Most common failures | No# failures |
---|
Headlamp aim out of alignment | 31 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 16 |
Drive chain worn to excess |6.2.1e| | 12 |
Rear reflector on motorcycle missing |1.4.1| | 12 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 11 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 11 |
Drive chain excessively loose |6.2.1d| | 10 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 7 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 6 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 5 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 5 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 5 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 5 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 5 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
Rear Brake pedal has inadequate reserve travel |3.1.3b| | 4 |
Horn not working |1.7.3a| | 4 |
Drive chain excessively tight |6.2.1d| | 4 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 4 |
Exhaust is leaking and excessively noisey |7.1.1b| | 3 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 3 |
Registration plate issues | 3 |
Chain guard insecure |6.2.1c| | 3 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 3 |
Rear Position lamp not working (4.2.1 (a)) | 3 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 3 |
Rear reflector on motorcycle obscured |1.4.1| | 3 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 2 |
Rear Drive chain worn to excess |6.2.1e| | 2 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 2 |
Drive chain sprocket worn to excess |6.2.1e| | 2 |
Drive chain sprocket carrier worn to excess |6.2.1e| | 2 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Stop lamp remains on when the brake is released |1.3.1e| | 2 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 2 |
Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 2 |
Stop lamp affected by the operation of another lamp |1.3.2| | 2 |
Rear Stop lamp not working |4.3.1 |a| |ii|| | 2 |
Nearside Front Footrest insecure |6.2.1a| | 2 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
Wheel alignment incorrect which adversely affects the handling (2.4 (a)) | 2 |
Rear reflector missing (4.8.2 (a) (ii)) | 2 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 2 |
Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 2 |
Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 2 |
Drive chain worn to excess |6.1.7 |c| |i|| | 2 |
Rear Rear reflector on motorcycle missing |1.4.1| | 2 |
Throttle operating incorrectly |6.2.1f| | 2 |
Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 2 |
Front Wheel alignment incorrect which adversely affects the handling |2.5.1| | 2 |
Direction indicators not working |1.5.1c| | 2 |
Registration plate lamp issues | 1 |
Centre Rear reflector on motorcycle obscured |1.4.1| | 1 |
Brake lever cannot be applied smoothly |3.1.3d| | 1 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Rear Drive chain sprocket carrier worn to excess |6.2.1e| | 1 |
Front Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
Brake lever attachment screws loose |3.1.2b| | 1 |
Headlamp aim beam image kick up to the offside |1.6| | 1 |
Nearside Rear Direction indicator not working |1.5.1c| | 1 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Front Drive chain worn to excess |6.2.1e| | 1 |
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 1 |
Front suspension assembly component excessively bent both fork tubes bent |2.3.1| | 1 |
Front shock absorber seal failed and leaking oil n/s fork seal leaking oil |2.3.3| | 1 |
Stop lamp does not illuminate immediately a brake applies front and rear stop lamps not working |1.3.1a| | 1 |
Stop lamp insecure n/s front direction indicator not secure |1.3.3b| | 1 |
Rear Footrest missing |6.2.1a| | 1 |
Centre Front Headlamp insecure |1.2.3b| | 1 |
Nearside Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Centre Front Rear reflector on motorcycle obscured |1.4.1| | 1 |
Offside Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Centre Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
Centre Front wheel bearings have excessive free play |2.3.5b| | 1 |
Centre Rear Drive chain worn to excess |6.2.1e| | 1 |
Centre Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Rear Chain guard insecure |6.2.1c| | 1 |
Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Nearside Rear Footrest missing |6.2.1a| | 1 |
Offside Rear Footrest missing |6.2.1a| | 1 |
Exhaust excessively deteriorated |7.1.1a| | 1 |
Nearside Rear Direction indicators not working |1.5.1c| | 1 |
Offside Front Direction indicator insecure |1.5.3b| | 1 |
Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Rear reflector on motorcycle obscured |1.4.2b| | 1 |
Front position lamp deteriorated and function impaired |1.1.1b| | 1 |
Rear position lamp deteriorated and function impaired |1.1.1b| | 1 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride Drive chain locking device fitted incorectly |6.2.1h| | 1 |
Rear Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Stop lamp does not illuminate immediately a brake applies rear control |1.3.1a| | 1 |
Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Front Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
Front Brake master cylinder fluid level dangerously low |3.2.B1d| | 1 |
Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
Offside Steering control handlebar movement restricted by taut cables |2.1.2c| | 1 |
Rear Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 1 |
Drive chain excessively loose |6.1.7 |c| |i|| | 1 |
Headlamp insecure (4.1.1 (c)) | 1 |
Drive chain excessively tight (6.1.7 (k) (i)) | 1 |
Drive chain horseshoe locking device incorrectly fitted (6.1.7 (j) (i)) | 1 |
Headlamp switch faulty |1.2.4| | 1 |
Nearside Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Rear Brake locking device missing |3.2.A1e| | 1 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
Brake performance not tested |3.3| | 1 |
Front Brake excessively binding (1.2.1 (f)) | 1 |
Offside Handlebar deformed |2.1.1b| | 1 |
Rear Floor brake test indicates a severely grabbing brake |3.3.C2d| | 1 |
Front Brake lever is bent and the brake cannot be readily applied |3.1.3c| | 1 |
Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Fuel cap sealing washer deteriorated |7.2.2c| | 1 |
Stop lamp does not emit a steady light |1.3.1b| | 1 |
Fuel hose leaking |7.2.1a| | 1 |
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Brake pedal has insufficient reserve travel (1.1.2 (a)) | 1 |
Rear Footrest missing (6.2.12 (a)) | 1 |
Nearside Rear Drive chain sprocket so loose it is likely to fail rear sprocket is loose and no lock tabs fitted (6.1.7 (c) (ii)) | 1 |
Offside Rear Brake component insecure rear brake tie arm security device missing (split pin) (1.1.21 (c)) | 1 |
Front Position lamp not working front marker light not functioning (4.2.1 (a)) | 1 |
Rear Rear reflector missing rear reflector not fitted/or covered (4.8.2 (a) (ii)) | 1 |
Rear Stop lamp switch with a delay in operation rear stop lamp requires excessive force to operate (4.3.2 (a) (ii)) | 1 |
Front Headlamp aim projected beam image obviously incorrect both high/low beam have very poor pattern on tester (bulb incorrectly fitted) (4.1.2 (c)) | 1 |
Stop lamp not working off foot control |4.3.1 |a| |ii|| | 1 |
Headlamp not working on main beam |4.1.1 |a| |ii|| | 1 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Front Brake excessively binding |1.2.1 |f|| | 1 |
Drive chain sprocket worn to excess |6.1.7 |c| |i|| | 1 |
Offside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Front wheel bearings are excessively rough |2.3.5b| | 1 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Rear Brake pedal is inoperative |3.1.3c| | 1 |
Rear reflector defective or damaged by more than 50% of the reflecting surface |4.8.1 |a| |ii|| | 1 |
Front Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
Rear Brake lever excessively damaged |3.2.A1c| | 1 |
Front Fork yoke deformed |2.1.1b| | 1 |
Offside Front Footrest insecure |6.2.1a| | 1 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Rear Wheel spindle locking device missing (5.2.1 (d)) | 1 |
Brake pedal cannot be applied smoothly |3.1.3d| | 1 |
Handlebar deformed |2.1.1b| | 1 |
Headlamp aim headlamp damaged and function impaired |1.2.3a| | 1 |
Rear suspension component excessively corroded. |2.4.A.1a| | 1 |
Offside Front Direction indicator not working |1.5.1c| | 1 |
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Front Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
Headlamp insecure |1.2.3b| | 1 |
Rear Brake lining|s| less than 1.5 mm thick |3.2.A1f|i|| | 1 |
Rear wheel bearings are excessively rough |2.4.A.2c| | 1 |
Rear reflector on motorcycle incorrectly positioned |1.4.2d| | 1 |
Stop lamp obscured |1.3.1c| | 1 |
Horn control not functioning. |1.7.2b| | 1 |
Rear wheel spindle loose |2.4.A.2b| | 1 |
Rear Position lamp not working |4.2.1 |a|| | 1 |
Front Dipswitch does not extinquish main beam/s, leaving at least 1 dipped beam headlamp |1.2.2b|i|| | 1 |
Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
Drive chain excessively loose (6.1.7 (c) (i)) | 1 |
Rear Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Front Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Rear Drive chain sprocket worn to excess |6.1.7 |c| |i|| | 1 |
Rear Wheel bearing has excessive play |5.1.3 |a| |i|| | 1 |
Rear Brake grabbing severely |1.2.1 |c|| | 1 |
Motorcycle structure joining/attachment plate or fastening insecure (6.1.1 (b) (i)) | 1 |
Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Centre Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Rear Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Nearside Rear Footrest missing (6.2.12 (a)) | 1 |
Offside Rear Footrest missing (6.2.12 (a)) | 1 |
Front Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Rear wheel has a loose wheel nut|s| |4.2.3a| | 1 |
Front Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Stop lamp not working REAR BRAKE |4.3.1 |a| |ii|| | 1 |
Chain guard insecure |6.1.7 |i|| | 1 |
Nearside Rear Footrest missing Dual seat fitted and no side grab handle |6.2.12 |a|| | 1 |
Nearside Rear Footrest missing |6.2.12 |a|| | 1 |
Rear reflector on motorcycle does not reflect squarely to the rear |1.4.1| | 1 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |