.2.1d\|	2
Fuel cap sealing washer missing \|7.2.2c\|	1
Rear Stop lamp switch with a delay in operation (4.3.2 (a) (ii))	1
Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	1
Stop lamp missing \|1.3.3a\|	1
Steering headbearing has excessive free play \|2.2.2\|	1
Headlamp at least one does not illuminate on main beam \|1.2.2a\|ii\|\|	1
Headlamp insecure \|1.2.3b\|	1
Drive chain excessively tight \|6.2.1d\|	1
Brake lever cannot be applied smoothly \|3.1.3d\|	1
Front Lower Brake component is excessively corroded \|3.1.5\|	1
Nearside Drive chain excessively tight \|6.2.1d\|	1
Central Front Headlamp not working on dipped beam \|4.1.1 \|a\| \|ii\|\|	1
Central Front Horn not working \|7.7 \|a\| \|ii\|\|	1
Front Front position lamp does not illuminate immediately when switched on \|1.1.3a\|	1
Horn not working \|1.7.3a\|	1
Rear Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii))	1
Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	1
Front Brake lever cannot be applied smoothly \|3.1.3d\|	1
Drive chain excessively tight \|6.1.7 \|k\| \|i\|\|	1
Front Roller brake test indicates a severely juddering brake \|3.3.A1b\|	1
Rear Brake lining\|s\| less than 1.5 mm thick \|3.2.A1f\|i\|\|	1
Rear reflector on motorcycle obscured \|1.4.2b\|	1
Registration plate issues	1
Front wheel spindle loose \|2.3.3a\|	1
Nearside Front Direction indicator not working (4.4.1 (a) (ii))	1
Centre Front Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	1
Rear Exhaust system insecure \|6.1.2 \|a\|\|	1
Front Dipswitch does not operate immediately when selected on dipped beam (4.1.3 (b))	1
Rear Motorcycle structure joining/attachment plate or fastening insecure (6.1.1 (b) (i))	1
Front Direction indicator not working \|1.5.1c\|	1
Front Roller brake test indicates a severely grabbing brake \|3.3.A1b\|	1
Front Brake disc\|s\| friction surface contaminated by oil or grease \|3.2.A1k\|	1
Nearside Rear Drive chain excessively loose \|6.2.1d\|	1
Offside Rear Brake pedal cannot be released smoothly \|3.1.3d\|	1
Rear Rear wheel spindle securing nut\|s\| loose \|2.4.A.2b\|	1
Front Brake caliper\|s\| securing bolt\|s\| missing \|3.2.A1j\|	1
Front position lamp insecure \|1.1.1c\|	1
Rear Drive chain excessively loose sprocket loose \|6.2.1d\|	1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Most common failures	No# failures
Headlamp aim out of alignment	8
Direction indicator incorrect colour \|1.5.1b\|	2
Drive chain excessively loose \|6.2.1d\|	2
Fuel cap sealing washer missing \|7.2.2c\|	1
Rear Stop lamp switch with a delay in operation (4.3.2 (a) (ii))	1
Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	1
Stop lamp missing \|1.3.3a\|	1
Steering headbearing has excessive free play \|2.2.2\|	1
Headlamp at least one does not illuminate on main beam \|1.2.2a\|ii\|\|	1
Headlamp insecure \|1.2.3b\|	1
Drive chain excessively tight \|6.2.1d\|	1
Brake lever cannot be applied smoothly \|3.1.3d\|	1
Front Lower Brake component is excessively corroded \|3.1.5\|	1
Nearside Drive chain excessively tight \|6.2.1d\|	1
Central Front Headlamp not working on dipped beam \|4.1.1 \|a\| \|ii\|\|	1
Central Front Horn not working \|7.7 \|a\| \|ii\|\|	1
Front Front position lamp does not illuminate immediately when switched on \|1.1.3a\|	1
Horn not working \|1.7.3a\|	1
Rear Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii))	1
Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	1
Front Brake lever cannot be applied smoothly \|3.1.3d\|	1
Drive chain excessively tight \|6.1.7 \|k\| \|i\|\|	1
Front Roller brake test indicates a severely juddering brake \|3.3.A1b\|	1
Rear Brake lining\|s\| less than 1.5 mm thick \|3.2.A1f\|i\|\|	1
Rear reflector on motorcycle obscured \|1.4.2b\|	1
Registration plate issues	1
Front wheel spindle loose \|2.3.3a\|	1
Nearside Front Direction indicator not working (4.4.1 (a) (ii))	1
Centre Front Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	1
Rear Exhaust system insecure \|6.1.2 \|a\|\|	1
Front Dipswitch does not operate immediately when selected on dipped beam (4.1.3 (b))	1
Rear Motorcycle structure joining/attachment plate or fastening insecure (6.1.1 (b) (i))	1
Front Direction indicator not working \|1.5.1c\|	1
Front Roller brake test indicates a severely grabbing brake \|3.3.A1b\|	1
Front Brake disc\|s\| friction surface contaminated by oil or grease \|3.2.A1k\|	1
Nearside Rear Drive chain excessively loose \|6.2.1d\|	1
Offside Rear Brake pedal cannot be released smoothly \|3.1.3d\|	1
Rear Rear wheel spindle securing nut\|s\| loose \|2.4.A.2b\|	1
Front Brake caliper\|s\| securing bolt\|s\| missing \|3.2.A1j\|	1
Front position lamp insecure \|1.1.1c\|	1
Rear Drive chain excessively loose sprocket loose \|6.2.1d\|	1

MOT History from tests of petrol SUZUKI FLs year 2010

Find us on Facebook